PEM® Self-clinching fasteners, Überblick



Beschreibung

In countless areas of modern industry, very thin and very lightweight components such as metal plates, PC boards or plastic pieces are put to use. There is the need to permanently connect them together securely, all the while guaranteeing high values of torque-out and pullout. At the same time, manufacturers expect simple, low-cost assembly. As far back as , PEM® developed a self-clinching fastener that was able to meet these challenges. With increasing success and broad industry acceptance, the product line has been continually expanded, but even so the basic advantages have remained the same: PEM® self-clinching fasteners give
high-performance, are easy to install and save time and expense. PEM® self-clinching fasteners are placed into a mounting hole in the workpiece. There the selfclinching
fastener displaces material in the hole area. This material flows by means of cold deformation into an undercut in the region near the fastener’s shank serrations or a special head design than prevents the component from rotating – the selfclinching fastener becomes an integral part of the workpiece. In addition, PEM® self-clinching fasteners
cause no damage or bulges on the rear side of the workpiece. PEM® self-clinching fasteners are put to use in areas ranging from electronics and the automobile industry, to the construction of machines and apparatus, through to aeronautics and space – and in each case they guarantee a durable, secure anchoring.


background image

PEM

®

Self-clinching fasteners

Easy-to-install – superior performance

background image

2

The center of excellence for high-

performance fastening technology

KVT-Fastening is an expert for high-quality fastening
applications and offers engineering solutions
based on the wide product portfolio of the leading
manufacturers in the market.

Mechanical engineering | Automotive | Electrical engineering | Energy | Precision
engineering | Fluid power | Transportation | Off-shore and Marine | Medical equipment
Aviation and aerospace | Construction industry | Watch manufacturing industry

www.kvt-fastening.com

background image

3

machines as well as, if needed, the integration into
automated serial production workflows.

Ever since 1927, KVT-Fastening has stood for
experience, solution-driven know-how, unique
expertise in development and consultancy as well
as the ultimate in reliability. Since December
2012, KVT-Fastening is a member of the Bossard
Group. Bossard is a leading provider of intelligent
solutions for industrial fastening technology. The
range includes global sales, technical consulting
(engineering) and logistics of fastening technol-
ogy components and bolts. Customers benefit
from the extension of competencies in industrial
fastening technology and from an optimally
enhanced product or service portfolio.

High-performance solutions from KVT-Fastening
are found wherever absolutely safe and secure
connections are essential. These small but
extremely resilient components play key roles
where it matters most – whether in the electronics
and energy sector, the automotive and transporta-
tion industries, aviation and aerospace, engineer-
ing and construction, precision engineering, or
medical equipment.

KVT-Fastening does not just supply standard
products and individual components, but also pro-
vides close and active customer support in the
search for ideal solutions, particularly when spe-
cific requirements must be fulfilled. This portfolio
is complemented by a range of innovative tools and

background image

4

Efficient fasteners even for very thin components

In countless areas of modern industry, very thin and
very lightweight components such as metal plates,
PC boards or plastic pieces are put to use. There is
the need to permanently connect them together
securely, all the while guaranteeing high values of
torque-out and pullout. At the same time, manufac-
turers expect simple, low-cost assembly.
As far back as 1942, PEM

®

developed a self-clinch-

ing fastener that was able to meet these challenges.
With increasing success and broad industry accep-
tance, the product line has been continually expand-
ed, but even so the basic advantages have remained
the same: PEM

®

self-clinching fasteners give

high-performance, are easy to install and save time
and expense.
PEM

®

self-clinching fasteners are placed into a

mounting hole in the workpiece. There the self-
clinching fastener displaces material in the hole
area. This material flows by means of cold deforma-

tion into an undercut in the region near the fasten-
er’s shank serrations or a special head design than
prevents the component from rotating – the self-
clinching fastener becomes an integral part of the
workpiece. In addition, PEM

®

self-clinching fasten-

ers cause no damage or bulges on the rear side of
the workpiece. PEM

®

self-clinching fasteners are

put to use in areas ranging from electronics and the
automobile industry, to the construction of machines
and apparatus, through to aeronautics and space –
and in each case they guarantee a durable, secure
anchoring.

Advantages

n

Extreme load capacity even in metal sheets as
thin as 0.5 mm

n

No special preparation of the mounting hole
necessary

n

No recutting of threads

n

Also ideal for coated surfaces

n

High positional accuracy

background image

5

Contents

11

Self-clinching fasteners (installation, instructions, technical data)

Self-clinching nuts

12, 65
12, 65
13, 65

S, SS, H

(steel, zinc-plated)

CLS, CLSS

(stainless steel)

SP

(hardened stainless steel)

High torque-out and pushout resistances.
Available in various shank lengths.
For stainless steel and metallic materials.

Self-clinching nuts, flush with both sides

14

F

(stainless steel)

Self-clinching nuts made of stainless steel
especially for aluminum panels. After
assembly, neither the top nor bottom
protrudes. To be installed into round holes.
Hexagonal head for torque-out resistance.

Miniature self-clinching nuts

15

SMPS

(stainless steel)

For thin sheets and installation close to
edge.

Self-clinching nuts with blind end

16
16

B

(steel, zinc-plated)

BS

(stainless steel)

Self-clinching nuts with blind end that
prevent the penetration of dirt, spray etc.

Floating self-clinching nuts

17
17

AS

(steel, zinc-plated)

AC

(stainless steel)

Inner nut compensates for mating hole
misalignment with float of up to 0.8 mm.

Floating self-clinching nuts with locking threads

18
18

LAS

(steel, zinc-plated)

LAC

(stainless steel)

Inner lock nut compensates for mating hole
misalignment with float of up to 0.8 mm.

All dimensions are specified in mm.

background image

6

Self-clinching nuts with locking threads

19
19

PL

(steel, zinc-plated)

PLC

(stainless steel)

Self-clinching nuts with embedded nylon
ring as thread locking feature which remains
intact after repeated disassembly.

Miniature self-clinching nuts

20

20

FE, FEO, FEX, FEOX

(stainless steel)

U, UL

(stainless steel)

Smallest design, optionally with locking
feature.

Miniature self-clinching nuts with locking threads

21

CFN

(steel, zinc-plated)

Self-clinching nuts with thread locking fea-
ture. Smallest design for minimal distance to
edge. Self-locking feature remains intact after
repeated disassembly.

