Brochure UFM Line5, Überblick



Beschreibung
measuring, testing, bending, assembly presses, stamping, forming, press-fitting, electro mechanical assembly presses, joining

background image

For more efficiency.

UFM Line5

PROMESS assembly presses for assembly and joining applications with force-distance monitoring

background image

Gerhard Lechler founded the company
PROMESS in 1977 as an engineering of-
fice in the field of technical measurement
in Berlin. Initially, the company distributed
handmade patented measuring bearings
for tool condition monitoring before the
electro-mechanical assembly press (UFM)
with integrated NC control was born at the
end of the 1980s. Right from the begin-
ning it was the strength and the passion

From process development to pre-
liminary testing, from initial installation
to daily production, PROMESS offers
holistic expertise from a single source.
Our specialist teams have comprehen-
sive knowledge of our products and
offer prompt and effective advice world-
wide.
Today PROMESS is one of the global
leaders in the manufacturing of elec-

of Gerhard Lechler to develop technical
solutions for his customers. And this has
not changed until today. This passion has
continued so that the core competence
of PROMESS is still the development of
complete technological systems for sol-
ving the individual and complex assem-
bly and testing tasks and requirements of
our customers.

tro-mechanical assembly presses with
the widest range of presses in this field.
Currently, more than 15,000 presses are
operating in heavy industrial applica-
tions.

In almost 30 countries all over the world
our sales and service partners are
looking forward to your enquiries and
questions.

Your partner in the field of assembly and testing technology

Austria
Argentina
Belgium
Brazil
Canada
China
Czech Republic
Denmark
France
Germany
Great Britain
Hungary
India
Italy
Korea

Malaysia
Mexico
Netherlands
Norway
Poland
Romania
Singapore
Slovakia
South Africa
Spain
Sweden
Switzerland
Thailand
Turkey
USA

PROMESS UFM Line5    3

2 PROMESS UFM Line5

background image

UFM Line5

The UFM Line5 range includes
standard press designs with an optimum
price/performance ratio. They are well
suited for assembly and joining applications
with force-distance monitoring and can be
integrated in automated assembly lines,
test stations or manual workstations.

Overview of Press Types

Advantages

n

Standard model includes absolute encoders that

eliminate the need for referencing

n

Only the power amp is required, no need for an

additional external monitoring system

n

Multi measurement with 24-bit resolution

n

Multi range calibration for force input (optional)

n

Sensor system can be easily extended using

versatile PROMESS-BUS

n

Field busses can be optionally expanded using

plug-in modules

n

Utilization of window and envelope technologies

n

No PLC knowledge required

n

Movement and monitoring as an integrated solution

n

Slim internal micrometer

n

Automatic grease unit optionally available

n

Integrated program memory

n

PLe for STO by default

TyPE

fORcE

STROkE

SPEEd

Type 1

10 kN

350 mm

300 mm/s

Type 2

30 kN

350 mm

250 mm/s

Type 3

60 kN

350 mm

250 mm/s

Type 4

100 kN

350 mm

200 mm/s

Type 5

200 kN

350 mm

100 mm/s

PROMESS UFM Line5    5

4 PROMESS UFM Line5

PROMESS UFM Line5    5

4 PROMESS UFM Line5

background image

Mechanics

The Line5 universal joining module
is robustly designed thus making it
well suited for heavy duty cycles.
The mechanical system consists of
the following components:

AC servo motor with integrated
absolute encoder, precision gearbox
(except type 1), integrated force
transducer, robust steel enclosure,
screw assembly, non-rotating press
ram

The units use an inline design, i.e.,
the shaft is driven by a motor spindle
in line with the shaft. The excellent
rotational characteristics of this sys-

System Design

The mechanical system is controlled by
a power amplifier with an integrated NC
module. The internal RISC processor
coordinates the joining module and can
be easily programmed and operated
using a conventional PC/display.

The controller coordinates the
mechanical motion of the press as well
as monitoring the force and distance.
The force-distance characteristic can
be monitored using envelopes and/
or window methods. The data can be
edited numerically and graphically so

tem provide excellent dynamic response.
However for compact installation spaces,
we recommend joining the modules using
an angled motor spindle.
The integrated absolute encode
ensures precise positioning and
eliminates the need for referencing
at the start of a cycle.

that each individual process can be
easily monitored. The automatic learning
function allows customers to eliminate
the need for custom programming and
simply learn the processing limits using
a good part. Quality assurance data is
stored using the database plugin and
can be re-used at any time.

