Marking and cleaning tools, Überblick



Beschreibung
amf fellbach, amf andreas maier, amf-writer, amf-cleaner, amf-marker, hand tools, customer solutions, clamping technology, system provider, automation technology, industry solutions, individual project fabrications, amf-cleaner stick, clean-case, amf-cleaner ball

background image

Marking and cleaning tools

CATALOGUE 2017/2018

all sales are subject to our terms of sale, delivery, and payment. all rights for design, photographs and texts reserved by the publisher, aMF.
no photomechanical reproduction without our express permission. 2017/15en > WB 3.//04/2019 > Printed in germany.

Order no. 515429 ∙ € 2,40

AndrEAs MAiEr GmbH & Co. KG
Waiblinger Straße 116 ∙ D-70734 Fellbach
Phone:  +49 711 5766-0
Fax:

+49 711 575725

E-mail:  amf@amf.de
Web: www.amf.de

Marking and

cleaning tools

CATALOGUE 2017/2018

request additional catalogues from

www.amf.de

„ZEro-Point“
claMPing systeM

Hand tools

Hydraulic claMPing systeMs

Magnetic claMPing
systeMs

Modular Fixture systeMs

VacuuM claMPing systeMs

toggle claMPs

Pallet Feed systeMs

standard claMPing eleMents

griPPers

Marking and
cleaning tools

locks For gates and doors

background image

2

Marking and cleaning tools

andreas Maier gmbH & co. kg ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

andreas Maier gmbH & co. kg ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking and cleaning tools

31

Terms of sale, delivery and Payment

These Terms of Payment apply for companies, legal entities governed by public law

and public law special funds. Our goods and services are supplied exclusively on the

basis of the following conditions. Any deviating purchasing conditions of the customer

not expressly recognised by us will not become part of the contract through acceptance

of the order. By placing the order and accepting the goods we deliver, the customer

confirms its consent to our terms and conditions.
1. Offer and contractual conclusion
All our offers are always subject to change without notice unless otherwise explicitly

agreed. Our delivery contracts are based on the latest version of our catalogue.

Dimension and weight values, as well as illustrations, drawings and data, are non-

binding and can be changed by us at any time. Therefore, deviations cannot be ruled

out and do not justify any compensation claims against us.

Orders  are  considered  accepted  only  when  confirmed  by  us  in  writing.  If,  for

organisational reasons, the customer does not receive a separate confirmation upon

the delivery of goods, the invoice shall also be deemed the order confirmation.
2. Prices
The prices are in EURO, ex-works, excluding VAT, packing, freight, postage and

insurance. Unless otherwise agreed, our list prices valid on the day of delivery

shall apply. For orders below 50 EUR goods net, we must make a minimum quantity

surcharge of a 10 EURO for cost reasons.
3. Tool costs
Unless any other agreements have been reached, the tools fabricated for the purpose

of executing the order shall remain our property in all cases, even if we have invoiced a

tool cost component separately.
4. Payment
Unless otherwise stated on the invoice, the purchase price falls due for net payment

within 30 days of the invoice date (without deduction of discount). Invoice amounts of

below 50 EURO are due for payment immediately.

In case of payment default, we shall be entitled to charge default interest. The amount

corresponds to our interest rate for current account credits at our main bank; the

minimum however being 8 percentage points above the relevant base interest rate

applied by the European Central Bank. Moreover, in case of default following written

notice  to  the  customer,  we  shall  be  entitled  to  cease  to  fulfil  our  obligations  until

payments are received.
5. No set-off
The customer can set-off only with legally confirmed or undisputed counterclaims.
6. Right of withdrawal in case of delayed acceptance or payment and insolvency
If  the  customer  fails  to  accept  the  goods  in  due  time,  we  shall  be  entitled  to  set  a

reasonable period of grace, after which we can dispose of the goods elsewhere and

supply the customer on a reasonably longer term. Our rights to withdraw from the

contract under the provisions of Section 326 BGB and demand damages for non-

performance  shall  not  be  affected.  If  the  customer  fails  to  pay  for  the  goods  once

payment is due, we shall be entitled, at the end of a reasonable period of grace we

have set, to withdraw from the contract and demand the return of any goods already

supplied. Section 323 BGB remains unaffected in all other cases.

If the customer applies for the opening of insolvency proceedings, we shall be entitled,

prior to the ordering of security measures by the insolvency court, to withdraw from the

contract and demand the immediate return of the goods.
7.  Customer-specific fabrications/project fabrications (custom fabrications)
Customer-specific  fabrications  require  binding  information  on  design,  quantity  etc.

in written form at the time of ordering. For manufacturing reasons, we reserve the

right to supply up to 10% above or below the order quantity. Technical modifications

or  cancellations  are  subject  to  any  costs  incurred.  The  return  of  customer-specific

fabrications is impossible.
8. Delivery and packaging, transfer of risk
The delivery date is non-binding; although stated to the best of our knowledge. It is

subject to us receiving correct, defect-free and complete deliveries. The stated delivery

dates relate to completion in the factory, starting on the day the order is accepted by us.

Delivery is EXW (ex-works) in accordance with Incoterms 2010. Therefore, the costs

are borne by the customer. The risk is transferred to the customer when the goods are

passed to the person, company or facility nominated to execute the shipment. This

applies also for partial deliveries, or if we have assumed responsibility for delivery and

installation. The risk shall be transferred to the customer even in the case of delayed

acceptance.

In  the  absence  of  specific  shipping  instructions,  we  shall  proceed  as  we  deem  fit

and without any obligation to the cheapest or most expedient method. The customer

agrees that the order can also be delivered in parts, insofar as this is reasonable for the

customer. We shall charge a 5 EURO processing free for shipping to third parties that

we supply on behalf of the customer.

The packaging complies with the packaging ordinance. Disposable packaging shall be

charged at cost price. The packaging cannot be taken back.
9. Performance impediment and/or impossibility
If we are hindered in the fulfilment of our obligation due to the onset of unforeseeable

circumstances, which we are unable to avoid despite reasonable effort in relation to

the nature of the circumstances (e.g. operational interruption, delay in the delivery of

important raw materials, defects in the delivery), the delivery time shall be extended

by a reasonable period, insofar as the supply of goods or services is not rendered

unreasonably difficult or impossible.

If  we  have  to  accept  that  these  circumstances  are  not  only  temporary,  we  shall  be

entitled to withdraw from the contract either in whole or in part.

If  the  supply  of  goods  or  services  becomes  impossible,  the  customer  shall  not  be

obliged to furnish its own contractual service. Section 275 BGB applies mutatis

mutandis.  If,  however,  the  customer  is  solely  or  predominantly  responsible  for  the

circumstances that led to impossibility, it shall remain under an obligation to render

the return service. The same applies if this circumstance occurs at a time when the

customer is behind schedule with acceptance.
10. Samples/returns
Samples shall be provided only against payment. If samples or models are provided,

a credit note shall be issued with the subsequent order if the order value is 125 EURO

net or more. Goods can be returned only by agreement, although custom fabrications

are excluded from such return.

In the case of returns for which we are not responsible (e.g. incorrect order), we shall

charge a processing fee of 10%, the minimum value, however, being 7.50 EURO.
11. Retention of title
The goods shall remain our property unless full payment of all claims and/or until

the cheques provided for this purpose are honoured. The itemisation of claims in an

ongoing invoice, as well as balancing the account and the recognition thereof does

not affect the retention of title. The customer is entitled to sell on the retained goods

during the ordinary course of business. However, the customer is not permitted to

pledge the goods or transfer them by way of security. It shall assign its claim ensuing

from the selling on of the retained goods to us in advance. The customer shall be

entitled to collect the claim to the extent that it has fulfilled its obligations towards us.

At our request, the customer shall be obliged to state third-party debtors and we shall

be entitled to report this and the assignment.
12. Property rights
We reserve property rights and copyrights to all contractual documents such as

drafts, drawings, calculations and cost estimates. Such documents must not be

reproduced or disclosed to third parties without our consent. Any rights to patents,

utility models etc. reside solely with us, insofar as such patents have not yet been

filed. Our products are allowed to be replicated only with our written consent.

If objects are fabricated according to drawings or samples, the customer shall warrant

that any third party property rights are not infringed by manufacture or delivery. If

a third party forbids manufacture and delivery on account of property rights, we

shall be entitled to stop manufacture and delivery immediately. The customer shall

be obliged to reimburse us with all costs incurred and indemnify us from third party

compensation claims. Compensation claims by the customer are impossible.
13. Warranty
If the customer agrees with us a particular quality of the goods, we shall base this

agreement on our technical delivery specifications. If we have to deliver according to

customer drawings, specifications, samples etc., the customer shall assume the risk

for suitability for the intended purpose. If, after the contract is concluded, the scope

of goods or services is changed at the customer‘s request and this impairs the quality

or suitability of the goods, claims for defects on the part of the customer shall be ruled

out, insofar as such impairments are caused by the customer‘s requests for change.

The time at which the risk is transferred is decisive for the contractual state of the

goods. Wear and tear of wearing parts caused by ordinary use does not constitute a

defect. Claims for defects are ruled out in the following cases in particular: Unsuitable

or improper use, incorrect installation and/or commissioning by the customer or third

party, normal wear and tear, incorrect or negligent handling - in particular excessive

use -, unsuitable equipment, replacement materials, chemical, electrochemical or

electrical influences, unless such defects are caused by ourselves.