Self-clinching nuts with locking threads

22

SL

(steel, zinc-plated)

Self-clinching nuts with notches in head
area.

Weld nuts

23
23

WN

(steel, copper-plated)

WNS

(stainless steel)

Round design with self-locating shank and
three weld projections.

Flare-in nuts

24

RHB

(steel, zinc-plated)

High-performance rivet bushes for thin
panels. Insertion of screw possible from both
sides.

25

RMHB

(steel, zinc-plated)

Design similar to RHB but in a miniature form
for limited installation space.

Self-clinching studs

26, 29,
66
26, 29
26

FH

(steel, zinc-plated)

FHS

(stainless steel)

FHA

(aluminum)

Flush head studs for thru-holes. No
additional flanging or welding necessary.

threaded

27

30

31

FH4

(hard. stainl. steel AISI 400)

FHP

(hard. stainl. steel A286)

TPS

(stainless steel)

MPP

(hardened stainless steel)

For stainless steel and metallic materials.

Für metallic materials.

Miniature self-clinching pins for metallic
materials.

unthreaded

Self-clinching studs for installation close to edge

28
28

FHL

(steel, zinc-plated)

FHLS

(stainless steel)

Low-displacement head studs with reduced
head diameter for use in close to edge applica-
tions (e.g. membrane keyboards).

background image

7

PEM

®

Self-clinching high-strength studs

32, 67
32, 67

HFH

(steel, zinc-plated)

HFHS

(stainless steel)

Self-clinching threaded studs for extremely
high torque-out and pullthrough resistance.

33, 67
33, 67

HFHD

(steel, zinc-plated)

HFHDS

(stainless steel)

Self-clinching threaded studs similar to
HFH and HFHS with a dog point lead-in
option for automatic assembly. Applications
e.g. in automobiles.

34, 68

HFE

(steel, zinc-plated)

Design similar to HFH and HFHS types
with enlarged head diameter for higher
pull-through resistance.

35, 68

HFED

(steel, zinc-plated)

Design similar to HFHD and HFHDS types
with enlarged head diameter for higher
pull-through resistance.

Coarse-thread self-clinching studs

36

Coarse-thread

(steel, zinc-plated)

Flush head studs for thru-holes. Assembly
of mating nut via press-on nuts or clips.

Concealed-head self-clinching studs

37
37

CHA, CFHA

(aluminum)

CHC, CFHC

(stainless steel)

For cylindrical blind milled holes. Especially
for aluminum front panels when invisible
assembly is requested.

Concealed-head self-clinching standoffs

38

CSS, CSOS

(stainless steel)

For cylindrical blind milled holes. Especially
for aluminum front panels when invisible
assembly is requested.

Self-clinching standoffs

39

DSOS

(stainless steel)

Especially for D-sub connectors.

Self-clinching standoffs

40, 69
40, 69

41

42

SO

(steel, zinc-plated)

SOS

(stainless steel)

SO4

(hardened stainless steel)

MSO4

(hardened stainless steel)

Threaded standoffs for installation with their
heads flush with one surface of the mounting
sheet. Can be squeezed into round holes,
hexagonal head for torque-out resistance.

For stainless steel and metallic materials.

Miniature self-clinching standoffs for stainless
steel and metallic materials.

background image

8

Blind self-clinching standoffs

43, 69
43, 69

44

BSO

(steel, zinc-plated)

BSOS

(stainless steel)

BSO4

(hardened stainless steel)

Blind threaded standoffs.

For stainless steel and metallic materials.

Self-clinching captive panel screws

45

PFC2

(stainless steel)

Spring-loaded, captive screw.

46

PF11

(steel, nickel-plated)

Spring-loaded, captive screw.

47

PFHV

(steel, nickel-plated)

Non spring-loaded, captive screw.

Spinning clinch bolts

48
48

SCBJ

(steel, zinc-plated)

SCB

(steel, zinc-plated)

Captive one-piece self-clinching bolts.

Self-clinching spacers

49
49
49

SSA

(aluminum)

SSC

(stainless steel)

SSS

(steel, zinc-plated)

Self-clinching spacers for metallic
materials. For quick attachment or
removal of covers, panels etc.

50

SKC

(stainless steel)

Self-clinching spacers for metallic
materials. For quick attachment or
removal of covers, panels, etc.

Self-clinching conducting pins

51

RADSOK

®

(steel, no finish or

silver-plated)

Self-clinching conducting pins for
metallic materials.

Self-clinching flat contact pins

52

Grounding post

(steel,

tin-plated)

Self-clinching grounding posts for
metallic materials.

Self-clinching cable tie mounts

53

TD

(sintered steel, zincplated)

Self-clinching cable tie mounts for
metallic materials.

background image

9

PEM

®

Self-clinching right-angle fasteners

54
55

RAA

(aluminum)

RAS

(steel)

Self-clinching right-angle fasteners
for metallic materials.

SpotFast

®

self-clinching fasteners

56
56

SF

(steel, zinc-plated)

SFP

(hardened stainless steel)

For permanent flush joining of two metallic
sheets.

TackPin™

57

TA

(aluminum)

For permanent joining of two sheets.

Self-clinching spacers

58

KSSB

(brass)

Self-clinching spacers for PC boards
and other plastics.

Broaching studs

59

KFH

(phosphor bronze)

Broaching studs made of phosphor bronze
especially for PC boards and plastics.
Tin-plated for good solderability.

Broaching nuts

60
60

KF2

(steel, tin-plated)

KFS2

(stainless steel)

Broaching nuts for PC boards and other
plastics. High torque-out resistance due
to distinctive knurl.

Broaching standoffs

61
61

KFE

(steel, tin-plated)

KFSE

(stainless steel)

Broaching standoffs for PC boards and
other plastics. Also available with
thru-holes.

Surface mount nuts and standoffs

62

63
64

KF2

(steel, tin-plated)

SMTSO

(steel, tin-plated)

KFE

(steel, tin-plated)

Broaching nuts on tape and reel for PC
boards assembly.

Broaching standoffs on tape and reel for
PC boards assembly.

