Modular Mounting System, Überblick



Beschreibung
mess- und regeltechnik, armaturenfabrik franz schneider, as-schneider, armaturen, modular mounting systeme, sb-ventilblöcke für differenzdruck-messumformer, sm instrument-monoflansche, sb-ventilblöcke für druck-messumformer

background image

Instrumentation Products

Modular Mounting System

background image

Introduction

Introduction

Introduction

The AS-Schneider Group with its headquarters in Germany is one of the World‘s Leading Manufacturers of Instrumentation
Valves and Manifolds. AS-Schneider offers a large variety of Modular Mounting Systems and Accessories needed for the
instrumentation installations globally.

AS-Schneider's Modular Mounting System (MMS) provides substantial advantages by the simplest and most effective means to install Transmitters
and Gauges. The MMS Series are designed to be compatible with the Shell

®

MESC Specifications for Process Instrumentation.

The  MMS  Components  are  designed  to  be  used  with  Transmitters  or  Gauges  for  General  Pressure  and  Differential  Pressure  Measurements.
All  components benefit from a compact design, reduced installation costs and less potential leak points.

Instrument Monoflanges for both Vertical and
Horizontal Process Line Installations

Another important component is an Instru-
ment  Monoflange  (Shell  calls  it  Isolate/Vent
Gauge Block).

The MMS Components are Manifolds with a
Choice of Accessories like:

• Mounting Brackets
• Single and Double Vent Purge Blocks
• Seal Pots
• Steam & Electrical Heating
• Filling Connectors
• Blind Flanges
• Port Protectors
• Protective Shades and Enclosures
• Anti-Tamper Keys

2

AS-Schneider

Introduction

background image

Contents

Selection can be made from a comprehensive range of bodies with a variety of connections and material options, optimising installation and
access opportunities.

Continuous product development may from time to time necessitate changes in the details contained in this catalogue. AS-Schneider reserves
the right to make such changes at their discretion and without prior notice.

All dimensions shown in this catalogue are approximate and subject to change.

Introduction

|

page 2

Contents

|

page 3

General Features

|

page 4

Valve Head Units and Pressure-Temperature Ratings

|

page 5-6

SM Instrument Monoflanges

|

page 7-8

SB Manifolds

|

page 9-11

SAM Mounting Brackets

|

page 12

SVA Purge Blocks

|

page 13

SSB Seal Pots

|

page 14

SAS & SAE Heaters

|

page 15

SAF Filling Connectors

|

page 16

SAG Blind Flanges & Anti-Tamper Key

|

page 17

SAD Port Protectors & SAP Protective Shades and Enclosures

|

page 18

Cross Reference

|

page 19

3

www.as-schneider.com

Introduction

Contents

background image

General Features

Body Material Options

Material Group

AS Material
Designation

Material
No.

Short Name

Equivalent

UNS-No.

Material Grade

acc. to ASTM

Manifolds, Monoflan-
ges, Seal Pots, Filling
Connectors, Blind
Flanges and Port
Protectors

Mounting Brackets,
Steam Tracing Blocks
and Purge Blocks

Austenitic Stainless
Steel

316 quadruple
certified*

1.4401

X5CrNiMo17-12-2

S 31600

316

Standard

1.4404

X2CrNiMo17-12-2

S 31603

316L

Austenitic-Ferritic
Stainless Steel

Duplex

1.4462

X2CrNiMoN22-5-3

S 31803

F51

Optional

Not available

Nickel Based
Alloys

Alloy 400

2.4360

NiCu30Fe

N 04400

Alloy C-276

2.4819

NiMo 16 Cr 15 W

N 10276

• Bore Size  5 mm (0.197")

• Inlet and Vent Connection G 1/4 Female – DIN 3852-2

• Equalize and Vent Valves are equipped with an Anti-Tamper

Head Unit – Anti-Tamper Head Unit Options see Page 5

• Suitable for Liquid and Gas Service

• Fully Self-draining

Needle Seal:
PTFE and Graphite Packings are available for all valve types.

Sour Gas Service:
Wetted parts according to a.m. material list are supplied as
standard according to NACEMR0175/MR0103 and ISO 15156
(latest issue). However, valves in 316 and Duplex are equipped
with a needle in Alloy 400.

Pressure Test:
A shell test and a seat leakage test are performed at 1.5 times the
maximum working pressure acc. to EN 12266-1 - P10, P11 and
P12 respectively MSS-SP61 (and complies also with ASME B31.1
and B31.3) at every standard AS-Schneider Monoflange
g

100% Pressure Tested!

Certification:
Certified Mill Test Report (CMRT) as inspection certificate 3.1
acc. to EN 10 204 for valve body material and pressure test
available on request.