If  the  goods  contain  a  defects,  we  shall  provide,  following  a  reasonable  period  of

grace set by the customer, either a replacement or a repair as we deem fit. If such

subsequent performance fails, the customer shall be entitled to either reduce the

purchase price or withdraw from the contract. Any further warranty claims are ruled

out. In case of negligible deviations from the agreed quality, no claims for defects

shall be recognised.

The discovery of defects must be communicated to us immediately in writing. In the

case of recognisable defects, however, within 10 days of acceptance, in the case of

non-recognisable defects immediately after they become evident. The warranty is 12

months, starting with delivery of the goods ex-works.
14. Liability
With the exception of harm to life, body or health on account of a breach of duty by

ourselves, our liability shall be limited to intent or gross negligence.
15. Place of fulfilment, place or jurisdiction and governing law
The place of fulfilment for all obligations ensuing from this contractual relationship is

D-70734 Fellbach.

The place of jurisdiction for all legal disputes ensuing from the contractual relationship

is the court responsible for the headquarters of Andreas Maier GmbH & Co. KG.

All disputes ensuing from the contract or regarding the validity thereof shall be finally

decided by a court of arbitration in accordance with the Court of Arbitration Ordinance

of the German Committee for Arbitration Court Procedures or the Conciliation and

Arbitration  Arrangement  of  the  International  Chamber  of  Commerce,  recourse  to

ordinary courts of law being excluded. The legal dunning process, however, remains

permissible.

German law shall govern (BGB and HGB). The applicability of the UN  Convention on

Contracts for the International  Sale of Goods  (CISG) is ruled out.
16. Severability clause
If  individual  provisions  become  legally  invalid,  the  remaining  provisions  shall  not

be affected. The legally invalid provision shall be replaced by regulations that most

closely reflect the economic purpose of the contract with reasonable consideration

for the mutual interests. The publication of these Terms of Sale, Delivery and Payment

renders all previous versions invalid. This does not apply for any contracts concluded

prior to announcement.

Pledges that count in everyday life

For this reason, we have a few principles that we follow by conviction
and which always apply..

individual develoPment
Even if the product you need does not even exist yet, we will find the
right solution with you: from special designs to new developments,
everything is possible.

Warranty
If, despite our high quality standard, there is a complaint, this is dealt
with quickly and unbureaucratically, even beyond the warranty period.

highest quality standards
Careful manufacturing based on tradition since 1890, and naturally
with a modern quality management system according to ISO 9001
for many years.

short delivery time
With over 5,000 articles in our warehouse, you can expect your order to
be dispatched on the same day.

comPetent service from exPerts
Your local retail partner or the specialists in our team will find the right
solution for every task.

made in germany
Our entire product range is developed and manufactured exclusively by
our employees in Germany.

WE GENERATE EXCITEMENT.

since the foundation of the company in 1890 until today the

goal has remained the same: the highest quality in products

and services. nevertheless, the circumstances, tasks and

challenges have changed, of course. By focussing on our core

areas of expertise, we have long set new standards for innovative

clamping technology - driven by our own development, the

greatest possible flexibility and passion for individual solutions.

all this is only possible with committed and contented

employees. respectful interaction with others, personal

development and measures for the wellbeing of each

individual are therefore values that matter to us.

our comPany history

1890   Company founded as a lock manufacturer by Andreas Maier.

1920   Product range extended to include spanners.

1928   Production line assembly of FELLBACH LOCKS.

1951   Introduces clamping elements and diversifies into workpiece

and tool clamping technology.

1965   Toggle clamps extend the AMF product range,

AMF catalogues are now printed in ten languages.

1975   Further specialisation into hydraulic clamping technology.

1982   Clamping and fixture systems round off AMF‘s clamping

expertise.

1996   AMF team organisation in all sectors of the business,

Quality management with certification to ISO 9001.

2001   AMF Service Guarantee for all products.

2004  Introduction of the ZPS zero-point clamping system.

2007  The magnetic clamping technology extends the AMF

product range.

2009  Development and marketing of AMF Vacuum clamping
technology.

2012  LOW-COST AUTOMATION gripping, clamping, marking

and cleaning.

2014  AMF presents the most extensive product range of automation

solution in zero-point clamping technology.

2017  Wireless sensoring systems extend the expertise into Industry 4.0

and blends seamlessly into the AMF product range.

Company Management:
Wolfgang Balle, Johannes Maier (CEO), Jürgen Förster

background image

Subject to technical alterations.

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking and cleaning tools

3

the Most iMportant thing about “aMF Marking tools“

4 - 7

aMF-Marker

8 - 13

aMF-Writer

14 - 19

aMF-cleaner, clean-case

20 - 22

aMF-cleaner, ball and stick design

23 - 26

Contents

For an overview in numerical / alphabetical order, see catalogue page 28

background image

Subject to technical alterations.

4

Marking and cleaning tools

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

AMF MArking tools –
and your machine Will marK economically

The amF-Writers and amF-marker are tools for the
permanent marking of workpieces. They are preferably
clamped in collets and Weldon chucks and mounted in the
machine spindle of a cnc machine.

marking is accomplished through a combination of material
compression and displacement, which we call “drumming“.
That means, the marking is made using a special needle with
multiple refinements and an extremely hard tip.
Thanks to the special design and very high quality guides,

this tool can provide an even and high-quality marking
without height adjustment by the spindle, for smooth and
rough surfaces that can be uneven by between 3 and 9 mm.
The adaptation to different materials, material hardness
and implementation of different marking depths is infinitely
adjustable.

This tool is particularly economical thanks to the low
acquisition costs, long service life and tremendous time
savings.

Your beneFits at a glance:

>

the surface is not weakened or damaged, but is compressed and
thus strengthened

>

high marking speeds are possible

>

high wear resistance and thus long service life

>

also suitable for thin-walled workpieces

>

no burrs appear on the marking line

>

high-quality type face

>

unevenness of the workpiece is compensated for (see Fig. 1)

>

also suitable for marking round surfaces (up to 15°)

>

depending on the design, it is possible to mark surfaces with a
hardness of up to 57 hrc

>

no generation of noise

Fig. 1 uneven workpiece surface

product overvieW aMF-Marker

background image

Subject to technical alterations.

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking and cleaning tools

5

AMF MArking tools –
and The PerFecT needle!

The heart of the amF marking tools and the guarantee for a perfect written type face is the elaborately produced needle.
This permits marking through a combination of material compression and displacement, which we call “drumming“. That
means, the marking is generated by the rounded point, which we also call a “ball“. The optimal radius of these “balls“ varies,
depending on the material to be labelled, the breadth and depth of the lines and print size. Therefore, amF carries several
designs of the needle in order to ensure the best marking results.

The design of the needle is classified by the angle,
radius and eccentricity of the point.
This means that a needle of design 90r10ex01 has
an angle of 90° at the tip of the needle and a radius of
1.0 mm as well as 0.1 mm eccentricity.
a needle of design 90r05ex00 would accordingly
have an angle 90°, a radius of 0.5 mm as well as
0.0 mm eccentricity, i.e. it is a centric needle.

We are happy to assist you in the search for the
optimal needle for your application.

eccentric needle of the new amF-marker

Subject to technical alterations.

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking and cleaning tools

5

background image

Subject to technical alterations.

6

Marking and cleaning tools

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Choosing the MArking tool –
hoW do i Find The riGhT Tool For my aPPlicaTion?

tendentious MAteriAl AlloCAtion oF AMF-MArker:

Choosing the MArking needle –
hoW do i Find The riGhT needle For my aPPlicaTion?

Small letters are compressed on wide lines and become illegible. The minimum legible type size is limited by
the width of the letter lines.
Type size: distance from upper and lower end of the letter.

Minimal lesbare schriftgröße abhängig von der gewählten Markiernadel:

90r03 ex00

1.2 mm

90r10 ex01

5.0 mm

90r05 ex00

2.0 mm

90r10 ex02

6.0 mm

90r10 ex00

4.0 mm

90r10 ex03

7.0 mm

in the case of a smaller radius, the same force affects a smaller surface, i.e. the font becomes deeper.
With eccentric needles you can produce a wider text.

MiniMuM legible type size depending on the MArking needle seleCted:

0

25

50

75

100

125

150

175

200

225

250

275

300

325

350

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

Andr

üc

kk

ra

ft

(N)

be

i e

ine

r Z

us

te

llung

d

er

M

as

ch

ine

ns

pi

nde

l v

on

-1 m

m

Einstellung des Stellrings oder der Stellschraube (in mm)

Kräftediagramm - AMF-Marker

Extra Large
Large
Medium mit verstärkter Feder
Medium
Small
Slimline

adjustment of the adjusting ring or adjusting screw (in mm)

P

re

s

s

in

g f

o

rc

e (

n

) f

o

r a m

a

c

h

in

e

s

p

in

d

le i

n

fe

e

d o

f -

1 m

m

steel

alloyed/

hardened steel

cast steel

plastic

stainless steel

aluminium

extra large

large

Medium with stronger spring

Medium

small

slimline

A

8 mm

}

background image

Subject to technical alterations.

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking and cleaning tools

7

Are you produCing yet or still lAbelling?
The calculaTion iS quiTe SimPle!