KF2

SMTSO

KFE

background image

10

65 – 69 Technical data

70

Test set-ups

71 – 72 PEMSERTER

®

installation machines

73

Supplier identification
Quality assurance

background image

11

PEM

®

Installation

1. Create hole

2. Insert PEM

®

fastener

3. Squeeze in

4. Screw on mating piece

Instructions

n

Determine size of hole according to datasheets

n

Do not deburr or countersink drilled or punched

holes

n

Fastener should be installed in purchside of hole

n

Squeeze in PEM

®

parts (do not use hammer

blows!)

n

Maintain minimum distances to edge (avoid

deformation at sheet edge)

n

When inserting PEM

®

parts made of steel or

stainless steel in aluminum, squeeze in only
after the surface has been anodized

Technical data

n

Thread tolerance: nuts 6H, studs 6g / 4h.

Accuracy to gauge according to ISO 1502

n

UNC / UNF threads upon request

n

Corrosion resistance: steel parts are zinc-plated

and passivated, layer thickness 5 – 6 μ, stainless
steel = passivated

n

Other plaitings upon request

n

All dimensions are specified in mm

Self-clinching fasteners

background image

www.kvt-fastening.com

12

m

h

d

1

d

2

d

3

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

max.

d

3

± 0.25

m

± 0.25

h

max.

sm

min.

sm

Min. distance

hole to edge

Steel, zincpla-

ted, colorless

passivated

Stainless steel,

passivated

S-M2-0

CLS-M2-0

M2

4.25

4.22

6.25

1.50

0.77

0.8

4.8

S-M2-1

CLS-M2-1

0.97

1.0

S-M2-2

CLS-M2-2

1.38

1.4

S-M2.5-0

CLS-M2.5-0

M2.5

4.25

4.22

6.35

1.50

0.77

0.8

4.8

S-M2.5-1

CLS-M2.5-1

0.97

1.0

S-M2.5-2

CLS-M2.5-2

1.38

1.4

S-M3-0

CLS-M3-0

M3

4.25

4.22

6.35

1.50

0.77

0.8

4.8

S-M3-1

CLS-M3-1

0.97

1.0

S-M3-2

CLS-M3-2

1.38

1.4

S-M4-0

CLS-M4-0

M4

5.40

5.38

7.87

2.00

0.77

0.8

6.9

S-M4-1

CLS-M4-1

0.97

1.0

S-M4-2

CLS-M4-2

1.38

1.4

SS-M5-0

CLSS-M5-0

M5

6.40

6.38

8.64

2.00

0.77

0.8

7.1

SS-M5-1

CLSS-M5-1

0.97

1.0

SS-M5-2

CLSS-M5-2

1.38

1.4

S-M6-0

M6

8.75

8.72

11.18

4.08

1.15

1.2

8.6

S-M6-1

CLS-M6-1

1.38

1.4

S-M6-2

CLS-M6-2

2.21

2.3

S-M8-1

CLS-M8-1

M8

10.50

10.47

12.70

5.47

1.38

1.4

9.7

S-M8-2

CLS-M8-2

2.21

2.3

H-M10

M10

12.70

12.67

16.50

7.90

1.48

1.5

12.0

S-M12-1

M12

17.00

16.95

20.57

8.50

3.05

3.18

16.0

Types for other hole dimensions upon request

ZT

0UZ[HSSH[PVU

Self-clinching nuts

For metallic materials

Types S, SS, H
Types CLS, CLSS

Material
Types S, SS, H:

Steel, hardened, zinc-
plated, colorless passivated

Types CLS, CLSS:

Stainless steel 18 / 8 (AISI
302 / 303)

Use
Types S, SS, H:

For sheet hardness up to
HR

B

80

Types CLS, CLSS:

For sheet hardness up to
HR

B

70

Type SP (next page) intended for use in sheets >
HR

B

80

Performance data, see the technical data on
page 65

background image

www.kvt-fastening.com

13

Pem

®

m

h

d

1

d

2

d

3

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

max.

d

3

± 0.25

m

± 0.25

h

max.

sm

min.

sm

Min. distance

hole to edge

SP-M2.5-0

M2.5

4.25

4.20

6.35

1.50

0.77

0.8

4.8

SP-M2.5-1

0.97

1.0

SP-M2.5-2

1.38

1.4

SP-M3-0

M3

4.25

4.20

6.35

1.50

0.77

0.8

4.8

SP-M3-1

0.97

1.0

SP-M3-2

1.38

1.4

SP-M4-0

M4

5.40

5.38

7.95

2.00

0.77

0.8

6.9

SP-M4-1

0.97

1.0

SP-M4-2

1.38

1.4

SP-M5-0

M5

6.40

6.33

8.75

2.00

0.77

0.8

7.1

SP-M5-1

0.97

1.0

SP-M5-2

1.38

1.4

SP-M6-1

M6

8.75

8.73

11.10

4.08

1.38

1.4

8.6

SP-M8-1

M8

10.50

10.47

12.65

5.47

1.38

1.4

9.7

Recommended anvil dimensions

PEMSERTER

®

anvil

order description

Thread

A

± 0.05

P

– 0.03

R

max.

R1

+ 0.13

8012821

M3

6.48

1.63

0.25

0.13

8012823

M4

8.05

2.08

0.25

0.13

8012824

M5

8.84

2.08

0.25

0.13

8012825

M6

11.25

4.14

0.25

0.13

8015360

M8

12.83

5.41

0.25

0.13

A

P

R

R

1

sm

Installation

Self-clinching nuts

For stainless steel and metallic materials

Type SP

Material
Hardened stainless steel (A286)

Use
Special nuts recommended for use in materials -
with sheet hardness up to HR

B

90

Performance data, see the technical data on
page 65

background image

www.kvt-fastening.com

14

m

SW

d

1

d

2

m

SW

d

1

d

2

ZT

0UZ[HSSH[PVU

3-D Data:

http://kvt.partcommunity.com

Order

description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

max.

sw

m

max.

sm

min.

sm

Min. distance

hole to edge

F-M2-1

M2

4.40

4.35

4.8

1.53

1.5

6.0

F-M2-2

2.30

2.3

F-M2.5-1

M2.5

4.40

4.35

4.8

1.53

1.5

6.0

F-M2.5-2

2.30

2.3

F-M3-1

M3

4.40

4.35

4.8

1.53

1.5

6.0

F-M3-2

2.30

2.3

F-M4-1

M4

7.40

7.35

7.9

1.53

1.5

7.2

F-M4-2

2.30

2.3

F-M5-1

M5

7.90

7.88

8.7

1.53

1.5

8.0

F-M5-2

2.30

2.3

F-M6-3

M6

8.75

8.72

9.5

3.05

3.2

8.8

F-M6-4

3.84

4.0

F-M6-5

4.63

4.7

Self-clinching nuts

Flush with both sides | for metallic materials

Type F

Material
Stainless steel 18 / 8 (AISI 300), passivated

Use

n

Especially for thin aluminum sheets

(up to sheet hardness HR

B

70)

n

After installation, neither the top nor bottom

protrude

background image

www.kvt-fastening.com

15

Pem

®

m

h

d

1

d

2

d

3

ZT

0UZ[HSSH[PVU

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

max.