The system utilizes a digital preamplifier,
PROMESS digital module PDM-S. This
transfers the force signal at a resolution

Design basis for all
mechanical parts:
f

Nominal

= 2.5 x C

Dyn

This guarantees an
extremely long life cycle
(min. 12 million strokes on
average for standard
assembly processes)

Set-up of the mechanics

1.  Servo motor with absolute encoder

2.  Gearbox

3.  Integrated strain-gauge force transducer

4.  Steel housing

5.  Mounting flange

6.  Non-rotating press ram

1

2

3

4

5

6

Basic version

Power cable

Field bus

SPS

Ethernet

PROMESS-BUS

UFM Line5

PDM-S

Position encoder (optional)

Server/Network

Standard or

Industrial-PC
- Visualization

- Database

- Program Memory

Power amplifier

PROMESS UFM Line5    7

6 PROMESS UFM Line5

background image

Extension/Options

Line configuration

of 24-bit almost trouble-free. When the
characteristics are calibrated, the joining
system achieves a system accuracy of
0.3 % from the final value. The characte-
ristic calibration process is comparable
to a multispan calibration for 10 spans.
The characteristic map is created
automatically using the UFMR Calibrate
plugin. The results are stored in a cali-
bration report and can be printed out.

The PROMESS Digital Module PDM-S
contains an input for connecting a force
transducer (strain gauge) as well as
an encoder input for connecting digital
sensors. The PDM-S is digitally connec-
ted to the UFM control via the PROMESS
BUS.

Standard or

Industrial-PC
- Visualization

- Database

- Program Memory

Power cable

Field bus

PLC

Ethernet

PROMESS-BUS

UFM Line5

Ext.

Force Transducer

PDM-S

PDM-S

Server/Network

Can be expanded as

desired

PDM-IO  16 Inputs/Outputs

PDM-A    4 Analogue inputs

PDM-P    Force (Piezo) + Distance

PDM-S    Force (DMS) + Distance

Field bus

PLC

Ethernet

UFM Line5

Server/Network

Standard or Industrial-PC

Power amplifier

PDM-S

PROMESS-BUS

Power amplifier

PROMESS UFM Line5    9

8 PROMESS UFM Line5

background image

Highlights for

demanding

applications:

n

Positioning on force slope:

Joining components until a
definite slope (increasing force)
or relatively once a knee-point
has been detected.

n

Controller module:

This module allows you to

easily solve processes by
controlling the process
variables and maintaining
constant signals, e.g., spinning
operations with constant force
controlling.

n

Measurement data system:

Measurement data can be

captured relative to positions
and force, but also relative to
freely definable reference points
(e.g., relative to achieving a
specific threshold).

n

Bending compensation:

Not only customizable for
separate systems, also for
specific processes and
components.

Main window

Entry screen Move

Entry screen Press to Signal

Entry screen Tare

Software

As standard, the UFM Line5 range of
presses come with the UFM V5.xx
programming software. This software
is intuitive to operate and does not
require any PLC expertise. It can be
used to create simple or advanced
joining processes.

The integrated User Administration
feature offers multiple permission levels
and logging for process safety. The
log documents who makes which
changes to the program. Each user
profile can be exported and then
imported to another station. Thus it is
possible to integrate a user administ-
ration system and also to connect the
system to a higher-level permission
system using the .Net interface or field
bus (e.g., Euchner EKS system).

The transparent and concise program
surface allows users to quickly create
programs. The main window lists all
programming steps together with their
functions. The function screens can
be opened successively to enter the
process values. Thus the force, displa-
cement, time, speed, acceleration and
braking rate can be easily programmed
for each step. Once the required input
screens have been defined, the joining
program is completed and the steps
are processed automatically.

