Monoflansche und VariAS-Blöcke, Überblick



Beschreibung
armaturenfabrik franz schneider, as-schneider, armaturen, gewinde x flansche, prozess-monoflansche, instrument-monoflansche, monoflansche und varias-blöcke

background image

Instrumentation Products

Monoflanges and VariAS-Blocks

background image

Introduction

Introduction

The AS-Schneider Group with its headquarters in Germany is one of the World's
Leading Manufacturers of Instrumentation Valves and Manifolds. AS-Schneider offers
a large variety of Monoflanges, VariAS-Blocks and Accessories needed for the instru-
mentation installations globally.

The  AS-Schneider  Monoflanges  and  VariAS-Blocks  are  designed  to  overcome  the  problems  of
traditional assemblies on primary isolation duties. By combining piping and instrument valves in a
single assembly, they provide weight and space savings, along with other benefits including reduced
potential leak points and safer hook-up. This more compact and efficient arrangement reduces not
only pipework vibration and associated stress but also installation and maintenance costs.

Selection can be made from a comprehensive range of bodies with a variety of connections and
material options, optimising installation and access opportunities. Many of the valves shown in this
catalogue are available from stock or within a short period of time. The dimensions shown in this
catalogue  apply  to  standard  types.  If  you  need  the  dimensions  for  your  individual  type  please
contact the factory.

Continuous product development may from time to time necessitate changes in the details contained
in  this  catalogue.  AS-Schneider  reserves  the  right  to  make  such  changes  at  their  discretion  and
without prior notice.

All dimensions shown in this catalogue are approximate and subject to change.

Introduction

Conventional

Solution

VariAS-Block

Monoflange

2

AS-Schneider

Introduction

background image

Contents

Introduction

|

page 2

Contents

|

page 3

M

o

nofl

an

ge

s

Product Description, General Features

|

page 4-5

Valve Head Units

|

page 6-9

Options

|

page 10-11

Assemblies

|

page 12

Weights and Dimensions

|

page 13-14

Ordering Information

|

page 15

V

ariA

S

-B

lo

ck

s

Product Description, General Features

|

page 16-17

Standard Valve Designs

|

page 18

Fugitive Emission Application Designs

|

page 19

Pressure Ratings, Codes and Specifications

|

page 20

Options

|

page 21

Injection and Sampling Applications

|

page 22

Weights and Dimensions

|

page 23-24

Ordering Information

|

page 25

Accessories for Monoflanges and VariAS-Blocks

|

page 26

DB&B Pipeline Ball Valves - Taurus Series

|

page 27

3

www.as-schneider.com

Contents

Introduction

background image

4

AS-Schneider

Monoflanges

Monoflanges

Monoflanges

AS-Schneider Monoflanges are designed to replace conventional mutiple-valve installations currently in use for interface with pressure
measuring systems. By combining customer specified valves into a single manifold, the number of leak paths is considerably reduced
and the mass of the system is lowered reducing the stresses from loading and vibration. The AS-Schneider Monoflange Series are
available as Process Monoflanges and Intrument Monoflanges.

Process Monoflanges
Process Monoflanges are designed to replace the traditional primary
isolation  valve,  the  primary  isolation  valve  (OS & Y  bolted  bonnet)
incorporates a primary isolate piping valve combined with instrument
double block & bleed functions.

Instrument Monoflanges
Instrument  Monoflanges  work  in  conjunction  with  a  pre-installed
primary valve to provide a compact instrument block and bleed valve
or are used when primary valves with an OS & Y bolted bonnet are
not required.

Block
1st Isolate: OS & Y

Block & Bleed
1st Isolate: Needle
Vent: Needle

Block
1st Isolate: Needle

Block & Bleed
1st Isolate: OS & Y
Vent: Needle

Double Block &
Bleed
1st Isolate: OS & Y
2nd Isolate: Needle
Vent: Needle

Double Block & Bleed
1st Isolate: Needle
2nd Isolate: Needle
Vent: Needle

background image

5

www.as-schneider.com

Body Material Options

Material Group

AS Material
Designation

Material
No.

Short Name

Equivalent

UNS-No.

Material Grade

acc. to ASTM

Monoflanges

Carbon Steel

A105

A105

Optional

LF2

LF2

Optional

Austenitic Stainless
Steel

316 quadruple
certified*

1.4401

X5CrNiMo17-12-2

S 31600

316

Standard

1.4404

X2CrNiMo17-12-2

S 31603

316L

Standard

6Mo

1.4547

X 1CrNiMoCuN20-18-7

S 31254

Standard

Austenitic-Ferritic
Stainless Steel

Duplex

1.4462

X2CrNiMoN22-5-3

S 31803

F51

Standard

Superduplex

1.4410

X2CrNiMoN25.7.4

S 32750

F53

Standard

1.4501

X2CrNiMoCuWN25.7.4

S 32760

F55

Optional

Nickel Based
Alloys

Alloy 400

2.4360

NiCu30Fe

N 04400

Standard

Alloy C-276

2.4819

NiMo 16 Cr 15 W

N 10276

Standard

Alloy 625

2.4856

NiCr22Mo9Nb

N 06625

Standard

Alloy 825

2.4858

NiCr21Mo

N 08825

Optional

• Bore Size 5 mm (0.197")

• ASME B16.5 Flange Connections

Flange Size 1/2" to 3" (DN15 to DN80)
Flange Class 150 to 2,500

• Outlet Connection 1/2 NPT Female

• Vent Connection 1/4 NPT Female

• Vent Valve with Anti-Tamper Head Unit incl. AT-Key.

Anti-Tamper Head Unit Options see Page 9.

• Fire Safe Tested according to ISO 10497 / API 607 – OS&Y

Bolted Bonnet and Graphite Packing, see also Page 7.

Needle Seal:
PTFE and Graphite Packings are available for all valve types.

Sour Gas Service:
Wetted parts according to a.m. material list are supplied as
standard according to NACEMR0175/MR0103 and ISO 15156
(latest issue).

Pressure Test:
A shell test and a seat leakage test are performed at 1.5 times the
maximum working pressure acc. to EN 12266-1 – P10, P11 and
P12 respectively MSS-SP61 (and complies also with ASME B31.1
and B31.3) at every standard AS-Schneider Monoflange
g

100% Pressure Tested!

Certification:
Certified Mill Test Report (CMRT) as inspection certificate 3.1
acc. to EN 10 204 for valve body material and pressure test
available on request.