d

3

± 0.25

m

± 0.25

h

max.

sm

min.

sm

Min. distance

hole to edge

SMPS-M2.5

M2.5

3.80

3.79

5.6

1.4

0.61

0.64

3.7

SMPS-M3

M3

4.25

4.22

5.6

1.4

0.61

0.64

4.3

Miniatur self-clinching nuts

For metallic materials

Type SMPS

Design
For metal sheets as thin as 0.64 mm and
installation close to edge

Material
Stainless steel 18 / 8 (AISI 300), passivated

Use
For sheet hardness up to HR

B

70

background image

www.kvt-fastening.com

16

m

h

d

1

d

2

d

3

d

4

L

b

0UZ[HSSH[PVU

ZT

K

3

Y$

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

max.

d

3

± 0.25

d

4

max.

b

min.

L

max.

m

± 0.25

h

max.

sm

min.

sm

Min.

distance

hole to

edge

Steel zinc-

plated,

colorless

passivated

Stainless

steel,

passivated

B-M3-1

BS-M3-1

M3

4.25

4.20

6.35

3.84

5.3

8.5

9.6

0.97

1.0

4.8

B-M3-2

BS-M3-2

1.38

1.4

B-M4-1

BS-M4-1

M4

5.40

5.38

7.95

5.20

7.1

9.8

11.2

0.97

1.0

6.9

B-M4-2

BS-M4-2

1.38

1.4

B-M5-1

BS-M5-1

M5

6.40

6.33

8.75

6.02

7.1

9.8

11.2

0.97

1.0

7.1

B-M5-2

BS-M5-2

1.38

1.4

B-M6-1

BS-M6-1

M6

8.75

8.73

11.10

7.80

7.8

12.7

14.3

1.38

1.4

8.6

B-M6-2

BS-M6-2

2.21

2.3

Self-clinching nuts

With blind end | for metallic materials

Types B, BS

Material
Type B:   Steel, hardened, zinc-plated, colorless

passivated

Type BS:   Stainless steel 18 / 8 (AISI 300), passivated

Use
Blind thread end protects against foreign matter etc.
Type B:  For sheet hardness up to HR

B

80

Type BS:  For sheet hardness up to HR

B

70

background image

www.kvt-fastening.com

17

Pem

®

ZT

TPU

0UZ[HSSH[PVU

K

T

O

K

K

K

K

-SVH[TT[V[HSTT

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

max.

d

3

max.

d

4

± 0.4

m

max.

h

max.

sm

min.

sm

Min.

distance

hole to

edge

Steel,

zinc-plated,

colorless

Stainless steel,

passivated

AS-M3-1

AC-M3-1

M3

7.40

7.35

7.37

9.14

3.31

0.97

1.0

7.62

AS-M3-2

AC-M3-2

1.38

1.4

AS-M4-1

AC-M4-1

M4

9.40

9.38

9.28

11.18

3.31

0.97

1.0

8.64

AS-M4-2

AC-M4-2

1.38

1.4

AS-M5-1

AC-M5-1

M5

10.30

10.29

10.29

11.94

4.32

0.97

1.0

9.14

AS-M5-2

AC-M5-2

1.38

1.4

AS-M6-2

AC-M6-2

M6

13.10

13.06

12.96

15.24

5.34

1.38

1.4

10.67

Floating self-clinching nuts

For metallic materials

Types AS, AC

Design
Floating inner nut compensates for installation
tolerances with float up to 0.8 mm

Material
Type AS:   Carbon steel, case hardened, zinc-

plated, colorless passivated

Type AC:   Stainless steel 18 / 8 (AISI 300), passivated

Use
Both types for sheet hardness up to HR

B

70

background image

www.kvt-fastening.com

18

T

O

K

K

K

K

-SVH[TT[V[HSTT

ZT

TPU

0UZ[HSSH[PVU

K

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

max.

d

3

max.

d

4

± 0.4

m

max.

h

max.

sm

min.

sm

Min.

distance

hole to edge

Steel, zinc-

plated, color-

less passivated

Stainless steel,

passivated

LAS-M3-1

LAC-M3-1

M3

7.40

7.35

7.4

9.14

4.83

0.97

1.0

7.62

LAS-M3-2

LAC-M3-2

1.38

1.4

LAS-M4-1

LAC-M4-1

M4

9.40

9.38

9.3

11.18

5.34

0.97

1.0

8.64

LAS-M4-2

LAC-M4-2

1.38

1.4

LAS-M5-1

LAC-M5-1

M5

10.30

10.29

10.3

11.94

6.86

0.97

1.0

9.14

LAS-M5-2

LAC-M5-2

1.38

1.4

LAS-M6-2

LAC-M6-2

M6

13.10

13.06

13.0

15.24

7.88

1.38

1.4

10.67

Floating self-clinching nuts

With locking threads | for metallic materials

Types LAS, LAC

Design

n

Floating inner lock nut compensates for installa-

tion tolerances with float up to 0.8 mm

n

Locking feature due to elliptical form of the

inner nut in the upper thread area

Material
Type LAS:   Housing zinc-plated steel, colorless

passivated nut of stainless steel
18 / 8 (AISI 300), passivated

Type LAC:  Housing and nut of stainless steel

18 / 8 (AISI 300), passivated

Use
Both types for sheet hardness up to HR

B

70

background image

www.kvt-fastening.com

19

Pem

®

m

h

d

1

d

2

d

3

d

4

ZT

TPU

0UZ[HSSH[PVU

K

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

max.

d

3

max.

d

4

max.

m

max.

h

max.

sm

min.

sm

Min.

distance

hole to edge

Steel, zincpla-

ted, colorless

passivated

Stainless steel,

passivated

PL-M3

PLC-M3

M3

6.00

5.98

5.52

7.01

3.56

1.52

1.5 – 1.8

4.32

PL-M4

PLC-M4

M4

7.50

7.48

7.01

8.54

4.20

1.52

1.5 – 1.8

5.59

PL-M5

PLC-M5

M5

8.00

7.98

7.52

9.00

4.45

1.52

1.5 – 1.8

6.35

Self-clinching nuts

With locking threads | for metallic materials

Types PL, PLC

Design
Locking feature through embedded nylon ring,
withstands temperatures up to + 120 ºC