PROMESS UFM Line5    11

10 PROMESS UFM Line5

background image

Modern Database Structure

All process data including the curves
can be stored in a database.
All common database formats such as
Oracle, MS SQL and Access are sup-
ported. A separate database is created
for each station. Programs can be
stored and re-used at any time.
Since the program changes can be
traced, this provides 100% traceability
throughout the entire production.
The database can be analyzed using
the DB Viewer with its extensive
querying and filtering options. Graphs
can be superimposed on each other for
comparisons and analyses. Envelopes
can be edited and reloaded into the

Trigger Technology by PROMESS

The triggers are “pulse points”. Up to seven trigger points can
be defined in order to react to processing events during movement.
These reactions can include:

n

Smooth speeds

n

Set the outputs in real time

n

Change target parameters during movement

n

Correct process tolerances during movement

DB Viewer

Software Highlights:

n

Press to signal, press to force, press to an external signal

(e.g., analogue or TTL signals)

n

Force and speed can be programmed individually during the

joining process

n

Variables can be used to transmit setpoints, perform calculations

using PLC and generate counters

n

100 % quality control using window and/or envelope methods

n

100 % process documentation using modern database structure

n

100 % process analysis using standardized interface to QS-STAT

(optional), alternative to process data management software IPM
(optional) – can be expanded using .net interface

n

Trigger function for demanding applications

n

High controller accuracy (minimization of overshoot in control processes)

n

Display of two graphs in one diagram

n

Quick printout of a graph report (screenshot)

Scope of Delivery for Components:

n

Universal joining module Line5

n

Power amplifier incl. application module and UFM V5 firmware

n

Brake resistance

n

Ethernet module

n

Digital preamplifier PDM-S

n

Cable, field bus and more accessories on demand

press. The data can also be exported in
Excel format at any time.
The standard models include the data-
base software package and DB viewer.

ONLY WITH

US

PROMESS UFM Line5    13

12 PROMESS UFM Line5

background image

PSB010G1

UFM Line5

10 kN

30 kN

60 kN

100 kN

Item no.

PSB010G1

PSB030G1

PSB060G1

PSB100G1

Connection voltage

3 AC 380 V - 480 V, +/- 10 %, 48-65 Hz

Connected load at 400 V

8,7 kVA

10 kVA

18,3 kVA

19,0 kVA

Protection class

IP 54

Weight

17 kg

18 kg

28 kg

28 kg

Recommended protection

IEC 20 A class gG

IEC 40 A class gG

Temperature range

0° C … +40° C

Power loss

368 W

493 W

654 W

756 W

PC Interface

Ethernet

Option PLC fieldbus interface

Profibus, Profinet, EtherCAT (add. on request)

Technical Data

PROMESS has developed extensive accessories for
the UFM Line5 range of presses that provide them
with additional functionality. Together with our many
years of expertise, we provide you with complete
technologies for solving your own complex assembly
and testing tasks.

Accessories/Options

As an option to our assembly presses
UFM Line5 we offer our PROMESS
Safety Box PSB as an alternative to the
integration in electrical cabinets. The
device features all safety and power
components for this purpose.

It can easily and quickly be connec-
ted by plug & play. All cables are
pluggable. Due to the compact
design, the PSB can be mounted next
to the assembly press so that cable
lengths can be reduced and wiring
becomes unnecessary. By using the
PSB your assembly press will be ready
for production instantly.

Safety Box PSB

Advantages

n

No integration in electrical

cabinets

n

Reduction of cable lengths

n

No wiring work

n

No adaption of electrical

diagrams

n

Short connection time:

plug & play

n

PLe for STO by default

n

Extention on SLS, SS1,

SS2 possible

n

IP Code 54

n

Extremely compact design

Safety Box PSB

PROMESS UFM Line5    15

14 PROMESS UFM Line5

background image

System Design

Technical Data

System Design

The PSD safety module is delivered
tested and ready to install.
It contains the power electronics and
safety controller for the joining unit. It
offers the following safety functionality:
STO in PLe in accordance with DIN ISO
13849-1; optional: SSx and SLS in PLd
in accordance with DIN ISO 13849-1
(for UFM Line5 with safety brake).
The safety module eases and
accelerates the installation procedure
for the joining unit.

The PSD is suitable for our UFM Line5
units with and without brakes. As a
prerequisite, it must be controlled using
field bus.

Connected Components

n

AC servo amp with NC module

n

Brake resistance

n

EMC components, main power filter

n

Safety controller: Safety functionality

n

STO in PLe in accordance with

DIN ISO 13849-1; optional: SSx and
SLS in PLd in accordance with

DIN ISO 13849-1 (for UFM Line5

with safety brake)

n

Field bus interface (must be

ordered separately)

n

Set of cables (must be ordered

separately)

n

Required connectors (connected

to pins): Power supply

n

24-volt emergency stop circuit

Advantages

n

Short installation times

n

No wiring necessary

n

Completely  inspected

and tested

n

EMC tested

PSD 010G1

Power cable

Field bus

Standard or

Industrial-PC
- Visualization

- Database

- Program Memory

Ethernet

PROMESS-BUS

UFM Line5

PDM-S

PSD Safety Module

Position encoder (optional)

UFM Line5 Item no.