• API Flange Connections (up to 689 bar [10,000 psi])

• EN 1092-1 Flange Connections

• Needle Seal with FKM O-Ring and Bellows Sealed Head Units

• Choices of Needle Tip Materials such as Stellite and Soft Tips

• Swivel Gauge Connections – Integral Type and as Accessory,

see also Page 26

• Pressure Tested according to API 598

Fugitive Emission Application:
For Fugitive Emission Applications AS-Schneider is providing
TA-Luft and ISO 15848 solutions. For more details see Page 8.

Oxygen Service:
AS-Schneider offers an option with PTFE Packing cleaned and
lubricated for Oxygen Service:

Pressure-Temperature Rating:
Max. 420 bar (6,092 psi) @ 60°C (140°F)
Max. 200°C (392°F) @ 90 bar (1,305 psi)

Not every Valve Type is available for Oxygen Service!

If you don't find your options in this catalogue, please
contact the factory.

*  Quadruple Certified means 316 / 316L / 1.4401 / 1.4404

Standard Features

Optional Features

Note:

Starting from 1 1/2'' Class

900 / 1,500 the Valve

Head Units are 45° angled

for convenient

operation!

Monoflanges I General Features

Monoflanges

Monoflanges I General Features

background image

Standard Valve Head Units

6

AS-Schneider

Standard Valve Head Units

Components

Carbon Steel

Stainless Steel

Exotic Alloys

Material / Material No.

Body

A 105 resp.

LF2

316 / 316L

Alloy 400 Alloy C-276

Duplex UNS S32750 Alloy 625

6Mo

Bonnet

316 / 316L

Needle

Pipe Plug

Valve Stem

316 / 316L

Gland

316

Packing

PTFE or Graphite

Stem Nut/Yoke

316

Lock Nut

316

Set Screw

316

T Handle

316

Lock Pin

A4 (316)

Screwed Bonnet –  Needle Seal: Packing

Features

• Integral Valve Seat – Metal to metal seated
• Non-rotating Needle
• External Stem Thread – Packing below stem threads.

Stem threads are protected from process media
(non-wetted).

• Stem with Cold Rolled Threads
• Blow-out Proof Needle
• Back Seat – Metal to metal secondary needle seal
• Lock Pin – Eliminates unauthorized removal of the bonnet
• Color Coded Dust Cap for operating thread protection
• Needle Seal:

Standard Packing in PTFE and Graphite
or Carbon filled PTFE – TA-Luft Option

• Max. Operating Pressure 420 bar (6,092 psi)

– 689 bar (10,000 psi) optional

• Anti-Tamper Valve Head Options available
• All Non-wetted Parts in 316 Stainless Steel

Standard Needle Valves

Standard Vent Valve

St

an

d

ar

d: 5

7 (

2

.2

4"

) o

pe

n

T

A

-L

uf

t O

pt

io

n: 62 (

2

.4

4

") o

pe

n

Standard Isolate Valve

Color Coded Dust Cap
For stem thread protection:

•  Isolate

blue

•  Vent / Test

red

•  Equalize

green

Color Coded Options
Following options are also color coded
below dust cap:

•  Oxygen Service

white

•  Graphite Packing

black

•  TA-Luft Option

magenta

For example

TA-Luft Option

Graphite Packing

Oxygen Service

Wetted components listed in bold .

65

.5 (

2

.5

8

")

background image

7

www.as-schneider.com

Standard Valve Head Units

Standard Valve Head Units

OS&Y Bolted Bonnet –  Standard Packing

Features

•  Integral Valve Seat – Metal to metal seated
• Non-rotating Needle
• External Stem Thread – Packing below stem threads.

Stem threads are protected from process media (non-wetted).

• Stem with Cold Rolled Threads
• Blow-out Proof Needle
• Spring Washers for compensation of thermal expansion
• Back Seat – Metal to metal secondary needle seal
• Color Coded Dust Cap for operating thread protection
• Needle Seal:

Standard Packing in PTFE and Graphite
or Carbon filled PTFE – TA-Luft Option

• Bonnet Seal Ring: Graphite
• Fire Safe approved acc. to ISO 10497 and API 607

– Graphite Packing only

• Max. Operating Pressure 420 bar (6,092 psi)

– 689 bar (10,000 psi) optional

• Anti-Tamper Valve Head Options available
• All Non-wetted Parts in 316 Stainless Steel

Packing  adjustment  may  be  required  during  the  service
life of the valves.

Valves that have not been cycled for a period of time may
have a higher initial actuation torque.

Needle Valves with OS&Y Bolted Bonnet

Pressure-Temperature Rating

8

4 (

3.

31"

) o

pe

n

Standard Valve Head Units

• ASME B31.1

Power Piping

• ASME B31.3

Process Piping  Specification for

Pipeline Valves

• ASME B16.34

Valves – Flanged, Threaded and Welding End

• ASME B16.5

Pipe Flanges and Flanged Fittings

• NACE MR0175/  Petroleum and Natural Gas Industries –

ISO 15156

Materials for use in H2S-containing Environ-

ments in Oil and Gas Production

• API 598

Valve Inspection and Testing

• ISO 5208

Industrial Valves – Pressure Testing of Metallic

Valves

• API 607/

Fire Test for Soft-Seated Quarter Turn Valves

ISO 10497

Testing of Valves. Fire Type-testing

Requirements

• MSS SP-25

Standard Marking System for Valves, Fittings,

Flanges, and Unions

• MSS SP-61

Pressure Testing of Valves

• MSS SP-99

Instrument Valves

Manufactured according to the following
Codes and Specifications

background image

8

AS-Schneider

OS&Y Needle Valves acc. to ISO 15848

Valve Head Units for Fugitive Emission Applications

Features

•  Integral Valve Seat – Metal to metal seated
•  Non-rotating Needle
•  External Stem Thread – Packing below stem

threads. Stem threads are protected from
process media (non-wetted).

•  Stem with Cold Rolled Threads
•  Blow-out Proof Needle
•  Back Seat – Metal to metal secondary needle

seal

•  Lock Pin – Eliminates unauthorized removal

of the bonnet

•  Color Coded Dust Cap for operating thread

protection

•  Needle Seal:

Standard Packing in PTFE or Graphite plus
FKM O-Ring Needle Seal – RGD resistant
(RGD = Rapid Gas Decompression)

•  Max. Operating Pressure 420 bar (6,092 psi)
•  Anti-Tamper Valve Head Options available
•  All Non-wetted Parts in 316 Stainless Steel
•  Types also comply with the requirements of

TA-Luft 2002

ISO FE Performance Data

ISO FE Type 1:
Class A 1,500 cycles / –29°C to     40°C

(–20°F    to 104°F)

Class A      500 cycles /  –29°C      to 200°C

(–20°F       to 392°F)

Class B  1,500 cycles /   –29°C      to 200°C

(–20°F       to 392°F)

ISO FE Type 3:
Class B  1,500 cycles /  –29°C      to 200°C

(–20°F       to 392°F)

Needle Valves acc. to ISO 15848

Screwed Bonnet –  Type 1 O-Ring Needle Seal + Graphite Packing
Type 3 PTFE Packing

OS&Y Bolted Bonnet –  Type 1 O-Ring Needle Seal + Graphite Packing

Type 3 PTFE Packing

8

6 (

3.