• Special Design to be used with Rosemount 2051/3051

Coplanar

TM

Flange Transmitters

• Wide Range of Exotic Materials on request

• Connections can be assembled with Tube Fittings

• Special Connections on request

• Wide Choice of Manifold Configurations to suit your application

Fugitive Emission Application:
For Fugitive Emission Applications AS-Schneider is providing
TA-Luft and ISO 15848 solutions. For more details see Page 6.

AS-Schneider offers an Option cleaned and lubricated for
Oxygen Service:

PTFE Packing – Max. Operating Pressure 420 bar (6,092 psi)

Pressure-Temperature Rating:
Max. 420 bar (6,092 psi) @ 60°C (140°F)
Max. 200°C (392°F) @ 90 bar (1,305 psi)

If you don't find your options in this catalogue, please
contact the factory.

* Quadruple Certified means 316 / 316L / 1.4401 / 1.4404

Standard Features

Optional Features

4

AS-Schneider

General Features

background image

Standard Valve Head Units

5

www.as-schneider.com

Standard Valve Head Units

Screwed Bonnet –  Needle Seal: Packing

Features

• Integral Valve Seat – Metal to metal seated
• Non-rotating Needle
• External Stem Thread – Packing below stem threads.

Stem threads are protected from process media
(non-wetted).

• Stem with Cold Rolled Threads
• Blow-out Proof Needle
• Back Seat – Metal to metal secondary needle seal
• Lock Pin – Eliminates unauthorized removal of the bonnet
• Color Coded Dust Cap for operating thread protection
• Standard Packing in PTFE and Graphite available
• Max. Operating Pressure 420 bar (6,092 psi)
• Anti-Tamper Valve Head Units for Equalize and Vent Valves
• All Non-wetted Parts in 316 Stainless Steel

Standard Needle Valves

St

an

d

ar

d: 5

7 (

2

.2

4"

) o

pe

n

T

A

-L

uf

t O

pt

io

n: 62 (

2

.4

4

") o

pe

n

Isolate Valve

Color Coded Dust Cap
For stem thread protection:

•  Isolate

blue

•  Vent / Test

red

•  Equalize

green

Color Coded Options
Following options are also color
coded below dust cap:

Graphite Packing

Oxygen Service

Components

Stainless Steel

Exotic Alloys

Material / Material No.

Body

316 / 316L

Alloy 400 Alloy C-276

Duplex

Bonnet

Needle

Plug

Packing

PTFE or Graphite

Valve Stem

316 / 316L

Gland

316

Stem Nut

316

Lock Nut

316

Set Screw

316

T Handle

316

Lock Pin

A4

Wetted components listed in bold .

Equalize and Vent Valve

Anti-Tamper Key
ATK-ES Type

65 (

2

.5

6"

)

General Features

background image

Fugitive Emission Applications and Pressure-Temperature Ratings

6

AS-Schneider

Fugitive Emission Applications and Pressure-Temperature Ratings

Features

•  Integral Valve Seat – Metal to metal seated
•  Non-rotating Needle
•  External Stem Thread – Packing below stem

threads. Stem threads are protected from
process media (non-wetted).

•  Stem with Cold Rolled Threads
•  Blow-out Proof Needle
•  Back Seat – Metal to metal secondary needle

seal

•  Lock Pin – Eliminates unauthorized removal

of the bonnet

•  Color Coded Dust Cap for operating thread

protection

•  Needle Seal:

Standard Packing in PTFE or Graphite plus
FKM O-Ring Needle Seal – RGD resistant
(RGD = Rapid Gas Decompression)

•  Max. Operating Pressure 420 bar (6,092 psi)
•  Anti-Tamper Valve Head Options available
•  All Non-wetted Parts in 316 Stainless Steel
•  Types also comply with the requirements of

TA-Luft 2002

ISO FE Performance Data

ISO FE Type 1:
Class A 1,500 cycles / –29°C to     40°C

(–20°F    to 104°F)

Class A      500 cycles /  –29°C      to 200°C

(–20°F       to 392°F)

Class B  1,500 cycles /   –29°C      to 200°C

(–20°F       to 392°F)

ISO FE Type 3:
Class B  1,500 cycles /  –29°C      to 200°C

(–20°F       to 392°F)

Needle Valves acc. to ISO 15848

Screwed Bonnet –  Type 1 O-Ring Needle Seal + Graphite Packing
Type 3 PTFE Packing

8

6 (

3.

39

") o

pe

n

Packing adjustment may be required during the

service life of the valves.

Valves that have not been cycled for a period of

time may have a higher initial actuation torque.

Pressure-Temperature Rating - Standard Valves

Pressure-Temperature Rating - Valves acc. to ISO 15848

background image

SM Instrument Monoflanges

Fugitive Emission Applications and Pressure-Temperature Ratings

7

www.as-schneider.com

SM Instrument Monoflanges

SM Instrument Monoflanges

The SM Instrument Monoflanges are Isolate / Vent Gauge Blocks for Pressure Gauges or Transmitters using screwed connections.
The Gauge Connection is equipped with a Swivel Gauge Adaptor which enables the easy positioning of the gauge in any direction
through 360°. It is suitable for Horizontal or Vertical Flange Mounting and can be assembled directly to the Primary Isolation Valve.