WxHxD

(mm)

Supply -

voltage

Frequency

Operating

temperature

range

Control

voltage

10 kN

PSD010G1 354x475x300

380-480 VAC

+/-10%, 3 ph

50-60 Hz

+5-40 °C

24 VDC

+/-10%

30 kN

PSD030G1 500x500x300

60 kN

PSD060G1 500x500x350

100 kN

PSD100G1 500x500x350

200 kN

PSD200G1 500x500x350

PLC

PSD

PROMESS UFM Line5    17

16 PROMESS UFM Line5

background image

Item no.

UFM Line5

Item no.

10 kN

850104LN

30 kN

850304LN

60 kN

850604LN

100 kN

850604LN

200 kN

852004LN

Item no.

UFM Line5

Item no.

10 kN

850106LN

30 kN

850305LN

60 kN

851602LN

100 kN

851602LN

200 kN

852005LN

Four-Column Frame

Four-column frames are suitable
for applications with central axial
application of force. They offer low
bending that is solely parallel.

By default, the lower plates are
equipped with a center hole and
2-T grooves as optimum tool
mounts. The upper plates are
pre-fabricated to hold a specific
joining module.

Four-Column Frame

Frames

PROMESS offers matching C- and
four-column frames for each type
of press in the UFM Line5 range.

C-Frames

The robust C-frames are easily
accessible from the front and sides
and provide high stiffness. The max.
bending is 0.2 mm under nominal
load. They are mainly suitable for
use in assembly lines or machines.

By default, the lower plates are
equipped with a center hole and 2-T
grooves as optimum tool mounts.
The upper plates are pre-fabricated
to hold a specific joining module.

C-Frame

PROMESS UFM Line5    19

18 PROMESS UFM Line5

background image

Article no.

Capteur / Accessoires

Câble  Course

Résolution

3647

Capteur précision

ST 1278

axial

12 mm, extension neutre

+/- 0.001 mm

3640

Capteur précision

ST 1278

radial

12 mm, extension neutre

+/- 0.001 mm

4103003080

Capteur précision

ST 1277

axial

12 mm, rétraction

pneumatique

+/- 0.001 mm

4103003078

Capteur précision

ST 3078

axial

30 mm, extension neutre

+/- 0.001 mm

Item no.

Art.-Nr.

Technical Data

UFM Line5

Item no.

10 kN

850103LN

30 kN

850303LN

60 kN

851601LN

100 kN

851601LN

200 kN

852003LN

Item no.

Connecting cables have to be ordered separately.

UFM Line5

Item no.

10 kN

850102LN

30 kN

850301LN

60 kN

850603LN

100 kN

851001LN

200 kN

852001LN

UFM Line5

Item no.

10 kN

850002LN

30 kN

850005LN

60 kN

850003LN

100 kN

850003LN

200 kN

852002LN

External Force
Transducer

The force transducers in the Line5
range are designed to measure tension
and compression forces both statically
and dynamically. They offer high
measurement precision and a low
installation height.

Sensors (Displacement Transducers)

The PROMESS NC controller allows you to connect various additional sensors
for measuring force, distance, temperature or other variables.

Cable Track
Module

PROMESS offers different modules
for towing the force transducer cable
safely without wear and tear.

External Force Transducer

Flange Plate

PROMESS offers corresponding
flange plates for fastening the joining
modules.

Flange Plate

Item no.

Sensor / Accessory

Cable

Stroke

Resolution

3647

Precision sensor ST 1278 axial

12 mm, neutral position

extended

+/- 0.001 mm

3640

Precision sensor ST 1278 radial

12 mm, neutral position

extended

+/- 0.001 mm

4103003080

Precision sensor ST 1277 axial

12 mm, pneumatic

retracted

+/- 0.001 mm

4103003078

Precision sensor ST 3078 axial

30 mm, neutral position

extended

+/- 0.001 mm

PROMESS UFM Line5    21

20 PROMESS UFM Line5

20 PROMESS UFM Line5

background image

Display
PROMESS offers different displays
on request.

Additional field busses on request.

UFM Line5

Item no.