39

") o

pe

n

8

4 (

3.

31"

) o

pe

n

Features

•  Integral Valve Seat – Metal to metal seated
•  Non-rotating Needle
•  External Stem Thread – Packing below stem

threads. Stem threads are protected from
process media (non-wetted).

•  Stem with Cold Rolled Threads
•   Blow-out Proof Needle
•  Spring Washers for compensation of thermal

expansion

•  Back Seat – Metal to metal secondary stem

seal

•  Colour Coded Dust Cap for operating

thread protection

• Needle Seal:

Standard Packing in PTFE or Graphite plus
FKM O-Ring Needle Seal - RGD resistant

• Bonnet Seal Ring: Graphite
• Fire Safe approved acc. to ISO 10497

and API 607; Graphite Packing only

• Max. Operating Pressure 420 bar (6,092 psi)
• Anti-Tamper Valve Head Options available
• All Non-wetted Parts in 316 Stainless Steel
• Types also comply with the requirements of

TA-Luft 2002

ISO FE Performance Data

Class A 2,500 cycles /   –29°C to     40°C

(–20°F    to 104°F)

Class A      500 cycles /  –29°C      to 200°C

(–20°F       to 392°F)

Class B  2,500 cycles /   –29°C      to 200°C

(–20°F       to 392°F)

ISO FE Type 3:
Class B 2,500 cycles /  –29°C      to 200°C

(–20°F       to 392°F)

Valve Head Units for Fugitive Emission Applications

background image

9

www.as-schneider.com

Valve Head Unit Options

Anti-Tamper Head Unit

All Valve Head Units Anti-Tamper:
Option Code V

Part Number ATK-ES

Incl. Padlock:
Option Code W or Y

Valve Head Unit Options

Stainless Steel Handwheel and 'Locking Plate' Design

Valve Head Units for Fugitive Emission Applications

Pressure-Temperature Rating -
Needle Valve for Fugitive Emission Applications

Option Code Q
Option Code R incl. Padlock

The valves are operated with a special Anti-Tamper Key (AT-Key), which fits exactly in the key guide. The valve can therefore only be
operated with the AT-Key. In addition to this safety function, installing a padlock prevents the AT-Key being inserted into the key
guide. Operating the valve is therefore no longer possible which protects your equipment against unauthorized opening and closing of
the valve head units. The valve can be locked reliably in every position required.

The  valves  can  be  ordered  with  Stainless  Steel  Handwheel  and
Locking Plate Design, also including Padlock.

This  design  allows  minimum  handle  movements  and  is  ideal  as
protection against unauthorized closing of the valve.

background image

10

AS-Schneider

• Dual Flange Style

•  Wafer Style

• RD1 Style

• RFB Style

Flange x Flange Types

Monoflanges I Options

Monoflanges I Options

Dual Flange Style

RD1 Style
For Direct Mounting of Transmitters acc. to EN 61518

Wafer Style
Option S

RFB Style
For Direct Mounting of Rosemount 2051/3051 Coplanar

TM

Pressure

Transmitter

background image

11

www.as-schneider.com

Monoflanges I Options

Monoflanges I Options

Monoflanges I Options

Dual Outlet Types for Direct Mounting
to Horizontal or Vertical Pipelines

Vertical Pipeline, Radial Outlet
Process Monoflange (e.g. Block & Bleed) Swivel Gauge
Adaptor installed on outlet.

Horizontal Pipeline, Axial Outlet
Process Monoflange (e.g. Block & Bleed) Swivel Gauge
Adaptor installed on outlet.

Vertical Pipeline, Radial Outlet
Instrument Monoflange (SM Type) with an Integral Swivel
Gauge Adaptor. For more information see Catalogue
'AS-3601 I Modular Mounting System'.

Horizontal Pipeline, Axial Outlet
Instrument Monoflange (SM Type) with an Integral
Swivel Gauge Adaptor. For more information see
Catalogue 'AS-3601 I Modular Mounting System'.

background image

12

AS-Schneider

Assemblies

There are various possibilities in using the Monoflange concept not only for Pressure Applications. The following pictures are showing
two examples for Differential Pressure Assemblies – Flow and Level.

Flow Assembly - Consisting of:
• 1 x Process Monoflange Type V, e.g. DB & B with an Integrated

3 Valve Manifold (High Pressure Side + )

• 1 x Process Monoflange, e.g. DB & B (Low Pressure Side - )

Level Assembly - Consisting of:
(Wet / Dry Leg Installation)
• 1 x Process Monoflange Type V, e.g. DB & B with an Integrated

4 Valve Manifold (High Pressure Side + )

• 1 x Process Monoflange, e.g. DB & B (Low Pressure Side - )

Monoflanges I Assemblies

Monoflanges I Assemblies

Vent

Process

Process

Vent

Vent

Instrument

+

-

Process

Process

Vent

Vent

Vent

W

et L

eg

D

ry L

eg

Instrument

+

-

background image

13

www.as-schneider.com

Process Monoflanges I Weights and Dimensions

Monoflanges I Assemblies

Process Monoflanges I Weights and Dimensions

Ø D

X

Flange Size (in)

Flange Class

ØD (mm)

Flange Face

Approx. Weight

(kg)

