ACS-CONTROL-SYSTEM GmbH Digital display unit DPA, Überblick



Beschreibung

You can find information about the digital display unit DPA ACS-CONTROL-SYSTEM GmbH


background image

Specials

Order code .  .  .  .  .  .  .  .  .

page |04|

Description

Visualization

ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57| 84307 Eggenfelden | +49 (0)8721 / 9668-0  | www.acs-controlsystem.de | info@acs-controlsystem.de

| 1 |

Easy and clear display and analysis,

for display, processing, implementation and galvanic

separation of electric standard signals - even from hazardous areas

The digital display unit DPA is

designed for front panel mounting

or on-site assembly or for mounting

on a standard DIN rail. The electrical

standard signal in the range of 0-10V

or 0 to 20 mA is detected by the

evaluatio , adjusted in accordance

with the programmed settings and is

transmitted and electrically isolated

on the output signal 0 .. 10V or

0/4...20mA. Due to the possible entry

of 40 breakpoints also non-linear input

signals, eg of horizontal cylindrical

tanks can be linearized for further

processing. Up to 4 programmable

relay switching points can be assigned

to the input signal.

The modern transmitter has extensive

diagnostic functions for system

analysis and still allows easy setup

and operation through the clear

navigation. The digital process meter

DPA is also suitable for the detection

and measurement of flow rates and

currents. The mathematical formulas

for this are already stored in the

device.

The TFT color display provides an

excellent representation of the

measured values and easy readability.

Intelligent Data management is made

possible with the digital display unit

DPA by the Bluetooth interface and

a built-in data logger function with a

time stamp to record up to 500,000

readings.

0/4...20mA

0...10V

4x relay

4x

0/4...20mA

0...10V

bluetooth

data

logger

color display

galvanic

isolation

Digital

display unit DPA

TFT display

Analog output (0) 4-20 mA and 4 switching outputs

Accuracy of ≤ 0,2%

For hazardous areas

Simple commissioning thanks to

intuitive user guidance

Large display - values   of long distance readable

Data logger function

for recording of measured values

Excellent display of measured values

Clear text operator guidance

Your benefits

Application

Front panel housing

Field case

NEW

background image

Technical data

| 2 |

ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57| 84307 Eggenfelden | +49 (0)8721 / 9668-0  | www.acs-controlsystem.de | info@acs-controlsystem.de

Technical data

Supply voltage:

Type A / B / D: 18..36V DC, reverse polarity protected

Type S / T / U: 186..253V

AC

Power consumption:

Type A/B/D:

≤ 5 W

Type S/T/U:

≤ 20 VA

Isolation voltage:

Type A/B/D:

Auxiliary power 1kV AC; Relay outputs 3kV AC;

Input analogue/digital – output analogue 500V DC

Type S/T/U:

Auxiliary power 3kV AC; Relay outputs 3kV AC;

Input analogue/digital – output analogue 500V DC

Input Signal I – InA1:

Signal 0…20mA: 0mA ... 21mA, max. 30mA

Signal 4…20mA: 3,9mA ... 21mA, max. 30mA

Input Signal U – InA1:

Signal 0…10V: 0 ... 10,5V, max. 15V (UIn max ≤ 30V)

Digital input – InD1…4 (IEC 61131-2):

Signal low – logic 0: -3 ... 5V

Signal high – logic 1: -12 ... 30V (UIn max ≤ 36V)

Transmitter supply:

0…28mA, max. ≤ 35mA, current limited/short circuit proof

Output Signal I – OutA1:

Signal 0…20mA: 0mA ... 20,5mA/22mA

Signal 4…20mA: 3,6/3,8mA ... 20,5mA/22mA

Output Signal U – OutA1

Signal 0…10V: 0 ... 10,5V, max. 11V

Switching output

Function:

Potential-free changeover contact

Maximum switching power AC:

253VAC – 6A – 1500VA (ohmic load) / 300VA (cos φ ≥ 0,7)

Maximum switching power DC:

30VDC – 6A – 180W

110VDC – 0,2A – 22W

220VDC – 0,12A – 26,4W

Response time tOn/Off:

≤ 20ms (td = 0s)

Bluetooth interface

Version:

Bluetooth 2.1 + EDR

Class:

2

Range:

≤ 10m

Measurement accuracy

Characteristic deviation:

Input U/I – InA1: ≤ ±0,05% FS

Output U/I – OutA1: ≤ ±0,05% FS

Temperature deviation:

Input U/I – InA1: ≤ ±0,1% FS / 10K

Output U/I – OutA1: ≤ ±0,1% FS / 10K

Materials

DIN rail housing:

PC / PES / CrNi-steel / PA / CR-NBR

Wall-mount housing:

PC / PES / CrNi-steel / PA / CR-NBR

Front panel housing:

PPE / PES / steel zinc-coated / CrNi-steel / PA / NBR-EPDM

Environmental conditions

Ambient temperature:

-20 ° C. .. +50 ° C

Expansion

Backlight LCD ≤ 85% >> -20°C...+60°C

Protection wall mounting housing /

DIN rail housing:

IP65   EN/IEC 60529

Protection front panel housing:

front IP54  EN/IEC 60529

rear IP20  EN/IEC 60529

Electronic extras type 2 – increased protection class front panel enclosure

Front side IP65 (EN/IEC 60529)

ATEX:

ATEX II (1) G [Ex ia Ga] IIC resp. ATEX II (1) D [Ex ia Da] IIIC

background image

Dimension drawings

ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57| 84307 Eggenfelden | +49 (0)8721 / 9668-0  | www.acs-controlsystem.de | info@acs-controlsystem.de

| 3 |

Digital

display unit DPA

DIN rail housing
Type F

Connection housing
Wall mounted housing
Type P - Elektronik Typ S / T / U

Front panel enclosure
Type M

background image

| 4 |

ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57| 84307 Eggenfelden | +49 (0)8721 / 9668-0  | www.acs-controlsystem.de | info@acs-controlsystem.de

Order Code

Stand 12/2015

DPA

Order code

Electronic – input

1

1x 0/4…20mA - 0…10V, transmitter power supply

Approval

0

Standard

X

ATEX II (1) G / ATEX II (1) D

Enclosure type

F

Field enclosure

M

Front panel enclosure

P

DIN-rail enclosure

Electronic – supply / output

A

18…36V DC / 1x 0/4…20mA - 0…10V

B

18…36V DC / 1x 0/4…20mA - 0…10V, 2x relay, 2x digital input

D

18…36V DC / 1x 0/4…20mA - 0…10V, 4x relay, 4x digital input

S

186…253V AC / 1x 0/4…20mA - 0…10V

T

186…253V AC / 1x 0/4…20mA - 0…10V, 2x relay, 2x digital input

U

186…253V AC / 1x 0/4…20mA - 0…10V, 4x relay, 4x digital input

Electronic - function

0

USB-Interface

1

USB+Bluetooth-Interface

2

USB-Interface / Data logger with time stamp, battery powered

3

USB+Bluetooth-Interface / Data logger with time stamp, battery powered

Y

others

Electronic - extras

0

Standard

1

USB device jack – Enclosure type F / P

2

Increased protection class IP65 – Enclosure type M

S

Standard

S

1

Article name

Description

611000312

USB socket for panel mounting, for mounting the USB connector in the

switching cabinet door, incl. Cap IP68

911000482

USB 2.0 adapter socket A to Micro-B plug

Equipment