10 kN

750100LNM

30 kN

750300LNM

60 kN

750600LNM

100 kN

751000LNM

200 kN

752000LNM

UFM Line5

Item no.

10 kN

750105LNM*

30 kN

750305LNM*

60 kN

750605LNM*

100 kN

751005LNM*

200 kN

752005LNM*

UFM Line5

Item no.

Profibus

3302005550

Profinet

3302005585

EtherCAT

3302005595

Connector Sets

If a cable set is not ordered,
a connector set will be required.

Cable Sets

The cable sets are available
in lengths of 5*, 10, 15 and 20 m.

Field Busses

PROMESS offers various field busses
for communicating between the PLC
and NC controller of the press.

Display and PC

As a programming unit for editing NC programs and for visualizing signals,
PROMESS offers an industrial PC and different displays.

Industrie PC
Item no. 2601002060

n

Industrial PC for installation in

control cabinets – multilingual

n

Compact enclosure made of sheet

steel, W*H*D = 140*230*257mm

n

Interfaces: 2 x Ethernet RJ45,

1 x RS232, 1 x RS-232/422/485
Serial, 2 x PS/2 for keyboard and
mouse, 2 x USB, 1xIrDA,

n

Hard drive 100GB IDE 2,5“ HDD,

24h7d

n

Windows Win7 ultimate MUI

PROMESS UFM Line5    23

22 PROMESS UFM Line5

background image

URMR XML-Writer

Plugin

PROMESS offers a range of custom
plugins for its powerful UFM V5.xx
programming software. These can be
connected to the software through the
.net interface. This allows the software
to be modified on a case-by-case basis
and optimized for specific applications
without having to update or change the
firmware. The expanded database is
also linked to the plugin.

Excerpt from the plugin library:

n

UFMR Calibrate

The UFMR Calibrate plugin was de-
veloped for calibrating force
transducers in the joining modules.
The integrated range calibration of
the PROMESS PDM-S digital preamp
supports 2-point calibration as well as
characteristic diagram calibration.

Calibration can be performed most
simply using the PROMESS calibra-
tion set that contains a reference force
transducer and the KT-V5 evaluation
unit with display.

The KT-V5 is connected to the USB
port of the computer and operated
using the UFM in order to read in the
values of the reference force. The
characteristics of the reference force
transducer are automatically detected
by the integrated TED5 and written to a
calibration log that can be exported in
Excel format.

However, the calibration can also be
performed using external calibration
equipment. In this case, the base point
values of the reference transducer are
entered manually.

n

UFMR Barcode

The UFMR Barcode plugin can be used
to change the program within the UFM
software using a barcode scanner. While
the program runs, the barcode scanner
can be used, for instance, to transfer a
Part ID using the UFM dialog function.

n

UFMR QDE

The UFMR QDE plugin
allows quality assurance
data to be exported to the QS-STAT
statistics software from Q-DAS
and supports process monitoring
and optimization. Measurement,
auxiliary and description data can
be exported from each joining
program as characteristic data.

n

UFMR IPM

The UFMR IPM plugin
makes it possible to
export process and measurement data
to the IPM process data management
from CSP and thus supports process
monitoring and optimization.

Calibration plugin

n

URMR XML-Writer

PROMESS developed the XML
Writer plugin for exporting process,
measurement and graph data as well
as other variables. The XML files can
be subjected to further processing and
analyses.

URMR XML-Writer

Calibration protocol

PROMESS UFM Line5    25

24 PROMESS UFM Line5

background image

Calibration Set

1 kN

5 kN

10 kN

20 kN

50 kN

100 kN

200 kN

Item no.

5106

5107

5104

5101

5103

5105

5108

Force transducer

KAM/1kN/0,2 KAM/5kN/0,2

KAM/10kN/0,2 KAM/20kN/0,2 KAM/50kN/0,2

KAM/100kN/0,2 KAM/200kN/0,2

Base plate

XKM 096

XKM 096

XKM 096

XKM 094

XKM 094

Without

Without

Diameter/height

Ø40 / 12

Ø40 / 12

Ø40 / 12

Ø90 / 25

Ø90 / 25

Ø90 / 25

Ø90 / 25

Plug

XKC 041

XKC 041

XKC 041

XKC 041

XKC 041

XKC 041

XKC 041

Display

KT-V5

KT-V5

KT-V5

KT-V5

KT-V5

KT-V5

KT-V5

Factory calibration XKW 221

XKW 221

XKW 221

XKW 221

XKW 221

XKW 221

XKW 221

Our maintenance contract contains:

n

1 x annual maintenance checkup including following services:

– Re-greasing of all lubricated areas

– Transmission oil change when necessary
– Inspection of mechanical and safety-relevant parts
– Replacement of worn parts when necessary
– Software update
–  Creation of machine status report and offer to eliminating

any deficiencies or faults

– Calibration of force transducer
– Adjustment work
– Issuing of calibration certification

n

12-month extension to guarantee following maintenance

n

Express delivery with no additional charges

n

10% discount on single parts

n

10% discount on additional services and training

Calibration &
Maintenance

Avoid expensive repairs
Preventative maintenance is
the simplest means of reducing
costly standstills in production,
increasing machine life and
boosting productivity. Our services
offer flexible maintenance for your
plant with minimum downtime.


Calibration Set

Easily perform a quick calibration or
test of the UFM joining unit in your
machine using the PROMESS
calibration set.

The process can be automated using
the optionally available software.

On completion, a log file is created
that can be exported to Microsoft
Excel.

PROMESS Calibration Sets consist of:

n

Reference transducer

n

Evaluation unit for the reference transducer with

display and USB port for connecting to a PC

n

Factory calibration log

(or DKD calibration by request)

n

PROMESS Software UFMR Calibrate (optional)

n

Suitcase

Special Features:

n

Simple operation

n

Robust battery-driven display

n

Industrial strength suitcase

n

Nominal forces from 500 N to 200 kN

n

With factory calibration certificates

Calibration plugin

PROMESS UFM Line5    27

26 PROMESS UFM Line5

background image

CUSTOMER SERVICE

Our Service Competence

PROMESS universal joining modules have been used for many years in
heavy industrial applications. This is made possible through the solid quality
of the products as well as our extensive, sustainable worldwide service.
From process development to preliminary testing, from initial installation
to daily production, PROMESS offers holistic product expertise from
a single source and thus provides sustainably
rapid service and competent consulting.

Training

PROMESS has developed
various training modules
to simplify, as much as
possible, the installation,
operation, maintenance and
handling of our joining
modules. The modules are based on core knowledge for introducing NC joining
technologies that, after consultation, can be individually modified or adapted.
Training can be held on site or at our premises and are performed by
experienced and qualified training personnel.


Express Delivery

On request and for an additional charge, we can deliver within two weeks by
express delivery for up to five units.

Our services include:

n

Process development

n

Preliminary testing

n

Rental units

n

Installation

n

Extensive documentation

n

Training

n

Local and remote maintenance

n

Calibration services

n

Emergency repairs and spare part delivery

n

Consignment warehouse

n

Worldwide distribution and service network

Range of Services

PROMESS UFM Line5    29

28 PROMESS UFM Line5

background image

F1

F2

L1

L2

Application Examples

Precision Joining

n

Precision joining < 0.002 mm,
collision-free due to electronic
bending compensation.

Riveting

n

Rivet press with programmable press
force and control of power press.

Join on Contact

n

Joining on contact with
precise shutdown once
absolute shoulder position
has been reached.

Stamping/Forming

n

Stamping and forming with
detection of part height
and relative
forming.

Surface Checks

n

Logging of force-distance data for
multiple switch points.

Press-fitting

n

Press-fitting with
controlled force for
relative displacement.

Testing/Measuring

n

Logging  of  force-
distance data for multiple
positions.

Bending

n

Monitored bending of straps,
brackets etc. on
safety components.

Clipping

n

Joining of plastic and
medtech parts with
monitoring of snapping
force.

Calibrating

n

Calibration with quality assurance
through monitored force.

Position s

Force f [kN]

Position s

Force f [kN]

Position s

Force f [kN]

Position s

Force f [kN]

Position s

Force f [kN]

Force f [kN]

Position s

Force f [kN]

Position s

Position s

Force f [kN]

Position s

Force f [kN]

Position s

Force f [kN]

Adaptive window

PROMESS UFM Line5    31

30 PROMESS UFM Line5

background image

PROMESS. For more efficiency.

www.promessmontage.de

PROMESS
Gesellschaft für Montage-
und Prüfsysteme mbH

Nunsdorfer Ring 29 | D-12277 Berlin
Phone  +49 (0)30 / 62 88 72 - 0
Fax

+49 (0)30 / 62 88 72 - 59

promess@promessmontage.de