Through use of the amF marking tools, you demonstrably reduce your marking time in the machining centre
by over 75%.
you avoid long times for marking, and your machine can already work on the next job - so you save money.
Take the time and simply calculate your savings potential with the amF marking tool.

sAMple CustoMer CAlCulAtion beFore And AFter use oF the AMF MArking tool:

procedure

conventional marking process

Marking with the aMF marking tool

machine costs (in €/hr)

100

100

number of markings per shift (8 hr)

60

60

Time per marking procedure (in s)

60

12

Time per marking procedure per shift (in min)

60

12

costs for marking per shift

100.00 €

20.00 €

costs for marking per year (250 working days)

25,000.00 €

5,000.00 €

annual savings per shift

20,000.00 €

one-shift

60 min.

12 min.

20,000 €

40,000 €

60,000 €

two-shifts

three-shrifts

conventional

marking process

drAstiCAlly reduCed MArking tiMes guArAntee you will experienCe A rApid
rAtionAlisAtion eFFeCt

if previously 60 minutes had to be invested per shift for 60 markings in the machining centre, you reduce the
pure marking time to 12 minutes through use of the amF marking tool. Through the automated exchange of the
workpiece and the ability of the tool to mark quickly, you achieve savings consistently.
The savings in our customer example of €60,000 per year, for three-shift production utilisation, guarantees rapid
amortisation of the invested amounts of approx. €1,600 for an amF-Writer extra large.

savings with the amF marking tools

marking time

amF marking tools

background image

Subject to technical alterations.

8

Marking and cleaning tools

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking tool, suitable for 20 mm collets and Weldon holders

(Weldon holders only when using the function check).

Marking needles are not included.

AMF Marker Extra Large

No. 1550MXL

Order

no.

D1

[mm]

D2

[mm]

D3

[mm]

D4

[mm]

D5

[mm]

L1

[mm]

L2

[mm]

L3

[mm]

L4

[mm]

L5

[mm]

L6

[mm]

Weight

[g]

548180

4

20

26

40

46

125,5

118

7,5

26

74

36

326

Application:

Material and surface quality:

The AMF-Marker Extra Large is particularly suitable for the labelling of alloyed steel, hardened steel

or cast steel. The surface of the component can be rough and uneven.

Type size and type width:

Centric marking needles are suitable for small letters and narrow lines. The font becomes wider by

the use of eccentric marking needles and the rotation of the machine spindle. To ensure a good text,

please observe the following note:

Spindle speed (1/min) / 10 = feed rate (mm/min)

Max. permissible spindle speed: 8,000 1/min

Needle pressure and batch size setting:

It is possible to adjust the needle pressure in the clamped state of the tool by the external adjusting

ring. For this reason, we also recommend the AMF-Marker Extra Large for small batch sizes, or for

batch size 1.

Features:

Change and choice of needle:

Instant change of needle by pulling out the marking needle using pliers, for example, with our special

pliers No. 1530Z. Centric and eccentric needles are obtainable for the AMF-Marker Extra Large.

Function check:

Thanks to the possibility of checking the presence of the marking needle by means of an optional

pneumatic dynamic pressure query, the AMF-Marker Extra Large is also ideally suited for use in

automation.

Advantage:

- Labelling of alloyed steel, hardened steel or cast steel with rough and uneven surface

- Centric and eccentric marking needles available

- External adjusting ring for adjusting the needle pressure

- instant change of needle

- Function check possible

Order

no.

Needle

D1

[mm]

L1

[mm]

L2

[mm]

R1

[mm]

Weight

[g]

550468

MXLN-90R05 Ex00

4

47

0,0

0,5

8

550469

MXLN-90R10 Ex00

4

47

0,0

1,0

8

550470

MXLN-90R10 Ex01

4

47

0,1

1,0

8

550471

MXLN-90R10 Ex02

4

47

0,2

1,0

8

550472

MXLN-90R10 Ex03

4

47

0,3

1,0

8

fits AMF Marker Extra Large No. 1550MXL.

Marking needle

No. 1550MXLN

Note:

Centric marking needles:

550468: radius 0.5 mm, eccentricity 0.0 mm, minimum character size: legible from approx. 2 mm

550469: radius 1.0 mm, eccentricity 0.0 mm, minimum character size: legible from approx. 4 mm

Eccentric marking needles:

550470: radius 1.0 mm, eccentricity 0.1 mm, minimum character size: legible from approx. 5 mm

550471: radius 1.0 mm, eccentricity 0.2 mm, minimum character size: legible from approx. 6 mm

550472: radius 1.0 mm, eccentricity 0.3 mm, minimum character size: legible from approx. 7 mm

AMF Marker extra large

background image

Subject to technical alterations.

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking and cleaning tools

9

Order

no.

D1

[mm]

D2

[mm]

D3

[mm]

D4

[mm]

D5

[mm]

L1

[mm]

L2

[mm]

L3

[mm]

L4

[mm]

L5

[mm]

L6

[mm]

Weight

[g]

550223

3

20

24

36

42

119

113

6

26

65

36

263

Marking tool, suitable for 20 mm collets and Weldon holders

(Weldon holders only when using the function check).

Marking needles are not included.

AMF Marker Large

No. 1560ML

Application:

Material and surface quality:

The AMF-Marker Large is suitable for the labelling of different materials, but especially for the

labelling of steel and stainless steel. The surface of the component can be uneven.

Type size and type width:

Centric marking needles are suitable for small letters and narrow lines. The font becomes wider by

the use of eccentric marking needles and the rotation of the machine spindle. To ensure a good text,

please observe the following note:

Spindle speed (1/min) / 10 = feed rate (mm/min)

Max. permissible speed: 8,000 1/min

Needle pressure and batch size setting:

It is possible to adjust the needle pressure in the clamped state of the tool by the external adjusting

ring. For this reason, we also recommend the AMF-Marker Large for small batch sizes, or for batch

size 1.

Features:

Change and choice of needle:

Instant change of needle by pulling out the marking needle using pliers, for example, with our special

pliers No. 1530Z. Centric and eccentric needles are obtainable for the AMF-Marker Large.

Function check:

Thanks to the possibility of checking the presence of the marking needle by means of an optional

pneumatic dynamic pressure query, the AMF-Marker Extra Large is also ideally suited for use in

automation.

Advantage:

-  Labelling of various materials, but especially labelling of steel and stainless steel, also with uneven

surface

- Centric and eccentric marking needles available

- External adjusting ring for adjusting the needle pressure

- Instant change of needle

- Function check possible

Order

no.

Needle

D1

[mm]

L1

[mm]

L2

[mm]

R1

[mm]

Weight

[g]

550473

MLN-90R05 Ex00

3

53,5

0,0

0,5

5

550474

MLN-90R10 Ex00

3

53,5

0,0

1,0

5

550475

MLN-90R10 Ex01

3

53,5

0,1

1,0

5

550476

MLN-90R10 Ex02

3

53,5

0,2

1,0

5

550477

MLN-90R10 Ex03

3

53,5

0,3

1,0

5

fits AMF Marker Large No. 1560ML.

Marking needle

No. 1560MLN

Note:

Centric marking needles:

550473: radius 0.5 mm, eccentricity 0.0 mm, minimum character size: legible from approx. 2 mm

550474: radius 1.0 mm, eccentricity 0.0 mm, minimum character size: legible from approx. 4 mm

Eccentric marking needles:

550475: radius 1.0 mm, eccentricity 0.1 mm, minimum character size: legible from approx. 5 mm

550476: radius 1.0 mm, eccentricity 0.2 mm, minimum character size: legible from approx. 6 mm

550477: radius 1.0 mm, eccentricity 0.3 mm, minimum character size: legible from approx. 7 mm

AMF Marker large

background image

Subject to technical alterations.

10

Marking and cleaning tools

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

fits AMF Marker Medium No. 1570MM.

Marking needle

No. 1570MMN

Order

no.

Needle

D1

[mm]

L1

[mm]

L2

[mm]

R1

[mm]

Weight

[g]

550478

MMN-90R05 Ex00

3

36

0,0

0,5

3

550479

MMN-90R10 Ex00

3

36

0,0

1,0

3

552308

MMN-90R10 Ex01

3

36

0,1

1,0

3

552310

MMN-90R10 Ex02

3

36

0,2

1,0

3

552311

MMN-90R10 Ex03

3

36

0,3

1,0

3

Note:

Centric marking needles:

550478: radius 0.5 mm, eccentricity 0.0 mm, minimum character size: legible from approx. 2 mm

550479: radius 1.0 mm, eccentricity 0.0 mm, minimum character size: legible from approx. 4 mm

Eccentric marking needles:

552308: radius 1.0 mm, eccentricity 0.1 mm, minimum character size: legible from approx. 5 mm

552310: radius 1.0 mm, eccentricity 0.2 mm, minimum character size: legible from approx. 6 mm

552311: radius 1.0 mm, eccentricity 0.3 mm, minimum character size: legible from approx. 7 mm

Application:

Material and surface quality:

The AMF-Marker Medium is suitable for the labelling of different materials, but especially for the

labelling of aluminium, plastic, steel and stainless steel. The surface of the component can be

uneven.

Type size and type width:

Centric marking needles are suitable for small letters and narrow lines. The font becomes wider by

the use of eccentric marking needles and the rotation of the machine spindle. To ensure a good text,

please observe the following note:

Spindle speed (1/min) / 10 = feed rate (mm/min)

Max. permissible speed: 8,000 1/min

Needle pressure and batch size setting:

It is possible to adjust the needle pressure using the internal adjusting screw. Since the tool is

removed from the holder to do this, we recommend the AMF-Marker Medium for medium and large

batch sizes.