Pressure-Temperature Rating acc. to Shell MESC

Maximum Working Pressure:
100 bar (1,450 psi) @ 38°C (100.4°F) (LPR 150 – 600 lbs)
413 bar (6,000 psi) @ 38°C (100.4°F) (HPR 900 – 2,500 lbs)

Maximum Working Temperature: 200°C (392°F)

Connections

Instrument:
Swivel  Gauge  Adaptor  with  1/2  NPT  and  G  1/2  Female
Threads available. It can be supplied as an Integral Syphon
Type.

Process:
1/2" Flange acc. to ASME B16.5
Available as LPR (150 – 600 lbs) and
HPR (900 – 2,500 lbs) RF Smooth Finish

Vent:
G 1/4 Female
Can be equipped with Compression Fittings

MESC Code

Description

Vent

Part Number

MESC 60.98.55.200.1

Instrument Monoflange 1/2" 150 – 600      Type G

G 1/4-F

SMA-GLN-SG00

MESC 60.98.55.210.1

Instrument Monoflange 1/2" 900 – 2,500   Type G

G 1/4-F

SMA-GHN-SG00

MESC 60.98.55.220.1

Instrument Monoflange 1/2" 150 – 600      Type G

G 1/4-F

SMA-GLG-SG00

MESC 60.98.55.230.1

Instrument Monoflange 1/2" 900 – 2,500   Type G

G 1/4-F

SMA-GHG-SG00

MESC 60.98.55.300.1

Instrument Monoflange 1/2" 150 – 600      Type S

G 1/4-F

SMA-SLN-SG00

MESC 60.98.55.310.1

Instrument Monoflange 1/2" 900 – 2,500   Type S

G 1/4-F

SMA-SHN-SG00

MESC 60.98.55.320.1

Instrument Monoflange 1/2" 150 – 600      Type S

G 1/4-F

SMA-SLG-SG00

MESC 60.98.55.330.1

Instrument Monoflange 1/2" 900 – 2,500   Type S

G 1/4-F

SMA-SHG-SG00

Ordering Code - Standard Monoflanges

Instrument Monoflange
Type G

Instrument Monoflange
Type S

Fugitive Emission Applications and Pressure-Temperature Ratings

background image

SM Instrument Monoflanges

Ordering Information

1

2

3

4

5

6

7

8

9

10

11

12

13

14

S

M

A

-

G

L

G

-

S

G

0

0

Instrument Monoflanges

Packing

A

PTFE

B

Graphite

L

ISO FE Series Type 1

N

ISO FE Series Type 3

Type

G

Swivel Gauge Adaptor

S

Swivel Gauge Adaptor with Integral Syphon

Pressure Rating

L

LPR (150, 300, 600 lbs)

H

HPR (900, 1,500, 2,500 lbs)

Thread

G

G 1/2 Female

N

1/2 NPT Female

Material

S

1.4401 / 1.4404 / 316 / 316L

H

Alloy C-276 UNS N10276

M

Alloy 400 UNS N04400

F

Duplex UNS S31803

Vent Connection

G

G 1/4 Female

B

1/4 NPT Female

Compression Fitting

0

Without Compression Fitting

A

A-Lok

®

R

Rotarex

S

Swagelok

®

Size of Compression Fitting

0

Without Compression Fitting

3

10 mm

4

12 mm

8

3/8"

9

1/2"

Options (if available)

B

Oxygen Service

N

NACE / Sour Gas Service (Needle in Alloy 400)*

T

Anti-Tamper Key

Additional Options (if available)

0

No additional Option

* 316 SST Type includes NACE Option with Needle in 316 SST - Does not correspond to Shell MESC Spec.

8

AS-Schneider

SM Instrument Monoflanges

background image

SB Manifolds

9

www.as-schneider.com

SB Manifolds

SB Manifolds

The SB Manifold can be assembled directly to a Standard Mounting Plate, eliminating the need for extra Mounting Accessories and
reducing pipe work on site. The SB Manifolds can also be supplied with a wide Choice of Accessories.