RF x mm

RTJ x mm

1/2

150

98.6

36.6

-

2.5

1/2

300

98.6

36.6

40.6

2.6

1/2

600

98.6

41.4

40.6

2.6

1/2

900 / 1,500

120.7

41.4

41.4

3.5

1/2

2,500

133.4

41.4

41.4

4.3

3/4

150

98.6

36.6

-

2.6

3/4

300

117.3

36.6

41.4

3.5

3/4

600

117.3

41.4

41.4

3.5

3/4

900 / 1,500

130.0

41.4

41.4

4.1

3/4

2,500

139.7

41.4

41.4

4.8

1

150

108.0

36.6

41.4

3.0

1

300

124.0

36.6

41.4

3.9

1

600

124.0

41.4

41.4

3.9

1

900 / 1,500

149.3

41.4

41.4

5.1

1

2,500

158.8

42.4

42.4

6.1

1 1/2

150

127.0

36.6

41.4

4.1

1 1/2

300

155.4

36.6

41.4

6.0

1 1/2

600

155.4

41.4

41.4

6.0

1 1/2

900 / 1,500

177.8

41.4

41.4

7.4

1 1/2

2,500

203.2

51.4

52.9

11.4

2

150

152.4

36.6

41.4

5.4

2

300

165.1

36.6

42.9

6.4

2

600

165.1

41.4

42.9

6.9

2

900 / 1,500

215.9

45.4

46.9

12.0

2

2,500

235.0

58.4

59.9

17.5

Flange x Thread

Process Monoflanges - Weights and Dimensions

background image

14

AS-Schneider

Ø D

X

Flange Size (in)

Flange Class

ØD (mm)

Flange Face

Approx. Weight

(kg)

RF

x mm

RTJ

x mm

1/2

150

88.9

33.6

-

1.6

1/2

300

95.3

33.6

37.6

2.0

1/2

600

95.3

38.4

37.6

2.0

1/2

900 / 1,500

120.7

38.4

38.4

2.9

1/2

2,500

133.4

38.4

38.4

3.7

3/4

150

98.6

33.6

-

2.0

3/4

300

117.3

33.6

38.4

2.9

3/4

600

117.3

38.4

38.4

2.9

3/4

900 / 1,500

130.0

38.4

38.4

3.5

3/4

2,500

139.7

39.4

39.4

4.2

1

150

108.0

33.6

38.4

2.6

1

300

124.0

33.6

38.4

3.3

1

600

124.0

38.4

38.4

3.3

1

900 / 1,500

149.3

38.4

38.4

6.8

1

2,500

158.8

42.4

42.4

5.7

1 1/2

150

127.0

33.6

38.4

3.8

1 1/2

300

155.4

33.6

38.4

5.3

1 1/2

600

155.4

38.4

38.4

5.3

1 1/2

900 / 1,500

177.8

39.4

39.4

6.8

1 1/2

2,500

203.2

51.4

52.9

11.5

2

150

152.4

33.6

38.4

5.1

2

300

165.1

33.6

39.9

5.7

2

600

165.1

38.4

39.9

6.2

2

900 / 1,500

215.9

45.4

46.9

11.6

2

2,500

235.0

58.4

59.9

17.0

Flange x Thread

Instrument Monoflanges - Weights and Dimensions

Instrument Monoflanges I Weights and Dimensions

Instrument Monoflanges I Weights and Dimensions

background image

15

www.as-schneider.com

Monoflanges I Ordering Information

Instrument Monoflanges I Weights and Dimensions

Monoflanges I Ordering Information

Ordering Information

1

2

3

4

5

6

7

8

9

10

11

12

13

14

M

G

B

-

N

F

E

L

N

4

-

S

C

Monoflanges

Outlet Conenction

Type

Axial

Radial

Dual

MA

MB

MC

Block (OS & Y)

MD

ME

MF

Block & Bleed (OS & Y / Needle)

MG

MH

MJ

Double Block & Bleed (OS & Y / Needle / Needle)

MK

ML

MM

Block (Needle)

MN

MP

MQ

Block & Bleed (Needle / Needle)

MR

MS

MT

Double Block & Bleed (Needle / Needle / Needle)

Packing

A

PTFE

L

ISO FE Series Type 1

B

Graphite

N

ISO FE Series Type 3

W

Carbon filled PTFE - TA-Luft

Process Connection

ASME Flange

EN Flange

NA

1/2" RF

NM

1 1/2" RTJ

QA

DN15 B1

QW

DN50 B1

NC

1/2" RTJ

NN

2" RF

QD

DN15 C (tongue)

Q2

DN80 B1

ND

3/4" RF

NQ

2" RTJ

QF

DN20 B1

NF

3/4" RTJ

NR

2 1/2" RF

QL

DN25 B1

API Flanges
on request!

NG

1" RF

NT

2 1/2" RTJ

QN

DN25 B2

NJ

1" RTJ

NU

3" RF

QP

DN25 C (tongue)

NK

1 1/2" RF

NW 3" RTJ

QQ

DN25 D (groove)

ASME Flange Class

EN Flange PN Designation

A

150

E

900 / 1,500

D

PN 40

B

300

F

2,500

G

PN 160

C

600

H

PN 250

Outlet Connection

Thread Connection

Transmitter Interface

LGQ G 1/2 Female (Integral Swivel Gauge Adaptor)

RD1

EN 61518 Type A (for Axial Outlet available only)

LN4

1/2 NPT Female

RFB

For Rosemount 2051/3051 Coplanar

TM

Transmitter (for Axial Outlet available only)

JN4

1/2 NPT Male

For ASME Flange Connections on Axial Outlet use Designator of Process Connection.
Dual Flange Style is Standard – Wafer Style see Options.

Body Material

C

A105

L

A350 LF2

V

Alloy 625 UNS N06625

F

Duplex UNS S31803

M

Alloy 400 UNS N04400

D

Super Duplex UNS S32750

H

Alloy C-276 UNS N10276

S

1.4401 / 1.4404 / 316 / 316L

B

6Mo UNS S31254

Vent Connection

A

Without (Block Type only)

E

1/2 NPT Female

C

1/4 NPT Female

F

1/2 NPT Female plugged

D

1/4 NPT Female plugged

Options

B

Oxygen Service

R

Stainless Steel Handwheel and Locking Plate Design incl. Padlock

S

Wafer Style (Flange x Flange)

Q

Stainless Steel Handwheel and Locking Plate Design without Padlock

M

Wetted Parts with 3.1 Certificate

V

All Valve Head Units Anti-Tamper lockable without Padlock

W

All Valve Head Units Anti-Tamper lockable incl. Padlock

Y

Vent Valve Head Units Anti-Tamper lockable incl. Padlock

Wetted Parts according to above mentioned material list are supplied according to NACE MR0175/MR0103 and ISO 15156 (latest issue).
Note: Not every configuration which can be created in the ordering information is feasible / available.

background image

16

AS-Schneider

VariAS-Blocks - Double Block & Bleed Types

The  VariAS-Blocks  -  Double  Block  &  Bleed  Types  are  designed  to  replace  conventional,  multiple-valve  installations.  The  VariAS-
Blocks are forged, one-piece double block and bleed assemblies for primary isolation of pressure take-offs, where the valve is directly
mounted to the vessel or process pipe. Instruments may be directly mounted to the valve outlet or remote mounted with impulse
pipe work.