Features:

Change and choice of needle:

Instant change of needle by pulling out the marking needle using pliers, for example, with our special

pliers No. 1530Z. Centric and eccentric needles are obtainable for the AMF-Marker Medium.

Dimensions and machine size:

Thanks to its compact design, the AMF-Marker Medium fits into the tool magazine of milling

machines and lathes.

Advantage:

-  Labelling of various materials, but especially labelling of aluminium, plastic, steel and stainless

steel, also with uneven surface

- Centric and eccentric marking needles available

- Internal adjusting screw for adjusting the needle pressure

- Instant change of needle

- Compact design

Marking tool suitable for 20 mm collets and Weldon holders.

552306:  lower pressing force, ideally suited for aluminium in

conjunction with marking needle 550479

556949:  higher pressing force, ideally suited for steel and

stainless steel

Marking needles are not supplied as standard.

AMF Marker Medium

No. 1570MM

Order

no.

D1

[mm]

D2

[mm]

L1

[mm]

L2

[mm]

L3

[mm]

L4

[mm]

L5

[mm]

L6

[mm]

L7

[mm]

L8

[mm]

Weight

[g]

552306

3

20

93

88

6

65

50

46,5

8

6

78

556949

3

20

93

88

6

65

50

46,5

8

6

78

new

!

AMF Marker Medium

background image

Subject to technical alterations.

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking and cleaning tools

11

Marking tool, suitable for 12 mm collets and Weldon holders.

Marking needles are not included.

AMF Marker Small

No. 1580MS

Order

no.

D1

[mm]

D2

[mm]

L1

[mm]

L2

[mm]

L3

[mm]

L4

[mm]

L5

[mm]

Weight

[g]

550225

3

12

69

66

3,5

49

34

21

Application:

Material and surface quality:

The AMF-Marker Small is particularly suitable for the labelling of plastics and materials with similar

material properties as well as for the labelling of steel and stainless steel. The surface of the

component should already be machined.

Type size and type width:

Centric marking needles are suitable for small letters and narrow lines.

Needle pressure and batch size setting:

It is possible to adjust the needle pressure using the internal adjusting screw. Since the tool is

removed from the holder to do this, we recommend the AMF-Marker Small for medium and large

batch sizes.

Features:

Change and choice of needle:

Instant change of needle by pulling out the marking needle using pliers, for example, with our special

pliers No. 1530Z. Centric needles are obtainable for the AMF-Marker Small.

Dimensions and machine size:

Thanks to its very compact design, the AMF-Marker Small fits into the tool magazine of milling

machines and lathes.

Advantage:

-  Labelling of plastics and materials with similar material properties, but also labelling of steel and

stainless steel, with even surface

- Centric marking needles available

- Internal adjusting screw for adjusting the needle pressure

- Instant change of needle

- Very compact design

fits AMF Marker Small No. 1580MS.

Marking needle

No. 1580MSN

Order

no.

Needle

D1

[mm]

L1

[mm]

R1

[mm]

Weight

[g]

550481

MSN-90R03 Ex00

3

26

0,3

2

550480

MSN-90R05 Ex00

3

26

0,5

2

Note:

Centric marking needles:

550481: radius 0.3 mm, eccentricity 0.0 mm, minimum character size: legible from approx. 1.2 mm

550480: radius 0.5 mm, eccentricity 0.0 mm, minimum character size: legible from approx. 2 mm

AMF Marker small

background image

Subject to technical alterations.

12

Marking and cleaning tools

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking tool with long, narrow tip, suitable for 12 mm collets and

Weldon holders.

Marking needles are not included.

AMF Marker Slimline

No. 1590MSL

Order

no.

D1

[mm]

D2

[mm]

D3

[mm]

L1

[mm]

L2

[mm]

L3

[mm]

L4

[mm]

L5

[mm]

L6

[mm]

Weight

[g]

550226

3

12

6

95

86

9,5

59

44

75

29

fits AMF Marker Slimline No. 1580MSL.

Marking needle

No. 1590MSLN

Order

no.

Needle

D1

[mm]

L1

[mm]

R1

[mm]

Weight

[g]

550483

MSLN-90R03 Ex00

3

42

0,3

4

550482

MSLN-90R05 Ex00

3

42

0,5

4

Note:

Centric marking needles:

550483: radius 0.3 mm, eccentricity 0.0 mm, minimum character size: legible from approx. 1.2 mm

550482: radius 0.5 mm, eccentricity 0.0 mm, minimum character size: legible from approx. 2 mm

AMF Marker slimline

Application:

Material and surface quality:

The AMF-Marker Slimline is particularly suitable for the labelling of plastics and materials with similar

material properties as well as for the labelling of steel and stainless steel in extremely confined

spaces. The surface of the component can be slightly uneven.

Type size and type width:

Centric marking needles are suitable for small letters and narrow lines.

Needle pressure and batch size setting:

It is possible to adjust the needle pressure using the internal adjusting screw. Since the tool is

removed from the holder to do this, we recommend the AMF-Marker Small for medium and large

batch sizes.

Features:

Change and choice of needle:

Instant change of needle by pulling out the marking needle using pliers, for example, with our special

pliers No. 1530Z. Centric needles are obtainable for the AMF-Marker Slimline.

Dimensions and machine size:

Thanks to its very compact design, the AMF-Marker Slimline fits into the tool magazine of milling

machines and lathes.

Advantage:

-  Labelling of plastics and materials with similar material properties, but also labelling of steel and

stainless steel, with slightly uneven surface in extremely confined spaces

- Centric marking needles available

- Internal adjusting screw for adjusting the needle pressure

- Instant change of needle

- Very compact design

background image

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking and cleaning tools

13

Subject to technical alterations.

special pliers

With one-sided plastic protective covering.

Special pliers

No. 1530Z

Order

no.

B

[mm]

L

[mm]

Weight

[g]

552953

55

150

150

Application:

The tool is suitable for fast and safe replacement of the marking needles of all AMF markers. It can be

used for marking needles with diameters 3 and 4 mm.

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking and cleaning tools

13

background image

Subject to technical alterations.

14

Marking and cleaning tools

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Application:

This tool is especially suitable for marking uneven or rough surfaces with a large font (font size legible

from 4 mm) and wide line thickness with a hardness of up to 50 HRC. Workpiece unevenness is

compensated for. The marking speed depends on the feed rate of the machine and is independent of

the spindle speed. The workpiece surface can be machined either dry or wet.

Features:

The AMF-Writer Extra Large has reinforced guides and a broader special needle. The setting is made

continuously through a knurled nut and can be determined by means of a scale.  Due to this setting

capability with the knurled nut, the tool is optimally suited for small and medium lot sizes. The tool is

held preferably in 20 mm collets or Weldon holders.

Advantage:

- Extremely high wear resistance

- Suitable for marking rough and uneven materials

- Easy adjustment by means of a knurled nut (possible also when clamped)

Marking tool,

fits 20 mm collets and Weldon holders.

AMF-Writer Extra Large

No. 1400WXL

AMF-writer extra large

Order

no.

D1

[mm]

D2

[mm]

D3

[mm]

D4

[mm]

D5

[mm]

L1

[mm]

L2

[mm]

L3

[mm]

L4

[mm]

L5

[mm]

L6

[mm]

17475

4

20

26

40

46

126

113

13

26

74

36

Dimensions:

Order

no.

Needle

R1

[mm]

Speed

[1/min]

Max. marking speed

[m/min]

Weight

[g]

17475

60R10 Ex00

1,0

0-300

200

318

background image

Subject to technical alterations.

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking and cleaning tools

15

Marking tool,

fits 20 mm collets and Weldon holders.

AMF-Writer Large

No. 1410WL

Application:

The tool is ideal for marking a wide variety of materials such as aluminium, titanium, steel, bronze,

copper, brass, plastics etc.

Two needle types are available.

-  Needle 90R10 Ex00 is optimal for marking with a large font (font size legible from 4 mm) and wide

line thickness on surfaces with a hardness of up to 50 HRC.

-  Needle 90R05 Ex00 is optimal for marking with a small font (font size legible from 2 mm) and

medium, but deeper line thickness on surfaces with a hardness of up to 55 HRC.

Workpiece unevenness is compensated for. The marking speed depends on the feed rate of the

machine and is independent of the spindle speed. The workpiece surface can be machined either dry

or wet.

Features:

The AMF-Writer Large has high-quality guides and a robust special needle. The setting is made

continuously through a knurled nut and can be determined by means of a scale. Due to this setting

capability with the knurled nut, the tool is optimally suited for small and medium lot sizes. The tool is

held preferably in 20 mm collets or Weldon holders.

Advantage:

- High wear resistance

- Suitable for marking a wide variety of materials

- Easy adjustment by means of a knurled nut (possible also when clamped)

AMF-writer large

Order

no.

D1

[mm]

D2

[mm]

D3

[mm]

D4

[mm]

D5

[mm]

L1

[mm]

L2

[mm]

L3

[mm]

L4

[mm]

L5

[mm]

L6

[mm]

17418

3

20

24

36

42

119

108

11

26

65

36

17426

3

20

24

36

42

119

108

11

26

65

36

Dimensions:

Order

no.