Material
Type PL:   Steel, hardened, zinc-plated, colorless

passivated

Type PLC:  Stainless steel 18 / 8 (AISI 300),

passivated

Use
Both types for sheet hardness up to HR

B

70

background image

www.kvt-fastening.com

20

0UZ[HSSH[PVU

1)

Non-locking design

2)

Locking feature via elliptic deformation in upper thread area (MIL-N-25027)

3)

For reasons during production, on the threaded end a small clamping effect can arise (no locking effect)

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

L

2

max.

sm

min.

sm

d

1

0

– 0.13

Hole

in sheet

+ 0.08

0

d

2

max.

d

3

± 0.13

L

1

+ 0.4

0

Min.

distance

hole to edge

Stainless steel,

passivated

1)

Stainless steel,

passivated

2)

U-M2-1

3)

UL-M2-1

M2

0.79

0.8 – 0.9

3.60

3.60

2.50

4.07

1.65

2.8

FEOX-M3

3)

FEO-M3

M3

1.02

1.0 – 1.1

4.37

4.40

3.96

4.88

1.90

3.6

FEX-M3

3)

FE-M3

1.53

1.5 – 1.8

FEOX-M4

3)

FEO-M4

M4

1.02

1.0 – 1.1

7.37

7.40

5.23

8.17

2.55

5.2

FEX-M4

3)

FE-M4

1.53

1.5 – 1.8

FEOX-M5

3)

FEO-M5

M5

1.02

1.0 – 1.1

7.37

7.40

6.48

8.17

3.05

5.2

FEX-M5

3)

FE-M5

1.53

1.5 – 1.8

FEX-M6

3)

FE-M6

M6

1.53

1.5 – 1.8

8.72

8.75

7.72

9.74

3.30

7.1

Miniatur self-clinching nuts

For metallic materials

Types FE, FEO, FEX, FEOX, U, UL

Design
Space-saving design due to minimal outside
dimensions

Material
Stainless steel 18 / 8 (AISI 303), passivated,
dry-film lubricant

Use
For sheet hardness up to HR

B

70

background image

www.kvt-fastening.com

21

Pem

®

3-D Data:

http://kvt.partcommunity.com

unified / imperial

Order

descrip-

tion

Size

Thread

Shank

code

sm

min.

sm

Hole

in sheet

+ 0.08

0

L

2

± 0.08

d

1

± 0.05

d

2

± 0.10

d

3

+ 0.03
– 0.10

L

1

max.

Min.

distance

hole to

edge

CFN-440-1

0.112 – 40

(# 4 – 40)

440

1

1.10

3.86

1.02

4.11

4.45

5.16

2.65

2.92

metric

Order

descrip-

tion

Size

Thread

Shank

code

sm

min.

sm

Hole

in sheet

+ 0.08

0

L

2

± 0.08

d

1

± 0.05

d

2

± 0.10

d

3

+ 0.03
– 0.10

L

1

max.

Min.

distance

hole to

edge

CFN-M3-1

M3x0.5

M3

1

1.10

3.86

1.02

4.11

4.45

5.16

2.65

2.92

Miniature self-clinching nuts

With locking threads | for metallic materials

Type CFN

Design
Locking feature due to embedded nylon ring

Material
Steel, zinc-plated, colorless passivated

Use
For sheet hardness up to HR

B

60

Farbe des Nylonrings
For unified / imperial threads:  blue
For metric threads:

black

Nylon locking element

0UZ[HSSH[PVU

Punch

Countersink

background image

www.kvt-fastening.com

22

m

h

d

1

d

2

d

3

ZT

0UZ[HSSH[PVU

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

max.

d

3

± 0.25

m

± 0.25

h

max.

sm

min.

sm

Min. distance

hole to edge

SL-M3-1

M3

4.25

4.22

6.35

1.50

0.98

1.0

4.8

SL-M3-2

1.38

1.4

SL-M4-1

M4

5.40

5.38

7.95

2.00

0.98

1.0

6.9

SL-M4-2

1.38

1.4

SL-M5-1

M5

6.40

6.38

8.75

2.00

0.98

1.0

7.1

SL-M5-2

1.38

1.4

SL-M6-1

M6

8.75

8.73

11.10

4.08

1.38

1.4

8.6

SL-M6-2

2.21

2.3

Self-clinching nuts

With locking threads | for metallic materials

Type SL

Design
Locking feature due to triple indentations in
head area

Material
Steel, zinc-plated, colorless passivated

Use
For sheet hardness up to HR

B

80

background image

www.kvt-fastening.com

23

Pem

®

0UZ[HSSH[PVU

* Availabe upon request

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

L

1

max.

sm

min.

sm

d

1

max.

Hole

in sheet

+ 0.1

0

d

2

0

– 0.25

L

2

± 0.1

Min. distance

hole to edge

Steel,

copper-plated

Stainless steel,

passivated

WN-M3

WNS-M3

M3

0.77

0.77

4.36

4.40

7.82

1.40

3.90

WN-M4

WNS-M4

M4

0.77

0.77

5.50

5.60

9.42

2.58

4.70

WN-M5

WNS-M5

M5

0.77

0.77

6.32

6.40

11.17

3.78

5.60

WN-M6

WNS-M6

M6

1.22

1.24

8.01

8.10

13.25

4.56

6.60

WN-M8*

WNS-M8*

M8

1.27

1.30

9.45

9.50

14.60

6.60

7.90

WN-M10*

WNS-M10*

M10

1.27

1.30

11.45

11.50

16.50

8.10

8.85

Weld nuts

For metallic materials

Types WN, WNS

Design

n

Three weld projections guarantee good electrical

contact and prevent a burn-out in thin sheets

n

The self-locating shank eases the insertion of the

nut and protects threads from weld spatter

n

Round design is especially well suited for auto-

matic feeding

Material
Type WN:   Steel, copper-plated
Type WNS:  Stainless steel (AISI 302), passivated

Weld projection

Self locating shank

background image

www.kvt-fastening.com

24

Flare-in nuts

Type RHB

Design
High-performance rivet bushes for thin sheets and
insertion of screw from both sides