Pressure-Temperature Rating acc. to Shell MESC:
Maximum Working Pressure: DIN 19213 400 bar (5,801 psi) @ 38°C (100.4°F)

IEC 61518   413  bar (6,000 psi) @ 38°C (100.4°F)

Maximum Working Temperature: 200°C (392°F)

SB Manifolds for Differential Pressure Transmitters

Connections

Instrument – Flange Connection acc. to:
•  DIN 19213 part 2 rev. 1980
•  DN EN 61518 Type A
•  Rosemount 2051/3051 Coplanar

TM

Pressure Transmitter

(not specified in Shell MESC)

Type

MESC Code

Description

Vent

Part Number

A

MESC 60.98.56.205.1

4 Valve Manifold
For general applications.

10 mm*

SBA-AA0-SG*3

MESC 60.98.56.207.1

3/8"*

SBA-AA0-SG*8

B

MESC 60.98.56.215.1

4 Valve Manifold
For applications where contamination of process
stream is not permitted.

10 mm*

SBA-BA0-SG*3

MESC 60.98.56.217.1

3/8"*

SBA-BA0-SG*8

C

MESC 60.98.56.225.1

2 Valve Manifold
For pressure applications and level measurements
on atmospheric tanks.

10 mm*

SBA-CA0-SG*3

MESC 60.98.56.227.1

3/8"*

SBA-CA0-SG*8

K

Not specified in Shell
MESC

5 Valve Manifold
With Natural Gas Metering Pattern.

10 mm*

SBA-KA0-SB*3

3/8"*

SBA-KA0-SB*8

Ordering Code – Different Types for Different Applications

* Compression Fitting - make, type, size and composition as specified in the requisition/indent.

4 Valve Manifold – Type A
Double Isolate/Equalize/Vent Block

4 Valve Manifold – Type B
Double Isolate/Double Vent Block

2 Valve Manifold – Type C
Single Isolate/Vent Block

5 Valve Manifold – Type K
Double Isolate/Double Equalize/Vent Block

Process:
G 1/4 Female, 1/4 NPT or 1/2 NPT Female

Vent:
G 1/4 Female or 1/4 NPT Female

background image

10

AS-Schneider

SB Manifolds

SB Manifolds

SB Manifolds for Pressure Transmitters

Type

MESC Code

Description

Vent

Part Number

D

MESC 60.98.56.235.1

2 Valve Manifold
For pressure transmitters of the differential

body design.

10 mm*

SBA-DA0-SG*3

MESC 60.98.56.237.1

3/8"*

SBA-DA0-SG*8

E

MESC 60.98.56.305.1

2 Valve Manifold
For pressure transmitters with 1/2 NPT Female
connection.

10 mm*

SBA-EA0-SG*3

MESC 60.98.56.325.1

3/8"*

SBA-EA0-SG*8

F

MESC 60.98.56.315.1

2 Valve Manifold
For pressure transmitters with 1/2 NPT Male

connection.

10 mm*

SBA-FA0-SG*3

MESC 60.98.56.335.1

3/8"*

SBA-FA0-SG*8

G

MESC 60.98.56.317.1

2 Valve Manifold
For pressure transmitters with G 1/2 Male

(1/2 BSP P) connection.

10 mm*

SBA-GA0-SG*3

MESC 60.98.56.337.1

3/8"*

SBA-GA0-SG*8

Ordering Code – Different Types for Different Applications

* Compression Fitting - make, type, size and composition as specified in the requisition/indent.

2 Valve Manifold – Type D
Single Isolate/Vent Block
Flange Connection DIN 19213

2 Valve Manifold – Type E
Single Isolate/Vent Block
Swivel Gauge Adaptor 1/2 NPT Male

2 Valve Manifold – Type F
Single Isolate/Vent Block
Swivel Gauge Adaptor 1/2 NPT Female

2 Valve Manifold – Type G
Single Isolate/Vent Block
Swivel Gauge Adaptor G 1/2 Female

Connections

Instrument:
Flange Connection acc. to:
•  DIN 19213 part 2 rev. 1980
•  DN EN 61518 Form A
•  Rosemount 2051/3051 Coplanar

TM

Pressure Transmitter

(not specified in Shell MESC)

or Swivel Gauge Connector 1/2 NPT resp. G1/2

Process:
G 1/4 Female, 1/4 NPT or 1/2 NPT Female

Vent:
G 1/4 Female or 1/4 NPT Female

Swivel Gauge Adaptor
1/2 NPT Male
1/2 NPT Female and
G 1/2 (1/2" BSP P) Female

background image

Ordering Information

1

2

3

4

5

6

7

8

9

10

11

12

13

14

S

B

A

-

A

A

0

-

S

G

R

3

Manifolds

Packing

A

PTFE

B

Graphite (only if field 6 = C)

L

ISO FE Series Type 1

N

ISO FE Series Type 3

Type

A

Double Isolate / Equalize / Vent (General)

B

Double Isolate / Vent (Anti-Contamination)

C

Single Isolate / Vent (DP)

D

Single Isolate / Vent (Pressure, DP Design)

E

Single Isolate / Vent (1/2 NPT Male)

F

Single Isolate / Vent (1/2 NPT Female)

G

Single Isolate / Vent (G 1/2 Female)

K

Double Isolate / Double Equalize / Vent Block (5 Valve Manifold)