Needle

R1

[mm]

Speed

[1/min]

Max. marking speed

[m/min]

Weight

[g]

17418

90R10 Ex00

1,0

0-300

200

243

17426

90R05 Ex00

0,5

0-300

200

243

background image

Subject to technical alterations.

16

Marking and cleaning tools

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Application:

The tool is ideal for marking a wide variety of materials such as aluminium, titanium, steel, bronze,

copper, brass, plastics etc.

Two needle types are available.

-  Needle 90R10 Ex00 is optimal for marking with a large font (font size legible from 4 mm) and wide

line thickness on surfaces with a hardness of up to 50 HRC.

-  Needle 90R05 Ex00 is optimal for marking with a small font (font size legible from 2 mm) and

medium, but deeper line thickness on surfaces with a hardness of up to 55 HRC.

Workpiece unevenness is compensated for. The marking speed depends on the feed rate of the

machine and is independent of the spindle speed. The workpiece surface can be machined either dry

or wet.

Features:

The AMF-Writer Medium has high-quality guides and a robust special needle. Setting occurs

steplessly via an inside screw, which can be adjusted using a hexagon wrench. Because this tool has

to be removed from the holder in order to be set, it is optimally suited for large-scale production. The

tool is held preferably in 20 mm collets or Weldon holders.

Advantage:

- High wear resistance

- Suitable for marking a wide variety of materials

- Compact design

Marking tool,

fits 20 mm collets and Weldon holders.

AMF-Writer Medium

No. 1420WM

AMF-writer Medium

1

2

3

Examples of marking on various materials:

1. stainless steel  2. aluminium  3. plastics

Order

no.

D1

[mm]

D2

[mm]

L1

[mm]

L2

[mm]

L3

[mm]

L4

[mm]

17434

3

20

97

87

10

50

17442

3

20

97

87

10

50

Dimensions:

Order

no.

Needle

R1

[mm]

Speed

[1/min]

Max. marking speed

[m/min]

Weight

[g]

17434

90R10 Ex00

1,0

0-300

200

78

17442

90R05 Ex00

0,5

0-300

200

78

background image

Subject to technical alterations.

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking and cleaning tools

17

Marking tool,

fits 12 mm collets and Weldon holders.

AMF-Writer Small

No. 1430WS

Application:

The tool is ideal for marking a wide variety of materials such as aluminium, titanium, steel, bronze,

copper, brass, plastics etc.

Two needle types are available.

-  Needle 90R05 Ex00 is optimal for marking with a small font (font size legible from 2 mm) and

medium line thickness on surfaces with a hardness of up to 55 HRC.

-  Needle 90R03 Ex00 is optimal for marking with a small font (font size legible from 1.2 mm) and

small, but deeper line thickness on surfaces with a hardness of up to 57 HRC.

Workpiece unevenness is compensated for. The marking speed depends on the feed rate of the

machine and is independent of the spindle speed. The workpiece surface can be machined either dry

or wet.

Features:

The AMF-Writer Small has high-quality guides and a robust special needle. Setting occurs steplessly

via an inside screw, which can be adjusted using a hexagon wrench. Because this tool has to be

removed from the holder in order to be set, it is optimally suited for large-scale production. The tool is

preferably received into 12 mm collets or Weldon holders.

Advantage:

- High wear resistance

- Suitable for marking a wide variety of materials

- Very compact design

AMF-writer small

Order

no.

D1

[mm]

D2

[mm]

L1

[mm]

L2

[mm]

L3

[mm]

L4

[mm]

17459

3

12

72

66

6

34

17467

3

12

72

66

6

34

Dimensions:

Order

no.

Needle

R1

[mm]

Speed

[1/min]

Max. marking speed

[m/min]

Weight

[g]

17459

90R05 Ex00

0,5

0-300

200

24

17467

90R03 Ex00

0,3

0-300

200

24

background image

Subject to technical alterations.

18

Marking and cleaning tools

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking tool with long, narrow tip,

fits 12 mm collets and Weldon holders.

AMF-Writer Slimline

No. 1440WSL

Order

no.

D1

[mm]

D2

[mm]

D3

[mm]

L1

[mm]

L2

[mm]

L3

[mm]

L4

[mm]

L5

[mm]

535146

3

12

6

85

76

9

34

65

535161

3

12

6

85

76

9

34

65

Dimensions:

Application:

The tool is especially well-suited for marking in a very confined spaces.

A wide variety of materials such as aluminium, titanium, steel, bronze, copper, brass, plastics etc. can

be marked.

Two needle types are available.

-  Needle 90R05 Ex00 is optimal for marking with a small font (font size legible from 2 mm) and

medium line thickness on surfaces with a hardness of up to 55 HRC.

-  Needle 90R03 Ex00 is optimal for marking with a small font (font size legible from 1.2 mm) and

small, but deeper line thickness on surfaces with a hardness of up to 57 HRC.

Workpiece unevenness is compensated for. The marking speed depends on the feed rate of the

machine and is independent of the spindle speed. The workpiece surface can be machined either dry

or wet.

Features:

The AMF Slimline writer has high-quality guides and a robust special needle. It has an outstanding

narrow tip. Setting occurs steplessly via an inside screw, which can be adjusted using a hexagon

wrench. Because this tool has to be removed from the holder in order to be set, it is optimally suited

for large-scale production. The tool is preferably received into 12 mm collets or Weldon holders.

Advantage:

- High wear resistance

- Suitable for marking a wide variety of materials

- Very compact design

- Long, narrow tip for use in confined spaces (e.g. in grooves)

AMF-writer slimline

Order

no.

Needle

R1

[mm]

Speed

[1/min]

Max. marking speed

[m/min]

Weight

[g]

535146

90R05 Ex00

0,5

0-300

200

28

535161

90R03 Ex00

0,3

0-300

200

28

background image

Subject to technical alterations.

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking and cleaning tools

19

AMF-writer in use

background image

Subject to technical alterations.

20

Marking and cleaning tools

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

AMF-Cleaner in use

background image

Subject to technical alterations.

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking and cleaning tools

21

AMF-CleAner and your machine cleanS

iTSelF

amF-cleaners are tools for cleaning workpieces, tools and
the interior of cnc machines. They are preferably clamped
in Weldon chucks and mounted in the machine spindle of a
cnc machine.

amF cleaners use through spindle coolant or compressed
air.
amF cleaners in Stick design are available in lengths of 30,
100 and 180 mm and are ideally suitable for cleaning swarf
from workpeices, vices and fixtures prior to unloading the
workpeice and before the next workpeice is loaded. The
spindle can be static or a slow rotation may be used to
improve cleaning operation.

amF cleaners in the Ball design are available with horizontal
or vertical connection to the machine spindle and are
designed for cleaning the entire interior working area of the
machine tool. The user selects which nozzles to open which
controls the direction and pressure of the jet. moving and
rotating the spindle under constand flow of coolant achieves
and excellent and systematic cleaning of the machine
interior.

our amF-cleaners are characterised by low acquisition
costs and a long service life - their time saving will impress
you.

Your benefits at a glance:

>

repeatable, systematic and thorough cleaning

>

no aerosol pollution harmful to the health of the machine operator

>

reduction of the cleaning time

>

preserves the machine guides

>

no risk of injury due to swarf

background image

Subject to technical alterations.

22

Marking and cleaning tools

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

in Clean Case.

Cleaning tools for attachment to the machine spindle, fits 16 mm

Weldon holders.

Components:

1 AMF Cleaner, Ball Horizontal

1 AMF Cleaner, Ball Vertical Control

1 AMF Cleaner, Stick 30 mm

1 AMF Cleaner, Stick 100 mm

1 AMF Cleaner, Stick 180 mm

3 multi-purpose nozzles

1 pressure gauge

1 adapter

1 ball joint

4 replacement lock screws

1 hexagon screwdriver

Operating Manual

AMF-Cleaner

No. 1500CC

AMF-Cleaner

Application:

BALL:

The cleaning range of the AMF Cleaner is 360° and can be shaped through the number of opened

outlets. The horizontal version of the tool with side connection even permits cleaning of the spindle

tip. The control version allows connection of a pressure gauge to monitor the condition of the pump,

filter and entire supply line.

STICK:

This tool is essential for automation of a CNC machine.

It gives the machine the ability to mechanically clean workpieces and clamping fixtures. The effect of

the AMF Cleaner is adapted to the local conditions by the selective travel to different positions with a

rotating tool. Due to its shape and the different lengths, it is especially well-suited for cleaning holes,

pockets, undercuts or other contours. Thanks to 3 different universal nozzles (UN), the intensity of the

cleaning jet can be influenced as well.

The adapters permit 2 cleaners to be connected together and extended in order to penetrate into

lower-lying working areas.

The ball joint also enables an oblique nozzle position, allowing the jet angle to be controlled. The

AMF Cleaner cleans at high-speed and can be integrated into the automation cycle quickly and

easily by means of a short subroutine.