Material
Steel, zinc-plated, colorless passivated

Montage
Punch or drill hole, insert flare-in nut and rivet

n

By  hand

n

With conventional riveting processes

n

With  PEMSERTER

®

3000, PEMSERTER

®

2000

and PEMSERTER

®

4 high-performance

installation systems

Further thread sizes and shank lengths upon
request

3-D Daten:

http://kvt.partcommunity.com

Order description

Thread

Sheet thickness

Hole

+ 0.1

0

d

2

± 0.25

l

1

± 0.25

d

1

0

– 0.15

RHB-M3-22

M3

0.8

5.6

8.0

3.18

5.5

RHB-M3-20

M3

1.0

5.6

8.0

3.18

5.5

RHB-M3-16

M3

1.5

5.6

8.0

3.18

5.5

RHB-M4-22

M4

0.8

6.8

9.5

3.18

6.7

RHB-M4-20

M4

1.0

6.8

9.5

3.18

6.7

RHB-M4-16

M4

1.5

6.8

9.5

3.18

6.7

RHB-M5-22

M5

0.8

8.0

11.1

3.81

7.9

RHB-M5-20

M5

1.0

8.0

11.1

3.81

7.9

RHB-M5-16

M5

1.5

8.0

11.1

3.81

7.9

background image

www.kvt-fastening.com

25

Pem

®

Flare-in nuts

Type RMHB

Design
High-performance rivet bushes for thin sheets and
insertion of screw from both sides, in a miniature
design where insertion space is limited

Material
Steel, zinc-plated, colorless passivated

Montage
Punch or drill hole, insert flare-in nut and rivet

n

By  hand

n

With conventional riveting processes

n

With  PEMSERTER

®

3000, PEMSERTER

®

2000

and PEMSERTER

®

4 high-performance

installation systems

Further thread sizes and shank lengths upon
request

3-D Daten:

http://kvt.partcommunity.com

Order description

Thread

Sheet thickness

Hole

+ 0.1

0

d

2

± 0.25

l

1

± 0.25

d

1

0

– 0.15

RMHB-M3-22

M3

0.8

4.2

5.6

2.8

4.2

RMHB-M3-20

M3

1.0

4.2

5.6

2.8

4.2

RMHB-M3-16

M3

1.5

4.2

5.6

2.8

4.2

RMHB-M4-22

M4

0.8

5.4

7.0

3.2

5.4

RMHB-M4-20

M4

1.0

5.4

7.0

3.2

5.4

RMHB-M4-16

M4

1.5

5.4

7.0

3.2

5.4

RMHB-M5-22

M5

0.8

6.4

8.5

3.8

6.4

RMHB-M5-20

M5

1.0

6.4

8.5

3.8

6.4

RMHB-M5-16

M5

1.5

6.4

8.5

3.8

6.4

background image

www.kvt-fastening.com

26

L

d

1

d

2

a

0UZ[HSSH[PVU

K

*OHTMLYLKHU]PS_ ‡

ZT

TPU3

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

± 0.4

d

3

a

max.

sm

min.

sm

Min.

distance

hole to edge

Steel, zincpla-

ted, colorless

passivated

Stainless steel,

passivated

Aluminum

FH-M2.5-L

FHS-M2.5-L

FHA-M2.5-L

M2.5

2.50

4.1

2.6

1.95

1.0

5.4

FH-M3-L

FHS-M3-L

FHA-M3-L

M3

3.00

4.6

3.1

2.10

1.0

5.6

FH-M4-L

FHS-M4-L

FHA-M4-L

M4

4.00

5.9

4.1

2.40

1.0

7.2

FH-M5-L

FHS-M5-L

FHA-M5-L

M5

5.00

6.5

5.1

2.70

1.0

7.2

FH-M6-L

FHS-M6-L

FHA-M6-L

M6

6.00

8.2

6.1

3.00

1.6

7.9

FH-M8-L

FHS-M8-L

M8

8.00

9.6

8.1

3.70

2.4

9.6

Order description

Length code “L”

(± 0.4)

Steel, zincpla-

ted, colorless

passivated

Stainless steel,

passivated

Aluminum

FH-M2.5-L

FHS-M2.5-L

FHA-M2.5-L

6

8

10

12

15

18

FH-M3-L

FHS-M3-L

FHA-M3-L

6

8

10

12

15

18

20

22

25

28

30

FH-M4-L

FHS-M4-L

FHA-M4-L

6

8

10

12

15

18

20

22

25

28

30

35

38

FH-M5-L

FHS-M5-L

FHA-M5-L

8

10

12

15

18

20

22

25

28

30

35

38

FH-M6-L

FHS-M6-L

FHA-M6-L

10

12

15

18

20

22

25

28

30

35

38

FH-M8-L

FHS-M8-L

12

15

18

20

22

25

28

30

35

38

Self-clinching studs

For metallic materials

Types FH, FHS, FHA

Material
Type FH:    Steel, hardened, zinc-plated, colorless

passivated

Type FHS:   Stainless steel 18/8 (AISI 300), passivated
Type FHA: Aluminum

Use
Type FH:  For sheet hardness up to HR

B

80

Type FHS: For sheet hardness up to HR

B

70

Type FHA: For sheet hardness up to HR

B

50

Note
For thin sheets > 0.5 mm, Types TFH (M3 to M5)
available upon request

Performance data, see the technical data on page 66

background image

www.kvt-fastening.com

27

Pem

®

L

d

1

d

2

a

C

L + 3 mm

B

A

P

R

1

95°

45°

R

2

0UZ[HSSH[PVU

ZT

*V\U[LYZPUR

Order description

Length code “L”

(± 0.4)

Hardened stainless

steel AISI 400

Hardened stainless

steel A286

FH4-M3-L

FHP-M3-L

6

8

10

12

15

18

20

25

FH4-M4-L

FHP-M4-L

6

8

10

12

15

18

20

25

30

35

FH4-M5-L

FHP-M5-L

8

10

12

15

18

20

25

30

35

FH4-M6-L

FHP-M6-L

12

15

20

25

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

± 0.4

a

max.

sm

min.

sm

Min. distance

hole to edge

Hardened stainless

steel AISI 400

Hardened stainless

steel A286

FH4-M3-L

FHP-M3-L

M3

3.00

4.6

2.1

1.0

5.6

FH4-M4-L

FHP-M4-L

M4

4.00

5.9

2.4

1.0

7.2

FH4-M5-L

FHP-M5-L

M5

5.00

6.5

2.7

1.0

7.2

FH4-M6-L

FHP-M6-L

M6

6.00

8.2

3.0

1.6

7.9

Recommended anvil dimensions

Thread

A

+ 0.08

0

B

± 0.05

C

± 0.05

P

± 0.025

R

1

max.