Features two independently operable ball valves for isolation with an intermediate needle valve alternatively ball valve for venting.

VariAS-Blocks - Double Block & Bleed Types

VariAS-Blocks - Double Block & Bleed Types

Flange x Flange

Flange x Thread

Double Isolate Ball Valve and
Single Vent Needle Valve

Double Isolate Ball Valve and
Single Vent Ball Valve

background image

17

www.as-schneider.com

VariAS-Blocks - Double Block & Bleed Types

VariAS-Blocks I General Features

Body Material Options

Material Group

AS Material
Designation

Material
No.

Short Name

Equivalent

UNS-No.

Material Grade

acc. to ASTM

VariAS-Blocks

Carbon Steel

A105

A105

Optional

LF2

LF2

Optional

Austenitic Stainless
Steel

316 quadruple
certified*

1.4401

X5CrNiMo17-12-2

S 31600

316

Standard

1.4404

X2CrNiMo17-12-2

S 31603

316L

Standard

6Mo

1.4547

X 1CrNiMoCuN20-18-7

S 31254

Standard

Austenitic-Ferritic
Stainless Steel

Duplex

1.4462

X2CrNiMoN22-5-3

S 31803

F51

Standard

Superduplex

1.4410

X2CrNiMoN25.7.4

S 32750

F53

Standard

1.4501

X2CrNiMoCuWN25.7.4

S 32760

F55

Optional

Nickel Based
Alloys

Alloy 400

2.4360

NiCu30Fe

N 04400

Standard

Alloy C-276

2.4819

NiMo 16 Cr 15 W

N 10276

Standard

Alloy 625

2.4856

NiCr22Mo9Nb

N 06625

Standard

Alloy 825

2.4858

NiCr21Mo

N 08825

Optional

• Ball Bore Size 10 mm (0.39")

Needle Valve Bore Size 5 mm (0.197")

• ASME B16.5 Flange Connections

Flange Size 1/2" to 2" (DN15 to DN50)
Flange Class 150 to 2,500

• Ball / Needle / Ball Design

• One-Piece Forged Body

• Outlet Connection 1/2 NPT Female or Flange Connection acc.

to Process Connection

•  Vent Connection 1/2 NPT Female

• Fire Safe Tested acc. to ISO 10497 / API 607 – With Graphite

Seals only

• Anti-Static Design

• Anti-Blowout Stems

Sour Gas Service:
Wetted parts according to a.m. material list are supplied as
standard according to NACEMR0175/MR0103 and ISO 15156
(latest issue).

Pressure Test:
A shell test and a seat leakage test are performed at 1.5 times
the maximum working pressure acc. to EN 12266-1 - P10, P11
and P12 respectively MSS-SP61 (and complies also with ASME
B31.1  and B31.3) at every standard AS-Schneider VariAS-Block
g

100% Pressure Tested!

Certification:
Certified Mill Test Report (CMRT) as inspection certificate 3.1
acc. to EN 10 204 for valve body material and pressure test
available on request.

• API Flange Connections (up to 689 bar [10,000 psi])

• EN 1092-1 Flange Connections

• Ball / Ball / Ball Design

• Ball / Needle Design

• Needle / Needle / Needle Design

• Ball Bore Size 20 mm (0.787")

• Anti-Tamper Head Units

• Swivel Gauge Connectors – See also Accessories on page 26

• Pressure Tested according to API 598

• Wake Frequency Calculation for injection or sampling applications

Fugitive Emission Application:
For Fugitive Emission Applications AS-Schneider is providing
TA-Luft and ISO 15848 solutions. For more details please contact
the factory.

Oxygen Service:
On request.

If you don't find your options in this catalogue, please
contact the factory.

* Quadruple Certified means 316 / 316L / 1.4401 / 1.4404

Standard Features

Optional Features

VariAS-Blocks I General Features

background image

18

AS-Schneider

Standard Valve Designs for VariAS-Blocks

Standard Valve Designs for VariAS-Blocks

Components

Carbon Steel

Stainless Steel

Exotic Alloys

Material / Material No.

Body

A 105 resp. LF2

316 / 316L

Alloy 400 Alloy C-276

Duplex UNS S32750 Alloy 625

6Mo

Body End Connector

Ball

316 / 316L

Stem

Seat Housing

Ball Seat

Reinforced PTFE or PEEK

Seal Rings (Seat Housing)

FKM / Graphite or FKM / PTFE

Primary Stem Seal

Reinforced PTFE

Packing

PTFE or Graphite

Gland

316

Locking Plate

316

Handle

316

Handle Grip

Vinyl

Stop Pin

A4

Standard Design –  Stem Seal: Packing

Features

• Floating Ball Design
• Ball Valve Seat: Carbon filled PTFE I PEEK optional
• Ball Valve Seats are totally enclosed in seat housing
• Seat Housing Seals: FKM, RGD resistant and Graphite or PTFE
• Stem Seal: Standard Packing in PTFE and Graphite
• Max. Operating Pressure 420 bar (6,092 psi)
• Anti-Blowout Stem Design
• Anti-Static Design
• Fire Safe Tested acc. to ISO 10497 / API 607

– With Graphite Seals only

• Positive Stop Pins
• All Non-wetted Parts in 316 Stainless Steel
• Lockable Handle with Color Coded Handle Grip

Isolate

blue

I

Vent

red

Ball Valves

Screwed Bonnet –  Needle Seal: Packing

Features

• Integral Valve Seat – Metal to metal seated
• Non-rotating Needle
• External Stem Thread – Packing below stem threads.

Stem Threads are protected from process media (non-wetted).

• Stem with Cold Rolled Threads
• Blow-out Proof Needle
• Back Seat – Metal to metal secondary needle seal
• Lock Pin – Eliminates unauthorized removal of the bonnet
• Color Coded Dust Cap for operating thread protection (see page 6)
• Needle Seal: Standard Packing in PTFE and Graphite
• Max. Operating Pressure 420 bar (6,092 psi)
• Anti-Tamper Valve Head Options and Stainless Steel Handwheel

available (see Page 9)

• Bill of Material (see Page 6)
• All Non-wetted Parts in 316 Stainless Steel

Standard Needle Vavles

Wetted components listed in bold .

St

an

d

ar

d: 5

7 (

2

.2

4"

) o

pe

n

T

A

-L

uf

t O

pt

io

n: 62 (

2

.4

4

") o

pe

n

background image

19

www.as-schneider.com

Standard Valve Designs for VariAS-Blocks

Fugitive Emission Application Designs for VariAS-Blocks Features

Fugitive Emission Application Designs for VariAS-Blocks

Features

• Integral Valve Seat – Metal to metal seated
• Non-rotating Needle
• External Stem Thread – Packing below stem

threads. Stem threads are protected from
process media (non-wetted).