Features:

BALL:

Working range up to 360°

KSS pressure range 5 to 120 bar

Outlets (horizontal) 15

Outlets (vertical) 14

Minimum speed 5  rpm

Maximum speed 100  rpm

Working medium Cooling lubricant

Weight, horizontal vers. 409 g

Weight, vertical vers. 331 g

STICK:

KSS pressure range  5 to 120 bar

Compressed-air pressure range 5 to 10 bar

Outlets 3

Minimum speed 30    rpm

Maximum speed 400  rpm

Working medium Cooling lubricant,

Compressed air

Weight, vers. L=30 50 g

Weight, vers. L=100 133 g

Weight, vers. L=180 208 g

Advantage:

BALL:

- Repeatable, systematic and thorough cleaning of the inside of the machine

- No aerosol pollution harmful to the health of the machine operator

- Reduction of cleaning time

STICK:

- Repeatable, systematic and thorough cleaning of the workpiece or clamping fixture

- No aerosol pollution harmful to the health of the machine operator

- Reduction of cleaning time

BALL VERTICAL CONTROL

STICK

30 mm

BALL HORIZONTAL

STICK

180 mm

STICK

100mm

Order

no.

Insertion depth A

[mm]

Dimensions of case LxWxH

[mm]

Weight

[g]

17558

40

270 x 230 x 70

1637

Outlets

Outlets

Outlets

pressure

gauge

background image

Subject to technical alterations.

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking and cleaning tools

23

AMF-Cleaner, ball

Cleaning tool for attachment to the machine spindle fits 16 mm

Weldon holders.

AMF-Cleaner, Ball Vertical Control design

No. 1510CBVC

Cleaning tool for attachment to the machine spindle fits 16 mm

Weldon holders.

AMF-Cleaner, Ball Horizontal design

No. 1510CBH

Application:

The cleaning range of the AMF Cleaner is 360° and can be shaped through the number of opened

outlets. This version of the tool with side connection even permits cleaning of the spindle tip.

Features:

Working range  up to 360°

Outlets 15

Working medium  Cooling lubricant

Advantage:

- Repeatable, systematic and thorough cleaning of the inside of the machine

- No aerosol pollution harmful to the health of the machine operator

- Reduction of cleaning time

Application:

The cleaning range of the AMF Cleaner is 360° and can be shaped through the number of opened

outlets. Through the optional installation of a pressure gauge, the status of the pump, filter and entire

supply line can be checked.

Features:

Working range  up to 360°

Outlets 14

Working medium  Cooling lubricant

Advantage:

- Repeatable, systematic and thorough cleaning of the inside of the machine

- No aerosol pollution harmful to the health of the machine operator

- Reduction of cleaning time

Order

no.

D1

[mm]

D2

[mm]

L1

[mm]

Insertion depth A

[mm]

max. r.p.m.

[1/min]

Min. KSS pressure

[bar]

Max. KSS

pressure

[bar]

Weight

[g]

17590

16

60

110

40

100

5

120

331

Order

no.

D1

[mm]

L1

[mm]

L2

[mm]

Insertion depth A

[mm]

max. r.p.m.

[1/min]

Min. KSS pressure

[bar]

Max. KSS

pressure

[bar]

Weight

[g]

17582

16

120

64

40

100

5

120

409

Outlets

Outlets

background image

Subject to technical alterations.

24

Marking and cleaning tools

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Application:

The pressure gauge is screwed into the AMF Cleaner, Ball Vertical Control (CBVC) design, and

serves to control the cooling lubricant pressure actually present. This is helpful for checking the

necessary supply pressure of the AMF Cleaner, and the cooling lubricant pressure of the machine

tool that is actually present can also be checked with this measuring tool. Based on this, conclusions

can be made about the condition of the pump, filter and supply line.

Features:

Working medium       Cooling lubricant

Advantage:

- Possibility to check the KSS pressure of the machine tool

- Pressure necessary for AMF Cleaner can be checked

Accessory for AMF Cleaner, ball design

Pressure gauge

No. 1510CZ

pressure gauge

Order

no.

D1

[mm]

D2

[mm]

L1

[mm]

L2

[mm]

L3

[mm]

L4

[mm]

max. r.p.m.

[1/min]

Min. KSS pressure

[bar]

Max. KSS

pressure

[bar]

Weight

[g]

17715

44

G1/8

26

34

46

14

100

0

60

67

background image

Subject to technical alterations.

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking and cleaning tools

25

Application:

This tool is essential for automation of a CNC machine. It gives the machine the ability to

mechanically clean workpieces and clamping fixtures. The effect of the AMF Cleaner is adapted to

the local conditions by the selective travel to different positions with a rotating tool. Due to its shape

and the different lengths, it is especially suitable for cleaning holes, pockets, undercuts or other

contours. Through selection from 3 different universal nozzles (UN), you can influence the intensity

of the cleaning jet. The AMF Cleaner cleans at high-speed and can be integrated into the automation

cycle quickly and easily by means of a short subroutine.

Features:

KSS pressure range  5 to 120 bar

Compressed-air pressure range 5 to 10 bar

Outlets 3

Minimum speed  30    rpm

Maximum speed  400  rpm

Working medium  Cooling lubricant, compressed air

Put your cleaner together individually. The pipe and universal nozzle are ordered separately.

Advantage:

- Repeatable, systematic and thorough cleaning of the workpiece or clamping fixture

- No aerosol pollution harmful to the health of the machine operator

- Reduction of cleaning time

AMF Cleaner,

fits stick design.

Designs:

Order No. 17632: Low flow

Order No. 17640: Standard

Order No. 17657: High flow

AMF-Cleaner, universal nozzles

No. 1520CZ

Cleaning tool for attachment to the machine spindle

fits 16 mm Weldon holders.

Designs:

Order No. 17608: Short

Order No. 17616: Standard

Order No. 17624: Long

AMF-Cleaner, stick design

No. 1520CS

AMF-Cleaner, stick design

Order

no.

Universal nozzle

D1

[mm]

L5

[mm]

Weight

[g]

17632

UD40

16

10

14

17640

UD45

16

10

14

17657

UD50

16

10

14

Order

no.

Pipe

D1

[mm]

Insertion depth L1

[mm]

L2

[mm]

L3

[mm]

L4

[mm]

Weight

[g]

17608

30

16

40

30

-

-

50

17616

100

16

40

-

100

-

133

17624

180

16

40

-

-

180

208

Outlets

background image

Subject to technical alterations.

26

Marking and cleaning tools

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Accessory for AMF Cleaner, stick design

Order No. 17699: ball joint

Order No. 17673: adapter

Ball joint and adapter

No. 1520CZ

Application:

Adapter:

Adapters are used to connect 2 or more AMF Cleaners to each other. The adapter is simply screwed

on instead of the universal nozzle of an AMF Cleaner. The length of the cleaning tool can thus be

varied.

Ball joint:

Ball joints are used to connect movably 2 or more AMF Cleaners to each other. The universal nozzle

attached to the front or an additional AMF Cleaner can be deflected up to 30 degrees through the ball

joint.

Order information:  To deflect an additional AMF Cleaner, the adapter is needed in addition to the ball

joint.

Features:

Working medium       Cooling lubricant, compressed air

Advantage:

- Modular design for individual applications

- Cost savings through simple expansion possibilities

Order

no.

D1

[mm]

D2

[mm]

D3

[mm]

L1

[mm]

L2

[mm]

L3

[mm]

17699

G1/8

G1/4

8

26

34

24

17673

G1/8

G1/4

5,2

25

4,5

14

Dimensions:

Order No. 17699: ball joint

Order No. 17673: adapter

ball joint and adapter

Order

no.

max. r.p.m.

[1/min]

Min. KSS pressure

[bar]

Max. KSS

pressure

[bar]

Min. air pressure

[bar]

Min. air pressure

[bar]

Weight

[g]

17699

60

5

120

5

10

66

17673

400

5

120

5

10

13

ZERO-POINT

-SYSTEMS

CATAL

OGUE

2019

/2020

ZERO-

POINT-

SYSTEMS

CATAL

OGUE 20

19/20

20

Reque

st addi

tional ca

talogue

s from

www

.amf.d

e

All sale

s are s

ubject t

o our te

rms of s

ale, de

livery, a

nd pay

ment. A

ll rights f

or desi

gn, pho

tograp

hs and t

exts re

served b

y the p

ublishe

r, AMF.

No pho

tomec

hanica

l reprod

uction w

ithout o

ur expr

ess pe

rmission

. 2019/

2020/3

EN > M

G 4./08

/2018 > P

rinted i

n Germ

any

Order

no. 18

9308

∙ € 3,6

0

Andr

EAs M

AiEr

GmbH & C

o. KG

Waibling

er Stra

ße 116

∙ D-707

34 Fellba

ch

Phone

:  +49 7

11 5766

-0

Fax:

+49 711

57572

5

E-mail:

amf@

amf.de

Web:

www.a

mf.de

ZERO-

POINT-S

YSTEM

S

HyDrau

lic cl

amPin

g SySt

emS

marki

ng an

D clea

ning t

oolS

StanD

arD cl

amPing

SyStem

S

Wirel

eSS Sen

Soring

SyStem

S

toggl

e clam

PS

magn

etic c

lamPi

ng Sy

StemS

Vacuu

m cla

mPing

SyStem

S

Single

anD m

ultiPle

clam

Ping S

yStem

S

C

A

T

A

L

O

G

U

E

2

0

1

9

/20

20

Z

ER

O

-P

OI

NT

-S

Y

S

TE

MS

Katalog_2018-2019_ZPS_EN_Umschlag.indd

1

20.08.2018   09:59:31

background image

Subject to technical alterations.