R

2

max.

M3

3.05

3.81

4.57

0.25

0.08

0.13

M4

4.04

4.95

5.82

0.25

0.08

0.13

M5

5.08

6.15

7.16

0.25

0.08

0.13

M6

6.05

7.87

8.79

0.51

0.08

0.13

Self-clinching studs

For stainless steel and metallic materials

Type FH4, FHP

Material
Type FH4:  Hardened stainless steel AISI 400,

passivated

Type FHP: Hardened stainless steel A286

Use
Type FH4:  Special studs for use in materials with

sheet hardness up to HR

B

92

Type FHP:  Special studs for use in materials with

sheet hardness up to HR

B

92

background image

www.kvt-fastening.com

28

a

L

d

2

0UZ[HSSH[PVU

K

*OHTMLYLKHU]PS_ ‡

ZT

TPU3

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

± 0.4

d

3

a

max.

sm

min.

sm

Min. distance

hole to edge

Steel, zincpla-

ted, colorless

passivated

Stainless steel,

passivated

FHL-M2.5-L

FHLS-M2.5-L

M2.5

2.50

3.15

2.6

2.1

1.0

2.8

FHL-M3-L

FHLS-M3-L

M3

3.00

3.65

3.1

2.1

1.0

3.3

FHL-M4-L

FHLS-M4-L

M4

4.00

4.65

4.1

2.4

1.0

4.3

FHL-M5-L

FHLS-M5-L

M5

5.00

5.90

5.1

2.7

1.0

5.6

Order description

Length code “L”

(± 0.4)

Steel, zincpla-

ted, colorless

passivated

Stainless steel,

passivated

FHL-M2.5-L

FHLS-M2.5-L

6

8

10

12

15

18

FHL-M3-L

FHLS-M3-L

6

8

10

12

15

18

20

25

FHL-M4-L

FHLS-M4-L

6

8

10

12

15

18

20

25

30

35

FHL-M5-L

FHLS-M5-L

8

10

12

15

18

20

25

30

35

Self-clinching studs

For metallic materials

Types FHL, FHLS

Design
For installation close to edge

Material
Type FHL:    Steel, hardened, zinc-plated,

colorless passivated

Type FHLS:   Stainless steel 18 / 8 (AISI 300),

passivated

Use
Type FHL:   For sheet hardness up to HR

B

80

Type FHLS:  For sheet hardness up to HR

B

70

background image

www.kvt-fastening.com

29

Pem

®

a

L

d

1

d

2

0UZ[HSSH[PVU

K

ZT

TPU3

3-D Data:

http://kvt.partcommunity.com

Order description

Stud

d

1

± 0.05

Hole

in sheet

+ 0.08

0

d

2

± 0.4

d

3

a

max.

sm

min.

sm

Min. distance

hole to edge

Steel, zincpla-

ted, colorless

passivated

Stainless steel,

passivated

FH-3MM-L

FHS-3MM-L

3

3.50

5.3

3.6

2.30

1.0

6.4

FH-4MM-L

FHS-4MM-L

4

4.10

6.0

4.2

2.30

1.0

7.1

FH-5MM-L

FHS-5MM-L

5

5.50

7.5

5.6

2.55

1.0

7.6

FH-6MM-L

6

6.50

8.6

6.6

3.40

1.6

7.9

Order description

Length code “L”

(± 0.4)

Steel, zincpla-

ted, colorless

passivated

Stainless steel,

passivated

FH-3MM-L

FHS-3MM-L

6

8

10

12

15

18

20

25

30

FH-4MM-L

FHS-4MM-L

8

10

12

15

18

20

25

30

35

FH-5MM-L

FHS-5MM-L

8

10

12

15

18

20

25

30

35

FH-6MM-L

Upon request

Self-clinching pins

For metallic materials

Types FH, FHS

Material
Type FH:    Steel, hardened, zinc-plated,

colorless passivated

Type FHS:   Stainless steel 18 / 8 (AISI 300),

passivated

Use
Type FH:   For sheet hardness up to HR

B

80

Type FHS:  For sheet hardness up to HR

B

70

For sheet hardness up to HR

B

50, aluminum studs

upon request

background image

www.kvt-fastening.com

30

L + 3,2 mm

C

L + 3,2 mm

C

A

60°

L

d

2

d

a

1

64°± 5°

d

3

Installation

sm

* Without  countersink

3-D Data:

http://kvt.partcommunity.com

Order

description

Stud

d

1

± 0.05

Hole

in sheet

+ 0.08

0

d

2

± 0.15

d

3

± 0.4

a

max.

sm

min.

sm

Min. distance

hole to edge

TPS-3MM-L

3

3.50

2.11

5.20

2.29

1.0

6.4

TPS-4MM-L

4

4.50

2.82

6.12

2.29

1.0

7.1

TPS-5MM-L

5

5.50

3.53

7.19

2.29

1.0

7.6

TPS-6MM-L

6

6.50

4.24

8.13

2.29

1.0

7.9

Order

description

Length code “L”

(± 0.4)

TPS-3MM-L

8

10

12

16

TPS-4MM-L

8

10

12

16

TPS-5MM-L

10

12

16

20

TPS-6MM-L

12

16

20

Recommended anvil dimensions (metric)

d

1

sm

Anvil dimensions

A  ± 0.05

C  ± 0.05

3

1 – 1.7

3.88

3.13

>1.7

*

4

1 – 1.7

4.88

4.13

>1.7

*

5

1 – 1.8

5.89

5.13

>1.8

*

6

1 – 1.9

6.89

6.13

>1.9

*

Self-clinching pilot pins

For metallic materials

Type TPS

Design
Self-clinching pilot pins with chamfered end

Material
Stainless steel 18/8 (AISI 300), passivated

Use
For sheet hardness up to HR

B

70

background image

www.kvt-fastening.com

31

Pem

®

d

3

d

1

d

2

L

64°   5°

3-D Data:

http://kvt.partcommunity.com

Order description

Stud

d

1

± 0.038

Hole

in sheet

+ 0.025

0

d

2

± 0.1

d

3

± 0.25

sm

min.