Transmitter Connection*

1

A

DIN 19213 Part 2 rev. 1980 or Threaded

B

Integral Style for Rosemount 2051/3051 Coplanar

TM

Pressure Transmitter (Type A, B, C and D only)

C

DIN EN / IEC 61518 - Type A

Material

S

1.4401 / 1.4404 / 316 / 316L

H

Alloy C-276 UNS N10276

M

Alloy 400 UNS N04400

F

Duplex UNS S31803

Process / Vent Connection

G

G 1/4 Female / G 1/4 Female

B

1/2 NPT Female / 1/4 NPT Female

C

1/4 NPT Female / 1/4 NPT Female

Compression Fitting

0

Without Compression Fitting

A

A-Lok

®

R

Rotarex

S

Swagelok

®

Size of Compression Fitting

0

Without Compression Fitting

3

10 mm

4

12 mm

8

3/8"

9

1/2"

Options (if available)

B

Oxygen Service

N

NACE / Sour Gas Service (Needle in Alloy 400)*

2

T

Anti-Tamper Key

Additional Options (if available)

0

No additional Option

*

1

Transmitter Connection:

A) DIN 19213: Type A, B, C, D and K are supplied with SST Hexagon Cap Screws 7/16-20 UNF x 1 1/2" and PTFE Seal Ring.
B) Integral Style: No Bolts and Seal Rings are provided.
C) DIN EN / IEC 61518 Type A: Type A, B C, D and K are supplied with SST Hexagon Cap Screws 7/16-20 UNF x 1 1/2" and Graphite Seal Ring, Packing is also Graphite.

Alternatively with PTFE Seal Ring if Packing is also PTFE - This Option is not specified in Shell MESC.

*

2

316 SST Type includes NACE Option with Needle in 316 SST - Does not correspond to Shell MESC Spec.

11

www.as-schneider.com

SB Manifolds

SB Manifolds

SB Manifolds

background image

12

AS-Schneider

SAM Mounting Brackets

SAM Mounting Brackets

SAM Mounting Brackets

The SAM Mounting Brackets are designed to ensure a Simple and Quick Installation of Manifolds with other Accessories including the
Nameplate. There are four different types of Mounting Brackets available. The Brackets are made of 316 SST and are designed to be
assembled to a 2" Pipestand. Type A is used, if a Protective Shade is required.

SAM-A1

SAM-A2

SAM-B1

SAM-B2

MESC Code

Standard Drawing

Description

Part Number

MESC 60.98.91.105.1

37.813

Mounting Bracket A1

SAM-A1

MESC 60.98.91.110.1

37.815

Mounting Bracket A2

SAM-A2

MESC 60.98.91.118.1

37.814

Mounting Bracket B1

SAM-B1

MESC 60.98.91.120.1

37.816

Mounting Bracket B2

SAM-B2

37.601

Stainless Steel Tag Plate

SAC-S00

Ordering Code

background image

13

www.as-schneider.com

SVA Purge Blocks

SVA Purge Blocks

SVA Purge Blocks

The SVA Purge Blocks have two main Applications:

1. Application:
Purge protection of the instrument using a purge medium to keep the process away from the instrument by maintaining a higher
pressure than the process medium.

2. Application:
To provide a sensing medium for differential pressure instruments on level indication services.

There are two Vent Purge Blocks available, the Double Vent Purge Block SVA-D for differential pressure application and the Single
Vent Purge Block SVA-S for static pressure applications.

Pressure-Temperature Rating acc. to Shell MESC

Maximum Working Pressure:
413 bar (6,000 psi) @ 38°C (100.4°F)

Maximum Working Temperature:
• 200°C (392°F) for PTFE Packing and ISO FE Series Option
• 550°C (1,022°F) for Graphite Packing

(not specified in Shell MESC)

Connections

Outlets:
Are equipped with Soft Seated Check Valves

Inlet:
Is provided with an Integral Filter

MESC Code

Description

Vent

Part Number

Ordering Code, Field 3 & 9 – 14

MESC 60.98.70.210.1

Single Vent Purge Block
Type S

10 mm*

SVA-S00-SG*3

See Page 11.

MESC 60.98.70.310.1

3/8"*

SVA-S00-SG*8

MESC 60.98.70.220.1

Double Vent Purge Block
Type D

10 mm*

SVA-D00-SG*3

MESC 60.98.70.320.1

3/8"*

SVA-D00-SG*8

Ordering Code

* Compression Fitting - make, type, size and composition as specified in the requisition/indent.