∙ Web: www.amf.de

Marking and cleaning tools

27

zero point clamping technology to perfection

+  Outstanding pr

ice-performance ra

tio

+  Drastically red

uced tooling time

+   Immediate  imp

rovement

of productivity

+  Repeat accura

cy < 5um

+  Stainless steel
+  Form fit

ZERO-POINT

-SYSTEMS

CATAL

OGUE

2019

/2020

ZERO-

POINT-

SYSTEMS

CATAL

OGUE 20

19/20

20

Reque

st addi

tional ca

talogue

s from

www

.amf.d

e

All sale

s are s

ubject t

o our te

rms of s

ale, de

livery, a

nd pay

ment. A

ll rights f

or desi

gn, pho

tograp

hs and t

exts re

served b

y the p

ublishe

r, AMF.

No pho

tomec

hanica

l reprod

uction w

ithout o

ur expr

ess pe

rmission

. 2019/

2020/3

EN > M

G 4./08

/2018 > P

rinted i

n Germ

any

Order

no. 18

9308

∙ € 3,6

0

Andr

EAs M

AiEr

GmbH & C

o. KG

Waibling

er Stra

ße 116

∙ D-707

34 Fellba

ch

Phone

:  +49 7

11 5766

-0

Fax:

+49 711

57572

5

E-mail:

amf@

amf.de

Web:

www.a

mf.de

ZERO-

POINT-S

YSTEM

S

HyDrau

lic cl

amPin

g SySt

emS

marki

ng an

D clea

ning t

oolS

StanD

arD cl

amPing

SyStem

S

Wirel

eSS Sen

Soring

SyStem

S

toggl

e clam

PS

magn

etic c

lamPi

ng Sy

StemS

Vacuu

m cla

mPing

SyStem

S

Single

anD m

ultiPle

clam

Ping S

yStem

S

C

A

T

A

L

O

G

U

E

20

1

9

/20

20

Z

ER

O

-P

OI

NT

-S

Y

S

TE

MS

Katalog_2018-2019_ZPS_EN_Umschlag.indd

1

20.08.2018   09:59:31

background image

28

Marking and cleaning tools

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

... by iteM no.

Article no.

Page

No. 1400WXL

14

No. 1410WL

15

No. 1420WM

16

No. 1430WS

17

No. 1440WSL

18

Article no.

Page

No. 1500CC

22

No. 1510CBH

23

No. 1510CBVC

23

No. 1510CZ

24

No. 1520CS

25

Article no.

Page

No. 1520CZ

25, 26

No. 1530Z

13

No. 1550MXL

8

No. 1550MXLN

8

No. 1560ML

9

Article no.

Page

No. 1560MLN

9

No. 1570MM

10

No. 1570MMN

10

No. 1580MS

11

No. 1580MSN

11

Article no.

Page

No. 1590MSL

12

No. 1590MSLN

12

... by order no.

Order no.

Page

174 18

15

17426

15

17434

16

17442

16

17459

17

17467

17

17475

14

175 58

22

17582

23

17590

23

Order no.

Page

176 08

25

17616

25

17624

25

17632

25

17640

25

17657

25

17673

26

17699

26

177 15

24

535 146

18

Order no.

Page

535161

18

548 180

8

550 223

9

550225

11

550226

12

550468

8

550469

8

550470

8

550471

8

550472

8

Order no.

Page

550473

9

550474

9

550475

9

550476

9

550477

9

550478

10

550479

10

550480

11

550481

11

550482

12

Order no.

Page

550483

12

552 306

10

552308

10

552310

10

552311

10

552953

13

556 949

10

... in AlphAbetiCAl order

Description

Page

A

AMF Marker Extra Large

8

AMF Marker Large

9

AMF Marker Medium

10

AMF Marker Slimline

12

AMF Marker Small

11

AMF-Cleaner

22

AMF-Cleaner, Ball Horizontal design

23

AMF-Cleaner, Ball Vertical Control design

23

AMF-Cleaner, stick design

25

AMF-Cleaner, universal nozzles

25

AMF-Writer Extra Large

14

Description

Page

AMF-Writer Large

15

AMF-Writer Medium

16

AMF-Writer Slimline

18

AMF-Writer Small

17

B

Ball joint and adapter

26

M

Marking needle

8, 9, 10, 11, 12

P

Pressure gauge

24

S

Special pliers

13

Contents ...

notes

background image

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking and cleaning tools

29

notes ...

background image

Subject to technical alterations.

30

Marking and cleaning tools

ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

The “clamping technology aPP” offers you an overview of
amF’s exciting clamping product range. no matter whether
mechanical, pneumatic, hydraulic or magnetic clamping
technology, as well as vacuum and zero point clamping systems
– all the products are presented in detail in this aPP, and you
can see the numerous application options of amF clamping
technology at a glance.

all products can be downloaded as 2d and 3d cad models, and
be conveniently imported into all standard cad programs.

also stay up-to-date and read our news and PdF catalogues on
your mobile device.

Test it now by downloading our clamping technology aPP
free-of-charge from the apple app Store or Google Play.

we generAte

exCiteMent –

on your moBile

DEvICE too

THE CLAMPING TEC

HNOLOGY APP –

FINd PrOduCTs, dO

wNLOAd

CAd dATA, sTAY IN

FOrMEd …

background image

2

Marking and cleaning tools

andreas Maier gmbH & co. kg ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

andreas Maier gmbH & co. kg ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de

Marking and cleaning tools

31

Terms of sale, delivery and Payment

These Terms of Payment apply for companies, legal entities governed by public law

and public law special funds. Our goods and services are supplied exclusively on the

basis of the following conditions. Any deviating purchasing conditions of the customer

not expressly recognised by us will not become part of the contract through acceptance

of the order. By placing the order and accepting the goods we deliver, the customer

confirms its consent to our terms and conditions.
1. Offer and contractual conclusion
All our offers are always subject to change without notice unless otherwise explicitly

agreed. Our delivery contracts are based on the latest version of our catalogue.

Dimension and weight values, as well as illustrations, drawings and data, are non-

binding and can be changed by us at any time. Therefore, deviations cannot be ruled

out and do not justify any compensation claims against us.

Orders  are  considered  accepted  only  when  confirmed  by  us  in  writing.  If,  for

organisational reasons, the customer does not receive a separate confirmation upon

the delivery of goods, the invoice shall also be deemed the order confirmation.
2. Prices
The prices are in EURO, ex-works, excluding VAT, packing, freight, postage and

insurance. Unless otherwise agreed, our list prices valid on the day of delivery

shall apply. For orders below 50 EUR goods net, we must make a minimum quantity

surcharge of a 10 EURO for cost reasons.
3. Tool costs
Unless any other agreements have been reached, the tools fabricated for the purpose

of executing the order shall remain our property in all cases, even if we have invoiced a

tool cost component separately.
4. Payment
Unless otherwise stated on the invoice, the purchase price falls due for net payment

within 30 days of the invoice date (without deduction of discount). Invoice amounts of

below 50 EURO are due for payment immediately.

In case of payment default, we shall be entitled to charge default interest. The amount

corresponds to our interest rate for current account credits at our main bank; the

minimum however being 8 percentage points above the relevant base interest rate

applied by the European Central Bank. Moreover, in case of default following written

notice  to  the  customer,  we  shall  be  entitled  to  cease  to  fulfil  our  obligations  until

payments are received.
5. No set-off
The customer can set-off only with legally confirmed or undisputed counterclaims.
6. Right of withdrawal in case of delayed acceptance or payment and insolvency
If  the  customer  fails  to  accept  the  goods  in  due  time,  we  shall  be  entitled  to  set  a

reasonable period of grace, after which we can dispose of the goods elsewhere and

supply the customer on a reasonably longer term. Our rights to withdraw from the

contract under the provisions of Section 326 BGB and demand damages for non-

performance  shall  not  be  affected.  If  the  customer  fails  to  pay  for  the  goods  once

payment is due, we shall be entitled, at the end of a reasonable period of grace we

have set, to withdraw from the contract and demand the return of any goods already

supplied. Section 323 BGB remains unaffected in all other cases.

If the customer applies for the opening of insolvency proceedings, we shall be entitled,

prior to the ordering of security measures by the insolvency court, to withdraw from the

contract and demand the immediate return of the goods.
7.  Customer-specific fabrications/project fabrications (custom fabrications)
Customer-specific  fabrications  require  binding  information  on  design,  quantity  etc.

in written form at the time of ordering. For manufacturing reasons, we reserve the

right to supply up to 10% above or below the order quantity. Technical modifications

or  cancellations  are  subject  to  any  costs  incurred.  The  return  of  customer-specific

fabrications is impossible.
8. Delivery and packaging, transfer of risk
The delivery date is non-binding; although stated to the best of our knowledge. It is

subject to us receiving correct, defect-free and complete deliveries. The stated delivery

dates relate to completion in the factory, starting on the day the order is accepted by us.

Delivery is EXW (ex-works) in accordance with Incoterms 2010. Therefore, the costs

are borne by the customer. The risk is transferred to the customer when the goods are

passed to the person, company or facility nominated to execute the shipment. This

applies also for partial deliveries, or if we have assumed responsibility for delivery and

installation. The risk shall be transferred to the customer even in the case of delayed

acceptance.

