3D-Druck , Überblick



Beschreibung

Druckköpfe für viskose Medien im 3D-Druck

Wir fokussieren uns auf die Zulieferung der Druckköpfe und deren Produktzuführung für industrielle und professionelle 3D-Anwendungen von viskosen Medien.


background image

We focus on the delivery of the print heads and their supply for industrial and professional 3D applications of viscous fl uids.

PRINT HEADS FOR VISCOUS FLUIDS IN 3D PRINTING

background image

[

3

]

[

2

]

ADDED VALUE FOR THE CUSTOMER

Our tried and tested endless piston principle off ers nu-
merous advantages to the customer. Apart from the fea-
sibility of non-component-dependent sizes, the precisi-
on of the technology is a high priority.

In addition, the endless piston principle is a technology
for a wide range of product materials. Not to be disre-
garded is the fact that a wide range of material proper-
ties can be covered.

OUR TECHNOLOGY

Volumetric dosing and fi lling systems are based on
the ENDLESS PISTON PRINCIPLE and are used in low
to high viscosity fl uids.

At the heart of each application is a dosing pump
which is purely volumetrically fed. The interaction
between the rotor and the stator results in a feeding
and dosing characteristic which is the same as an end-
lessly moving piston.

This results in a pressure-stable linear pump charac-
teristic curve. This allows a clear statement about the
ratio of revolution, time and dosed volume. There-
fore, a constant volume can be dosed either via the
time function or via the number of revolutions func-
tion, and give a dosing accuracy at the pump outlet
of 1% (depending on the material), which in practice
falls below this.

TECHNOLOGY USING THE ENDLESS
PISTON PRINCIPLE

1-COMPONENT PRINT HEAD –

vipro-HEAD3

The print head impresses with its unique precision and is suitable for
nearly all one-component fl uids.

Volume fl ow:

0.3 - 3.3 ml/min

Weight:

ca. 750 g

1-COMPONENT PRINT HEAD –

vipro-HEAD5

The print head creates new possibilities in a wide range of applications.
A consistent and accurate print result – coupled with a high printing
speed – is guaranteed.

Volume fl ow:

0.5 - 6.0 ml/min

Weight:

ca. 750 g

2-COMPONENT PRINT HEAD  –

ViscoDUO-FDD 4/4

The print head allows a wide range of applications for viscous two-com-
ponent fl uids. The desired mixing ratio can be adjusted via the speed
ratio of the drive units.

Volume fl ow:

0.2 - 12 ml/min

Weight:

ca. 1,100 g

MATERIAL SUPPLY

Everything from one source – that is the guiding principle of ViscoTec.
Therefore, the end customer not only has the possibility to purchase
print heads from ViscoTec; but also the appropriate emptying and de-
gassing systems are the customer’s choice.

PRODUCT OVERVIEW

background image

[

5

]

[

4

]

NEW 1-COMPONENT PRINT HEAD

STEP MOTOR

Control via 3D print signals

Intelligent removal of motor heat through targeted
design

MATERIAL SUPPLY & BLEED

Easy product handling

Uncomplicated bleeding process

HEATING FUNCTION

Heating of viscous fl uids and pastes

Optimal heat distribution of parts in contact with
medium

ENDLESS PISTON PRINCIPLE

Non-stop-dosing

For almost all viscous fl uids and pastes

LUER-LOCK / THREAD

A wide range of dosing needles

Optimal heat distribution through metal thread
needle

background image

[

7

]

[

6

]

MATERIALS

1-COMPONENT MATERIALS

The viscous fluids are cross-linked and give the compo-
nent the properties that they need for production.

2-COMPONENT MATERIALS

A selection of possible materials:

CURING METHODS

UV, humidity, heat and a combination of these.

UV adhesives

Epoxy resins

Acrylate

Silicone

Epoxy resins

Acrylate

Silicone

Polyurethane

Polyester resins

A selection of possible materials:

Grease

Inks

Waxes

Ceramics

Bio-technichal suspensions

Abrasive pastes

AN EXAMPLE OF POSSIBLE APPLICATIONS

GENERAL INDUSTRY

Use of individual solutions in rapidly changing ambient
conditions

Mechanical material properties increase the component
strength of relevant components

Creation of prototypes and small series of complex elec-
tronic components

Targeted weight reduction of components reduces
energy and resources

Personalized medical products provide a targeted
treatment process

A variety of viscous fluids and pastes providing a com-
petitive edge

Attachments for robot grippers

Sealing lip

Ultrasonic transducers

Electromagnets

Ventilation units

Printing of textiles

AUTOMOTIVE

ELECTRONICS

AEROSPACE

MEDICAL TECHNOLOGY

RESEARCH & DEVELOPMENT

Game-Changer:

Example:

Game-Changer:

Example:

Game-Changer:

Example:

Game-Changer:

Example:

Game-Changer:

Example:

Game-Changer:

Example:

background image

VISCOTEC PUMPEN- U. DOSIERTECHNIK GMBH

Address:

Amperstraße 13

84513 Töging a. Inn

Tel.:

+49 8631 9274-0

E-Mail:

mail@viscotec.de

Web: www.viscotec.de

VISCOTEC AMERICA INC.

Tel.:

+1-770-422-4281

E-Mail:

sales@viscotec-america.com

Web: www.viscotec-america.com

VISCOTEC ASIA PTE LTD

Tel.:

+65-656-93-629

E-Mail:

sales@viscotec-asia.com

Web: www.viscotec-asia.com

VISCOTEC GREATER CHINA

Tel.:

+86 21 3133 8773

E-Mail:

sales@viscotec-china.com

Web: www.viscotec.com.cn

VISCOTEC INDIA PVT. LTD.

Tel.:

+91 20 4104 7135

E-Mail:

sales@viscotec-india.com

Web: www.viscotec-india.com

All data is supplied without
liability | EN 10/17

FOLLOW US