SVA-S00-SGS3
Single

SVA-D00-SGS3
Double

Outlet Outlet

Vent

Inlet

Outlet

Vent

Inlet

SAM Mounting Brackets

background image

Ordering Information

1

2

3

4

5

6

7

8

9

10

11

12

13

14

S

S

B

-

0

0

0

-

S

G

R

3

S

A

S

Material

S

1.4401 / 1.4404 / 316 / 316L

H

Alloy C-276 UNS N10276

M

Alloy 400 UNS N04400

F

Duplex UNS S31803

Process / Vent Connection

G

G 1/4 Female / G 1/4 Female

C

1/4 NPT Female / 1/4 NPT Female

Compression Fitting

0

Without Compression Fitting

A

A-Lok

®

R

Rotarex

S

Swagelok

®

Size of Compression Fitting

0

Without Compression Fitting

3

10 mm

4

12 mm

8

3/8"

9

1/2"

Options (if available)

B

Oxygen Service

N

NACE / Sour Gas Service (Needle in Alloy 400)*

T

Anti-Tamper Key

Additional Options (if available)

0

No additional Option

* 316 SST Type includes NACE Option with Needle in 316 SST - Does not correspond to Shell MESC Spec.

14

AS-Schneider

SSB Seal Pots

SSB Seal Pots

SSB Seal Pots

The SSB Seal Pots are used for systems requiring an open seal such as high temperature, toxic or
corrosive service. The Seal Pots are used with an Immiscible Seal Fluid. The difference in density
to the process media will provide a barrier in front of the Manifold and Instrument.

Pressure-Temperature Rating
acc. to Shell MESC

Maximum Working Pressure:
413 bar (6,000 psi) @ 38°C (100.4°F)

Maximum Working Temperature:
450°C (842°F)

Volume

Approx. 50 cm³

Location

Seal Pot is located below the Orifice Plate: A Seal Fluid with higher specific gravity than the

Process Medium is to be used.

Seal Pot is located above the Orifice Plate: A Seal Fluid with lower specific gravity is to be used.

MESC Code

Description

Vent

Part Number

MESC 60.98.70.510.1

Seal Pot

10 mm*

SSB-000-SG*3

MESC 60.98.70.600.1

1/2"*

SSB-000-SG*9

MESC 60.98.70.610.1

3/8"*

SSB-000-SG*8

Ordering Code

* Compression Fitting - make, type, size and composition as specified in the requisition/indent.

background image

15

www.as-schneider.com

SAS & SAE Heaters

SAS & SAE Heaters

SAS & SAE Heaters

The SAS Steam Tracing Blocks & SAE Electrical Heaters are used to provide Frost Protection and to maintain Process Temperatures
given that the heaters are mounted directly to the Manifold which ensures efficient Heat Transfer to the Manifold and Transmitter
Body.

SAS Steam Tracing Blocks

Steam Tracing is provided through a separate Stainless Steel Block which is mounted
directly to the Manifold with one Stainless Steel M8 Mounting Bolt.

The  Connection  to  the  Steam  Line  is  provided  by  two  G  1/4  Female  Ports  equipped
with Tube Fittings.

SAE Electrical Heater

Conduction Heater with self-limiting output characteristic, supplied with cable length
of 1m. Is directly mounted to the Manifold with one Stainless Steel M8 Mounting Bolt.

Material: Aluminium (sea water resistant)
Size: 90 x 40 x 30mm
Voltage: 110V – 265V
Rating: 50W
Type of Protection: IP68, NEMA 4X
Explosion Proof: II 2 GD EEx d IIC T4
Certificate No. (PTB): 02 ATEX 1116 X

MESC Code

Description

Vent

Part Number

Ordering Code, Field 4 – 14

MESC 60.98.70.010.1

Steam Tracing Block

10 mm*

SAS-000-SG*3

See Page 14.

MESC 60.98.70.110.1

3/8"*

SAS-000-SG*8

MESC 60.98.70.050.1

Electrical Heater

SAE

Ordering Code

* Compression Fitting - make, type, size and composition as specified in the requisition/indent.

SAS Steam Tracing Blocks –
Pressure-Temperature Rating acc. to Shell MESC

Maximum Working Pressure:
20 bar (290 psi) @ 210°C (410°F)

Maximum Working Temperature:
220°C (428°F)

SSB Seal Pots

background image

16

AS-Schneider

SAF Filling Connectors

SAF Filling Connectors

Ordering Information

Pressure-Temperature Rating
acc. to Shell MESC

Maximum Working Pressure:
DIN 19213 400 bar (5,801 psi) @ 38°C (100.4°F)
IEC 61518  413    bar (6,000 psi) @ 38°C (100.4°F)

Maximum Working Temperature:
200°C (392°F)

MESC Code

Description

Part Number

MESC 60.98.90.106.1

Filling Connector 6 mm

SAF-A00-SP*1

MESC 60.98.90.107.1

Filling Connector 1/4"

SAF-A00-SP*7

Ordering Code

* Compression Fitting - make, type, size and composition as specified in the requisition/

indent.