In  the  absence  of  specific  shipping  instructions,  we  shall  proceed  as  we  deem  fit

and without any obligation to the cheapest or most expedient method. The customer

agrees that the order can also be delivered in parts, insofar as this is reasonable for the

customer. We shall charge a 5 EURO processing free for shipping to third parties that

we supply on behalf of the customer.

The packaging complies with the packaging ordinance. Disposable packaging shall be

charged at cost price. The packaging cannot be taken back.
9. Performance impediment and/or impossibility
If we are hindered in the fulfilment of our obligation due to the onset of unforeseeable

circumstances, which we are unable to avoid despite reasonable effort in relation to

the nature of the circumstances (e.g. operational interruption, delay in the delivery of

important raw materials, defects in the delivery), the delivery time shall be extended

by a reasonable period, insofar as the supply of goods or services is not rendered

unreasonably difficult or impossible.

If  we  have  to  accept  that  these  circumstances  are  not  only  temporary,  we  shall  be

entitled to withdraw from the contract either in whole or in part.

If  the  supply  of  goods  or  services  becomes  impossible,  the  customer  shall  not  be

obliged to furnish its own contractual service. Section 275 BGB applies mutatis

mutandis.  If,  however,  the  customer  is  solely  or  predominantly  responsible  for  the

circumstances that led to impossibility, it shall remain under an obligation to render

the return service. The same applies if this circumstance occurs at a time when the

customer is behind schedule with acceptance.
10. Samples/returns
Samples shall be provided only against payment. If samples or models are provided,

a credit note shall be issued with the subsequent order if the order value is 125 EURO

net or more. Goods can be returned only by agreement, although custom fabrications

are excluded from such return.

In the case of returns for which we are not responsible (e.g. incorrect order), we shall

charge a processing fee of 10%, the minimum value, however, being 7.50 EURO.
11. Retention of title
The goods shall remain our property unless full payment of all claims and/or until

the cheques provided for this purpose are honoured. The itemisation of claims in an

ongoing invoice, as well as balancing the account and the recognition thereof does

not affect the retention of title. The customer is entitled to sell on the retained goods

during the ordinary course of business. However, the customer is not permitted to

pledge the goods or transfer them by way of security. It shall assign its claim ensuing

from the selling on of the retained goods to us in advance. The customer shall be

entitled to collect the claim to the extent that it has fulfilled its obligations towards us.

At our request, the customer shall be obliged to state third-party debtors and we shall

be entitled to report this and the assignment.
12. Property rights
We reserve property rights and copyrights to all contractual documents such as

drafts, drawings, calculations and cost estimates. Such documents must not be

reproduced or disclosed to third parties without our consent. Any rights to patents,

utility models etc. reside solely with us, insofar as such patents have not yet been

filed. Our products are allowed to be replicated only with our written consent.

If objects are fabricated according to drawings or samples, the customer shall warrant

that any third party property rights are not infringed by manufacture or delivery. If

a third party forbids manufacture and delivery on account of property rights, we

shall be entitled to stop manufacture and delivery immediately. The customer shall

be obliged to reimburse us with all costs incurred and indemnify us from third party

compensation claims. Compensation claims by the customer are impossible.
13. Warranty
If the customer agrees with us a particular quality of the goods, we shall base this

agreement on our technical delivery specifications. If we have to deliver according to

customer drawings, specifications, samples etc., the customer shall assume the risk

for suitability for the intended purpose. If, after the contract is concluded, the scope

of goods or services is changed at the customer‘s request and this impairs the quality

or suitability of the goods, claims for defects on the part of the customer shall be ruled

out, insofar as such impairments are caused by the customer‘s requests for change.

The time at which the risk is transferred is decisive for the contractual state of the

goods. Wear and tear of wearing parts caused by ordinary use does not constitute a

defect. Claims for defects are ruled out in the following cases in particular: Unsuitable

or improper use, incorrect installation and/or commissioning by the customer or third

party, normal wear and tear, incorrect or negligent handling - in particular excessive

use -, unsuitable equipment, replacement materials, chemical, electrochemical or

electrical influences, unless such defects are caused by ourselves.

If  the  goods  contain  a  defects,  we  shall  provide,  following  a  reasonable  period  of

grace set by the customer, either a replacement or a repair as we deem fit. If such

subsequent performance fails, the customer shall be entitled to either reduce the

purchase price or withdraw from the contract. Any further warranty claims are ruled

out. In case of negligible deviations from the agreed quality, no claims for defects

shall be recognised.

The discovery of defects must be communicated to us immediately in writing. In the

case of recognisable defects, however, within 10 days of acceptance, in the case of

non-recognisable defects immediately after they become evident. The warranty is 12

months, starting with delivery of the goods ex-works.
14. Liability
With the exception of harm to life, body or health on account of a breach of duty by

ourselves, our liability shall be limited to intent or gross negligence.
15. Place of fulfilment, place or jurisdiction and governing law
The place of fulfilment for all obligations ensuing from this contractual relationship is

D-70734 Fellbach.

The place of jurisdiction for all legal disputes ensuing from the contractual relationship

is the court responsible for the headquarters of Andreas Maier GmbH & Co. KG.

All disputes ensuing from the contract or regarding the validity thereof shall be finally

decided by a court of arbitration in accordance with the Court of Arbitration Ordinance

of the German Committee for Arbitration Court Procedures or the Conciliation and

Arbitration  Arrangement  of  the  International  Chamber  of  Commerce,  recourse  to

ordinary courts of law being excluded. The legal dunning process, however, remains

permissible.

German law shall govern (BGB and HGB). The applicability of the UN  Convention on

Contracts for the International  Sale of Goods  (CISG) is ruled out.
16. Severability clause
If  individual  provisions  become  legally  invalid,  the  remaining  provisions  shall  not

be affected. The legally invalid provision shall be replaced by regulations that most

closely reflect the economic purpose of the contract with reasonable consideration

for the mutual interests. The publication of these Terms of Sale, Delivery and Payment

renders all previous versions invalid. This does not apply for any contracts concluded

prior to announcement.

Pledges that count in everyday life

For this reason, we have a few principles that we follow by conviction
and which always apply..

individual develoPment
Even if the product you need does not even exist yet, we will find the
right solution with you: from special designs to new developments,
everything is possible.

Warranty
If, despite our high quality standard, there is a complaint, this is dealt
with quickly and unbureaucratically, even beyond the warranty period.

highest quality standards
Careful manufacturing based on tradition since 1890, and naturally
with a modern quality management system according to ISO 9001
for many years.

short delivery time
With over 5,000 articles in our warehouse, you can expect your order to
be dispatched on the same day.

comPetent service from exPerts
Your local retail partner or the specialists in our team will find the right
solution for every task.

made in germany
Our entire product range is developed and manufactured exclusively by
our employees in Germany.

WE GENERATE EXCITEMENT.

since the foundation of the company in 1890 until today the

goal has remained the same: the highest quality in products

and services. nevertheless, the circumstances, tasks and

challenges have changed, of course. By focussing on our core

areas of expertise, we have long set new standards for innovative

clamping technology - driven by our own development, the

greatest possible flexibility and passion for individual solutions.

all this is only possible with committed and contented

employees. respectful interaction with others, personal

development and measures for the wellbeing of each

individual are therefore values that matter to us.

our comPany history

1890   Company founded as a lock manufacturer by Andreas Maier.

1920   Product range extended to include spanners.

1928   Production line assembly of FELLBACH LOCKS.

1951   Introduces clamping elements and diversifies into workpiece

and tool clamping technology.

1965   Toggle clamps extend the AMF product range,

AMF catalogues are now printed in ten languages.

1975   Further specialisation into hydraulic clamping technology.

1982   Clamping and fixture systems round off AMF‘s clamping

expertise.

1996   AMF team organisation in all sectors of the business,

Quality management with certification to ISO 9001.

2001   AMF Service Guarantee for all products.

2004  Introduction of the ZPS zero-point clamping system.

2007  The magnetic clamping technology extends the AMF

product range.

2009  Development and marketing of AMF Vacuum clamping
technology.

2012  LOW-COST AUTOMATION gripping, clamping, marking

and cleaning.

2014  AMF presents the most extensive product range of automation

solution in zero-point clamping technology.

2017  Wireless sensoring systems extend the expertise into Industry 4.0

and blends seamlessly into the AMF product range.

Company Management:
Wolfgang Balle, Johannes Maier (CEO), Jürgen Förster

background image

Marking and cleaning tools

CATALOGUE 2017/2018

all sales are subject to our terms of sale, delivery, and payment. all rights for design, photographs and texts reserved by the publisher, aMF.
no photomechanical reproduction without our express permission. 2017/15en > WB 3.//04/2019 > Printed in germany.

Order no. 515429 ∙ € 2,40

AndrEAs MAiEr GmbH & Co. KG
Waiblinger Straße 116 ∙ D-70734 Fellbach
Phone:  +49 711 5766-0
Fax:

+49 711 575725

E-mail:  amf@amf.de
Web: www.amf.de

Marking and

cleaning tools

CATALOGUE 2017/2018

request additional catalogues from

www.amf.de

„ZEro-Point“
claMPing systeM

Hand tools

Hydraulic claMPing systeMs

Magnetic claMPing
systeMs

Modular Fixture systeMs

VacuuM claMPing systeMs

toggle claMPs

Pallet Feed systeMs

standard claMPing eleMents

griPPers

Marking and
cleaning tools

locks For gates and doors