• Stem with Cold Rolled Threads
• Blow-out Proof Needle
• Back Seat – Metal to metal secondary needle

seal

• Lock Pin – Eliminates unauthorized removal

of the bonnet

• Color Coded Dust Cap for operating thread

protection (see page 6)

• Needle Seal:

Standard Packing in PTFE or Graphite plus
FKM O-Ring Needle Seal – RGD resistant
(RGD = Rapid Gas Decompression)

• Max. Operating Pressure 420 bar (6,092 psi)
• Anti-Tamper Valve Head Options available

on request

• All Non-wetted Parts in 316 Stainless Steel
• Types also comply with the requirements of

TA-Luft 2002

ISO FE Performance Data

ISO FE Type 1:
Class A 1,500 cycles / –29°C to     40°C

(–20°F    to 104°F)

Class A      500 cycles /  –29°C      to 200°C

(–20°F       to 392°F)

Class B  1,500 cycles /   –29°C      to 200°C

(–20°F       to 392°F)

ISO FE Type 3:
Class B  1,500 cycles /  –29°C      to 200°C

(–20°F       to 392°F)

Needle Valves acc. to ISO 15848

Screwed Bonnet –  Type 1 O-Ring Needle Seal + Graphite Packing
Type 3 PTFE Packing

8

6 (

3.

39

") o

pe

n

Ball Valves acc. to ISO 15848

Standard Design –  Stem Seal: Packing

Features

•  Floating Ball Design
• Ball Valve Seat: Carbon filled PTFE I PEEK optional
•  Ball Valve Seats are totally enclosed in seat housing
•  Seat Housing Seals: FKM, RGD resistant and Graphite or PTFE
•  Stem Seal: Standard Packing in PTFE and Graphite
•  Max. Operating Pressure 420 bar (6,092 psi)
•  Anti-Blowout Stem Design
•  Anti-Static Design
•  Fire Safe Tested acc. to ISO 10497 / API 607

– With Graphite Seals only

•  Special Treated Gland for long service life
•  Glands adapted to packing
•  Lockable Handle
•  Positive Stop Pins
•  All Non-wetted Parts in 316 Stainless Steel
•  Also complies with the requirements of TA-Luft 2002

ISO FE Performance Data

PTFE Packing
Class A 1,500 cycles / –29°C to     40°C

(–20°F    to 104°F)

Class B      500 cycles /   –29°C       to 200°C

(–20°F       to 392°F)

Graphite Packing
Class A    500 cycles /    –29°C to      40°C

(–20°F    to 104°F)

Class B   1,500 cycles /     –29°C       to 200°C

(–20°F       to 392°F)

Class A 2,500 cycles                    On request

background image

20

AS-Schneider

Pressure Ratings, Codes and Specifications for VariAS-Blocks

Pressure Ratings, Codes and Specifications for VariAS-Blocks

Packing  adjustment  may  be  required  during  the

service life of the valves.

Valves that have not been cycled for a period of

time may have a higher initial actuation torque.

Pressure-Temperature Rating -
Ball Valve

Pressure-Temperature Rating -
Needle Valve for Fugitive Emission Applications

Pressure-Temperature Rating -
Needle Valve

Pressure-Temperature Rating -
Ball Valve for Fugitive Emission Applications

• ASME B31.1

Power Piping

• ASME B31.3

Process Piping  Specification for

Pipeline Valves

• ASME B16.34

Valves – Flanged, Threaded and Welding End

• ASME B16.5

Pipe Flanges and Flanged Fittings

• NACE MR0175/  Petroleum and Natural Gas Industries –

ISO 15156

Materials for use in H2S-containing Environ-

ments in Oil and Gas Production

• API 6D /

Specification for Pipeline Valves

ISO 14313

Petroleum and Natural Gas Industries –

Pipeline Transportation Systems – Pipeline

Valves

• API 598

Valve Inspection and Testing

Manufactured according to the following
Codes and Specifications

• ISO 5208

Industrial Valves – Pressure Testing of

Metallic Valves

• API 607/

Fire Test for Soft-Seated Quarter Turn Valves

ISO 10497

Testing of Valves. Fire Type-testing

Requirements

• MSS SP-25

Standard Marking System for Valves, Fittings,

Flanges, and Unions

• MSS SP-61

Pressure Testing of Valves

• MSS SP-99

Instrument Valves

background image

21

www.as-schneider.com

Pressure Ratings, Codes and Specifications for VariAS-Blocks

VariAS-Blocks I Options

VariAS-Blocks I Options

DE Series – Features one ball valve and a needle valve for venting.

Block & Bleed Types

Features two independently operable needle valves for isolation and a needle valve for venting.

Double Block & Bleed Types

Flange x Thread

Thread x Thread

DC Series
Flange x Thread

Manifold Type C
(see Catalogue 'AS-2601 I E Series Valves and Manifolds')
Thread x Thread

background image

22

AS-Schneider

VariAS-Block for Injection and Sampling Applications

VariAS-Block for Injection and Sampling Applications

All options and configurations shown within the standard VariAS-Block range can be offered by the addition of a customized injection probe respec-
tively sampling probe which extends from the pipe flange into the process stream. The probe is designed as a one piece solution with a fine-turned
surface to optimize the wake frequency behavior and provide utmost stability. The probe lengths must be specified by the customer. The probe O.D.
is 25 mm. Wake frequency calculation and support collar on request.

VariAS-Block for Injection and Sampling Applications

VariAS-Block for Sampling Applications (Option 1)
This design has been developed to remove a sample directly from the process stream at full system pressure.