SAF Filling Connectors

The SAF Filling Connectors are used if purge protection is required but no purge
block is installed. The Filling Connector allows the system to be filled with Purge
Medium  through  the  instrument  cavities.  The  Filling  Connector  has  an  integral
Check Valve and is available with different connections.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

S

A

F

-

A

0

0

-

S

P

R

1

Filling Connectors

Seal Ring Material*

A

PTFE

B

Graphite

Material Connector

S

1.4401 / 1.4404 / 316 / 316L

H

Alloy C-276 UNS N10276

M

Alloy 400 UNS N04400

F

Duplex UNS S31803

Connection

P

Cap with Chain

Connection Type

A

A-Lok

®

R

Rotarex

S

Swagelok

®

Size of Connection

1

6 mm

7

1/4"

Options (if available)

B

Oxygen Service

N

NACE / Sour Gas Service

Additional Options (if available)

0

No additional Option

* SAF is supplied with SST Hexagon Cap Screws 7/16-20 UNF x 1 1/2" and PTFE Seal Ring as standard. Flange Connection acc. to DIN 19213.

If a Graphite Seal Ring is specified, the Flange Connection will be acc. to DIN EN/IEC 61518 Type A.

background image

17

www.as-schneider.com

SAG Blind Flanges & Anti-Tamper Key

SAG Blind Flanges & Anti-Tamper Key

SAG Blind Flanges

The  Blind  Flange  enables  standard  instrument  flange  connections  to  be
blanked off as required.

Ordering Information

1

2

3

4

5

6

7

8

9

10

11

12

13

14

S

A

G

-

A

0

0

-

S

0

0

0

Blind Flanges

Seal Ring Material*

A

PTFE

B

Graphite

Material

S

1.4401 / 1.4404 / 316 / 316L

H

Alloy C-276 UNS N10276

M

Alloy 400 UNS N04400

F

Duplex UNS S31803

Options (if available)

B

Oxygen Service

N

NACE / Sour Gas Service

Additional Options (if available)

0

No additional Option

* SAG is supplied with SST Hexagon Cap Screws 7/16-20 UNF x 1 1/2" and PTFE Seal Ring as standard. Flange Connection acc. to DIN 19213.

If a Graphite Seal Ring is specified, the Flange Connection will be acc. to DIN EN/IEC 61518 Type A.

Anti-Tamper Key

Removable  Anti-Tamper  Key  to  operate  the  Anti-Tamper  Vent
Valves.

Part Number ATK-ES

SAF Filling Connectors

background image

18

AS-Schneider

Cross Reference

SAD Port Protectors & SAP Protective Shades and Enclosures

SAD Port Protectors & SAP Protective Shades and Enclosures

Protective Shade
SAP-PA0

Protective Shade
SAP-PS0

Enclosure
SAP-EA0

SAD Port Protectors

The  Port  Protectors  prevent  the  ingress  of
Bugs and Dirt.

Ordering Information

1

2

3

4

5

6

7

8

9

S

A

D

-

G

2

0

-

S

Port Protectors

Thread Type

G

G

N

NPT

Thread Size

2

1/4

4

1/2

Material

S

1.4401 / 1.4404 / 316 / 316L

H

Alloy C-276 UNS N10276

M

Alloy 400 UNS N04400

F

Duplex UNS S31803

SAP Protective Shades and Enclosures

The SAP-P Protective Shades were designed to
protect  the  Instrument  from  Heavy  Rain  and
Intensive Sunlight.

The Enclosures provide a Complete Environ-
mental  Protection  of  the  Manifold  and  the
Instrument Body. They are mainly used if the
System is exposed to Low Temperatures.