VariAS-Block for Injection Applications (Option V)
This design has been developed to inject directly into the process stream at full system pressure. The integral check valve eliminates the risk of back
flow out of the process stream during the injection. Available on both flanged and threaded connections.

background image

23

www.as-schneider.com

VariAS-Block for Injection and Sampling Applications

VariAS-Blocks I Weights and Dimensions

VariAS-Blocks I Weights and Dimensions

Ø D

L

VariAS-Blocks - Weights and Dimensions

Flange Size (in)

Flange Class

ØD (mm)

Bore Size 9.5 mm (3/8")

Bore Size 20 mm

Flance Face

Approx. Weight

(kg)

Flance Face

Approx. Weight

(kg)

RF

L (mm)

RTJ

L (mm)

RF

L (mm)

RTJ

L (mm)

1/2

150

88.9

199.2

-

3

-

-

-

1/2

300

95.3

199.2

207.2

4

-

-

-

1/2

600

95.3

208.8

207.2

4

-

-

-

1/2

900 / 1,500

120.6

208.8

208.8

6

-

-

-

1/2

2,500

133.4

208.8

208.8

8

-

-

-

3/4

150

98.6

199.2

-

4

-

-

-

3/4

300

117.3

199.2

208.8

5

-

-

-

3/4

600

117.3

208.8

208.8

5

-

-

-

3/4

900 / 1,500

130.0

208.8

208.8

7

-

-

-

3/4

2,500

139.7

240.8

240.8

10

-

-

-

1

150

108.0

199.2

208.8

5

216.4

226.0

8

1

300

124.0

199.2

208.8

6

216.4

226.0

9

1

600

124.0

208.8

208.8

6

226.0

226.0

9

1

900 / 1,500

149.3

240.8

240.8

10

296.0

296.0

15

1

2,500

158.8

240.8

240.8

14

296.0

296.0

18

1 1/2

150

127.0

199.2

208.8

6

216.4

226.0

10

1 1/2

300

155.4

231.2

240.8

9

216.4

226.0

12

1 1/2

600

155.4

240.8

240.8

10

258.0

258.0

15

1 1/2

900 / 1,500

177.8

240.8

240.8

16

296.0

296.0

21

1 1/2

2,500

203.2

265.8

268.8

27

296.0

299.0

31

2

150

152.4

231.2

240.8

9

245.2

245.2

14

2

300

165.1

231.2

243.8

12

213.2

213.2

14

2

600

165.1

240.8

243.8

13

245.2

245.2

17

2

900 / 1,500

215.9

265.8

268.8

28

367.2

367.2

38

2

2,500

235.0

265.8

268.8

40

367.2

367.2

47

Flange x Flange

background image

24

AS-Schneider

VariAS-Blocks I Weights and Dimensions

VariAS-Block I Weights and Dimensions

Lockable Valves
Option W

Ø D

L

VariAS-Blocks - Weights and Dimensions

Flange Size (in)

Flange Class

ØD (mm)

Bore Size 9.5 mm (3/8")

Bore Size 20 mm

Flance Face

Approx. Weight

(kg)

Flance Face

Approx. Weight

(kg)

RF

L (mm)

RTJ

L (mm)

RF

L (mm)

RTJ

L (mm)

1/2

150

88.9

187.2

-

3

-

-

-

1/2

300

95.3

187.2

191.2

3

-

-

-

1/2

600

95.3

192.0

191.2

3

-

-

-

1/2

900 / 1,500

120.6

192.0

192.0

4

-

-

-

1/2

2,500

133.4

192.0

192.0

5

-

-

-

3/4

150

98.6

187.2

-

3

-

-

-

3/4

300

117.3

187.2

192.0

4

-

-

-

3/4

600

117.3

192.0

192.0

4

-

-

-

3/4

900 / 1,500

130.0

192.0

192.0

5

-

-

-

3/4

2,500

139.7

208.0

208.0

6

-

-

-

1

150

108.0

187.2

192.0

4

221.8

226.6

8

1

300

124.0

187.2

192.0

4

221.8

226.6

8

1

600

124.0

192.0

192.0

4

226.6

226.6

9

1

900 / 1,500

149.3

208.0

208.0

6

261.6

261.6

12

1

2,500

158.8

208.0

208.0

8

261.6

261.6

13

1 1/2

150

127.0

187.2

192.0

5

221.8

226.6

9

1 1/2

300

155.4

203.2

208.0

6

221.8

226.6

10

1 1/2

600

155.4

208.0

208.0

7

242.6

242.6

11

1 1/2

900 / 1,500

177.8

208.0

208.0

9

261.6

261.6

15

1 1/2

2,500

203.2

222.5

224.0

15

261.6

263.1

20

2

150

152.4

203.2

208.0

6

236.2

236.2

11

2

300

165.1

203.2

209.5

7

220.2

220.2

11

2

600

165.1

208.0

209.5

8

236.2

236.2

12

2

900 / 1,500

215.9

222.5

224.0

15

297.2

297.2

21

2

2,500

235.0

222.5

224.0

21

297.2

297.2

27

Flange x Thread

background image

25

www.as-schneider.com

VariAS-Block I Weights and Dimensions

VariAS-Blocks I Ordering Information

VariAS-Blocks I Ordering Information

Ordering Information

1

2

3

4

5

6

7

8

9

10

11

12

13

14

D

B

2

-

N

G

C

L

N

4

-

S

C

VariAS-Blocks

Block & Bleed

DD

10 mm (0.39") Bore Ball Valve (Ball / Ball)

DE

10 mm (0.39") Ball Valve (Ball / Needle)

Double Block & Bleed

DA

10 mm (0.39") Bore Ball Valve (Ball / Ball / Ball)

DB

10 mm (0.39") Bore Ball Valve (Ball / Needle / Ball)

DC

Needle Valve (Needle / Needle / Needle) – Not for Threaded Process Connections
gSee Catalogue 'AS-2601 I E Series Valves and Manifolds'

DP

20 mm (0.787") Bore Ball Valve (Ball / Needle / Ball) ≥ Flange Size 1"

Seals – Standard Valve Design

Seals – Fugitive Emission Application Design

Packing / Body Seals

Ball Seat

Packing / Body Seals

Ball Seat

1

PTFE

Carbon filled PTFE*

3

D

Graphite*

2

Carbon filled PTFE

2

Graphite

Carbon filled PTFE*

3

E

PTFE*

1

Carbon filled PTFE

3

PTFE

PEEK

F

PTFE*

1

PEEK

4

Graphite

PEEK

G

Graphite*

2

PEEK

Process Connection

ASME Flange Size

Thread

NA

1/2" RF

NJ

1" RTJ

JN

Male NPT

NC

1/2" RTJ

NK

1 1/2" RF

LN

Female NPT

ND

3/4" RF

NM

1 1/2" RTJ

NF

3/4" RTJ

NN

2" RF

NG

1" RF

NQ

2" RTJ

Process Connection (continued)

ASME Flange Class

Thread Size

A

150

E

900 / 1,500

4

1/2"

B

300

F

2,500

6

3/4"

C

600

Outlet Connection

ASME Flange Size

Thread

NA

1/2" RF

NJ

1" RTJ

LG

Female G (EN837-1)