MESC Code

Description

Part Number

MESC 60.98.91.205.1

Protective Shade G.R.P. Antistatic SAP-PA0

Protective Shade SST

SAP-PS0

MESC 60.98.91.305.1

Enclosure G.R.P. Antistatic

SAP-EA0

Ordering Code

background image

19

www.as-schneider.com

Cross Reference

Cross Reference

MESC Code

Description

Vent

Part Number

Page

MESC 60.98.55.200.1

Instrument Monoflange 1/2" 150-600 Type G

G 1/4-F

SMA-GLN-SG00

7-8

MESC 60.98.55.210.1

Instrument Monoflange 1/2" 900-2,500 Type G

G 1/4-F

SMA-GHN-SG00

MESC 60.98.55.220.1

Instrument Monoflange 1/2" 150-600 Type G

G 1/4-F

SMA-GLG-SG00

MESC 60.98.55.230.1

Instrument Monoflange 1/2" 900-2,500 Type G

G 1/4-F

SMA-GHG-SG00

MESC 60.98.55.300.1

Instrument Monoflange 1/2" 150-600 Type S

G 1/4-F

SMA-SLN-SG00

MESC 60.98.55.310.1

Instrument Monoflange 1/2" 900-2,500 Type S

G 1/4-F

SMA-SHN-SG00

MESC 60.98.55.320.1

Instrument Monoflange 1/2" 150-600 Type S

G 1/4-F

SMA-SLG-SG00

MESC 60.98.55.330.1

Instrument Monoflange 1/2" 900-2,500 Type S

G 1/4-F

SMA-SHG-SG00

MESC 60.98.56.205.1

4 Valve Manifold Type A

10 mm*

SBA-AA0-SG*3

9-11

MESC 60.98.56.207.1

3/8"*

SBA-AA0-SG*8

MESC 60.98.56.215.1

4 Valve Manifold Type B

10 mm*

SBA-BA0-SG*3

MESC 60.98.56.217.1

3/8"*

SBA-BA0-SG*8

MESC 60.98.56.225.1

2 Valve Manifold Type C

10 mm*

SBA-CA0-SG*3

MESC 60.98.56.227.1

3/8"*

SBA-CA0-SG*8

MESC 60.98.56.235.1

2 Valve Manifold Type D

10 mm*

SBA-DA0-SG*3

MESC 60.98.56.237.1

3/8"*

SBA-DA0-SG*8

MESC 60.98.56.305.1

2 Valve Manifold Type E

10 mm*

SBA-EA0-SG*3

MESC 60.98.56.325.1

3/8"*

SBA-EA0-SG*8

MESC 60.98.56.315.1

2 Valve Manifold Type F

10 mm*

SBA-FA0-SG*3

MESC 60.98.56.335.1

3/8"*

SBA-FA0-SG*8

MESC 60.98.56.317.1

2 Valve Manifold Type G

10 mm*

SBA-GA0-SG*3

MESC 60.98.56.337.1

3/8"*

SBA-GA0-SG*8

MESC 60.98.91.105.1

Mounting Bracket A1

SAM-A1

12

MESC 60.98.91.110.1

Mounting Bracket A2

SAM-A2

MESC 60.98.91.118.1

Mounting Bracket B1

SAM-B1

MESC 60.98.91.120.1

Mounting Bracket B2

SAM-B2

MESC 60.98.70.210.1

Single Vent Purge Block Type S

10 mm*

SVA-S00-SG*3

13

MESC 60.98.70.310.1

3/8"*

SVA-S00-SG*8

MESC 60.98.70.220.1

Double Vent Purge Block Type D

10 mm*

SVA-D00-SG*3

MESC 60.98.70.320.1

3/8"*

SVA-D00-SG*8

MESC 60.98.70.510.1

Seal Pot

10 mm*

SSB-000-SG*3

14

MESC 60.98.70.600.1

1/2"*

SSB-000-SG*9

MESC 60.98.70.610.1

3/8"*

SSB-000-SG*8

MESC 60.98.70.010.1

Steam Tracing Block

10 mm*

SAS-000-SG*3

15

MESC 60.98.70.110.1

3/8"*

SAS-000-SG*8

MESC 60.98.70.050.1

Electrical Heater

SAE

MESC 60.98.90.106.1

Filling Connector 6 mm

SAF-A00-SP*1

16

MESC 60.98.90.107.1

Filling Connector 1/4"

SAF-A00-SP*7

Blind Flange

SAG-A00-S000

17

Anti-Tamper Key

ATK-ES

Port Protector

SAD-G20-S

18

MESC 60.98.91.205.1

Protective Shade G.R.P. Antistatic

SAP-PA0

Protective Shade SST

SAP-PS0

MESC 60.98.91.305.1

Enclosure G.R.P. Antistatic

SAP-EA0

Cross Reference –
Referring to the Global MESC Code

* Compression Fitting - Make, type, size and composition as specified in the requisition/indent.

background image

AS-3601-EN | September 2015

Tel: +49 7133 101-0

Fax: +49 7133 101-148

www.as-schneider.com

Armaturenfabrik Franz Schneider
GmbH + Co. KG

Bahnhofplatz 12 I 74226 Nordheim
Deutschland / Germany

Tel: +65 62 51 39 00

Fax: +65 62 51 39 90

www.as-schneider.sg

AS-Schneider Asia-Pacific Pte. Ltd.

970 Toa Payoh North, #02-12/14/15
Singapore 318992

Tel: +40 368 41 40 25
Fax: +40 368 41 40 26

www.as-schneider.ro

Armaturenfabrik Franz Schneider SRL

Sales Office:
Str. Basarabilor, Nr. 7 I 100036 Ploiesti
Romania

Tel: +971 4 880 85 75

Fax: +971 4 880 85 76

www.as-schneider.ae

AS-Schneider Middle East FZE

P.O. Box 18749 I Dubai
United Arab Emirates

AS-Schneider America, Inc.

17471 Village Green Dr I Houston, TX 77040
United States of America

Production Plant:
Str. Mihai Viteazu, Nr. 327i I 507085 Harman
Jud. Bra

ş ov I Romania

Tel: +40 244 384 963
Fax: +40 244 384 963

Tel: +1 281 2 58 42 63

Fax: +1 281 5 06 79 35

www.as-schneider.com