NC

1/2" RTJ

NK

1 1/2" RF

JN

Male NPT

ND

3/4" RF

NM

1 1/2" RTJ

LN

Female NPT

NF

3/4" RTJ

NN

2" RF

NG

1" RF

NQ

2" RTJ

Outlet Connection (continued)

ASME Flange Class

Thread Size

A

150

E

900 / 1,500

4

1/2"

B

300

F

2,500

6

3/4"

C

600

8

1"

Body Material

C

A105

L

A350 LF2

V

Alloy 625 UNS N06625

F

Duplex UNS S31803

M

Alloy 400 UNS N04400

D

Super Duplex UNS S32750

H

Alloy C-276 UNS N10276

S

1.4401 / 1.4404 / 316 / 316L

B

6Mo UNS S31254

Vent Connection

C

1/4 NPT Female

E

1/2 NPT Female

D

1/4 NPT Female plugged

F

1/2 NPT Female plugged

Options

1

Sampling Probe (starting from 1 1/2'' Flange Size)

Q

Needle Valve: Stainless Steel Handwheel and Locking Plate Design

R

Needle Valve: Stainless Steel Handwheel and Locking Plate Design incl. Padlock

V

Injection Probe incl. Check Valve (starting from 1 1/2" Flange Size) – Only available for 3/8" Bore Ball Valve

W

All Valves lockable incl. Padlock
Note: Flange x Thread Design – Position of Secondary Isolation Valve on opposite side of Primary Isolation Valve

*

1

Needle Valves with ISO FE Type 3 Bonnet (see Page 19).

*

2

Needle Valves with ISO FE Type 1 Bonnet (see Page 19).

*

3

Carbon Filled PTFE Ball Seat – Ball Bore Size 20 mm (0.787") max. Class 1,500.

Wetted Parts according to above mentioned material list are supplied according to NACE MR0175/MR0103 and ISO 15156 (latest issue).
Note: Not every configuration which can be created in the ordering information is feasible / available.

background image

26

AS-Schneider

Accessories for Monoflanges and VariAS-Blocks

Accessories for Monoflanges and VariAS-Blocks

Vent Valve
VS Type

Vent Valve
VT Type

Pipe Plug
PP Type

Vent Valves, Pipe Plugs and Pipe Fittings

Hex Nipple
HN Type

GS Type - For NPT Threads only

GD Type

The  Swivel  Gauge  Adaptors  enable  the  easy  positioning  of  the  pressure  instrument  in  any
direction through 360°.

Ordering Information see Catalogue 'AS-2601 I E Series Valves and Manifolds'.

Swivel Gauge Adaptors

Gauge Syphons

Designed to replace the pigtail syphon, this compact style provides a thermal barrier between hot
vapors and the pressure instrument. This Gauge Syphon reduces also the amount of potential gauge
whip on vibrating lines by bringing the gauge closer to the process connection.

Ordering Information see Catalogue 'AS-0201 I Gauge Valves and Pressure Gauge
Accessories'.

Ordering Information see Catalogue 'AS-2601 I E Series Valves and Manifolds'.

background image

27

www.as-schneider.com

Accessories for Monoflanges and VariAS-Blocks

Double Block & Bleed Pipeline Ball Valves - Taurus Series

Double Block & Bleed Pipeline Ball Valves - Taurus Series

Taurus Series

Taurus is the strong name of our Double Block & Bleed Pipeline Ball Valves product line. A suitable name, because it stands for process
valves, to be used for example on Offshore Platforms, Metering Stations and Compressor Stations, Gas Pipelines, Refineries, etc.!

For more information see our Catalogue 'AS-4201 I Taurus Series'.

Basically we offer 2 different designs: 2 Piece Design and 3 Piece Design, Both Flanged Style and Side Entry.

Features

• Designed in accordance with Industry Standards

i.e. ASME B16.34, ASME B31.3, ASME B16.5, API 6D / ISO 14313

• Full Bore or Reduced Bore

• Standard Materials of construction are forged Carbon Steel LF2,

Stainless Steel 316 and Duplex

• Pressure Class 150 to 2,500

• Fire Safe in accordance to API 607 and ISO 10497

• Compliant to NACE MR0175 and ISO 15156

• Factory Tested in accordance with

ASME B16.34, API 6D / ISO 14313, ISO 5208

• Manufactured in accordance with the Pressure Equipment

Directive

• Ball Seat Material: PTFE, Devlon, PEEK or Metal Seated

• Stem Seal Material: FKM, HNBR - RGD resistant

(RGD = Rapid Gas Decompression) or Graphite

• Anti-Blowout Stem Design and Anti-Static Design

• Weld Inlay: Seat pocket and seal area overlay on request

• Bi-Directional: The Taurus Series floating and trunnion ball

valves are bi-directional as standard.

• Painting: The valves can be supplied with any kind of

adequate coatings for environmental protection, according
to customers specifications.

• Certification and Traceability: Material test certificates 3.1

according to EN 10204. A unique code is stamped on all
relevant components linking them with their material and
chemical analysis certificates.

YOUR BENEFITS:

• Compact Assembly
• Reduced Weight
• Reduced Leak Paths
• Reduced Installation and Maintenance Costs
• Significant Space Savings

2 Piece Design, Flanged Style

3 Piece Design, Flanged Style

background image

AS-2001-EN | May 2015

Tel: +49 7133 101-0

Fax: +49 7133 101-148

www.as-schneider.com

Armaturenfabrik Franz Schneider
GmbH + Co. KG

Bahnhofplatz 12 I 74226 Nordheim
Deutschland / Germany

Tel: +65 62 51 39 00

Fax: +65 62 51 39 90

www.as-schneider.sg

AS-Schneider Asia-Pacific Pte. Ltd.

970 Toa Payoh North, #02-12/14/15
Singapore 318992

Tel: +40 368 41 40 25
Fax: +40 368 41 40 26

www.as-schneider.ro

Armaturenfabrik Franz Schneider SRL

Sales Office:
Str. Basarabilor, Nr. 7 I 100036 Ploiesti
Romania

Tel: +971 4 880 85 75

Fax: +971 4 880 85 76

www.as-schneider.ae

AS-Schneider Middle East FZE

P.O. Box 18749 I Dubai
United Arab Emirates

AS-Schneider America, Inc.

17471 Village Green Dr I Houston, TX 77040
United States of America

Production Plant:
Str. Mihai Viteazu, Nr. 327i I 507085 Harman
Jud. Bra

ş ov I Romania

Tel: +40 244 384 963
Fax: +40 244 384 963

Tel: +1 281 2 58 42 63

Fax: +1 281 5 06 79 35

www.as-schneider.com