sm

Min. distance

hole to edge

MPP-1MM-L

1

1.05

0.70

1.60

0.5

2.05

MPP-1.5MM-L

1.5

1.55

1.03

2.24

0.5

2.60

MPP-2MM-L

2

2.05

1.36

3.02

0.5

4.40

Order description

Length code “L”

(± 0.15)

MPP-1MM-L

2

3

4

5

MPP-1.5MM-L

3

4

5

6

8

MPP-2MM-L

4

5

6

8

10

Miniature self-clinching

pilot pins

For metallic materials

Type MPP

Material
Hardened stainless steel (A286)

Use
Special pins for use in sheet hardness
up to HR

B

92

0UZ[HSSH[PVU

sm

background image

www.kvt-fastening.com

32

t

L

1

a

d

2

d

1

0UZ[HSSH[PVU

K

ZT

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.13

0

d

2

± 0.25

d

3

max.

a

max.

t

max.

sm

min.

sm

Min. distance

hole to edge

Steel, zincpla-

ted, colorless

passivated

Stainless steel,

passivated

HFH-M5-L

HFHS-M5-L

M5

5.00

7.8

5.1

2.7

1.14

1.3

10.7

HFH-M6-L

HFHS-M6-L

M6

6.00

9.4

6.1

2.8

1.27

1.5

11.5

HFH-M8-L

HFHS-M8-L

M8

8.00

12.5

8.1

3.5

1.78

2.0

12.7

HFH-M10-L

HFHS-M10-L

M10

10.00

15.7

10.1

4.1

2.29

2.3

13.7

Order description

Length code “L

1

(± 0.4)

Steel, zincpla-

ted, colorless

passivated

Stainless steel,

passivated

HFH-M5-L

1

HFHS-M5-L

1

15

20

25

30

35

40

50

HFH-M6-L

1

HFHS-M6-L

1

15

20

25

30

35

40

50

HFH-M8-L

1

HFHS-M8-L

1

15

20

25

30

35

40

50

HFH-M10-L

1

HFHS-M10-L

1

15

20

25

30

35

40

50

Self-clinching

high-strength studs

For metallic materials

Types HFH, HFHS

Design
Self-clinching threaded studs for extremely high
torque-out and pull-through resistance

Material
Type HFH:    Steel, hardened, zinc-plated, colorless

passivated (other surface treatments
upon request)

Type HFHS:   Stainless steel 18/8 (AISI 300),

passivated

Use
Type HFH:  For sheet hardness up to HR

B

85

Type HFHS:  For sheet hardness up to HR

B

70

Performance data, see the technical data on
page 67

background image

www.kvt-fastening.com

33

Pem

®

t

L

a

ca. 45°

d

2

d

4

1

L

2

0UZ[HSSH[PVU

K

ZT

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

d

4

± 0.13

d

3

L

2

± 0.25

Steel, zinc-plated,

colorless passivated

Stainless steel,

passivated

HFHD-M5-L

HFHDS-M5-L

M5

3.66

5.1

1.78

HFHD-M6-L

HFHDS-M6-L

M6

4.37

6.1

2.03

HFHD-M8-L

HFHDS-M8-L

M8

6.05

8.1

2.67

HFHD-M10-L

HFHDS-M10-L

M10

7.72

10.1

3.43

Self-clinching

high-strength studs

For metallic materials

Types HFHD, HFHDS

Design
Self-clinching threaded studs similar to HFH and
HFHS with a dog point lead-in option for automatic
installation

Material
Type HFHD:    Steel,  hardened,  zinc-plated,

colorless passivated, (other surface
treatments upon request)

Type HFHDS:  Stainless steel 18/8 (AISI 300),

passivated

Use
Type HFHD:  For sheet hardness up to HR

B

85

Type HFHDS: For sheet hardness up to HR

B

70

Note
L

1

:   For the overall length, take into account the

length of the standard designs for HFH and
HFHS. This is also valid for the dimensions d

2

,

sm, a and t on page 32.

Performance data, see the technical data on page 67

Alternate dog point – MAThread

®

upon request

HFHD studs can also be manufactured with a
MAThread

®

dog point upon request.

Anti cross-threading design allows the threads to
self-align and the use of shorter lengths.
The thread of the assembly nut already grips when it
comes into contact with the MAThread

®

. Saves weight.

background image

www.kvt-fastening.com

34

t

L

1

a

d

2

d

1

0UZ[HSSH[PVU

K

ZT

Countersink with
an anvil of 0.3 x 90º
for sheet thickness
< 1.5 mm

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.13

0

d

2

± 0.25

d

3

a

max.

t

max.

sm

min.

sm

Min. distance

hole to edge

HFE-M5-L

M5

5.00

9.60

5.1

2.6

1.35

1.0

10.0

HFE-M6-L

M6

6.00

11.35

6.1

2.8

1.52

1.0

11.5

HFE-M8-L

M8

8.00

15.30

8.1

3.3

2.13

1.5

14.5

Order description

Length code “L

1

(± 0.4)

HFE-M5-L

1

15

20

25

30

35

40

50

HFE-M6-L

1

15

20

25

30

35

40

50

HFE-M8-L

1

15

20

25

30

35

40

50

Self-clinching

high-strength studs

For metallic materials

Type HFE

Design
Self-clinching threaded studs for thin sheets such
as type HFH with a larger head diameter for higher
pull-through resistance.

Material
Steel, hardened, zinc-plated, colorless passivated
(other surface treatments upon request)

Use
For sheet hardness up to HR

B

85

Performance data, see the technical data on
page 68

background image

www.kvt-fastening.com

35

Pem

®

t

L

a

ca. 45°

d

2

d

4

1

L

2

Installation

d

3

sm

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

d

4

± 0.13

0

d

3

L

2

± 0.25

HFED-M5-L

M5

3.66

5.1

1.78

HFED-M6-L

M6

4.37

6.1

2.03

HFED-M8-L

M8

6.05

8.1

2.67

Self-clinching

high-strength studs

For metallic materials

Type HFED

Design
Self-clinching studs for thin sheets such as type
HFHD with but a larger head diameter for higher
pull-through resistance.

Material
Steel, hardened, zinc-plated, colorless passivated
(other surface treatments upon request)

Use
For sheet hardness up to HR

B

85

Note
L

1

:   For the overall length, take into account the

length of the standard design for HFE. This is
also valid for the dimensions d2, sm, a and t on
page 34.

Performance data, see the technical data on page 68

Alternate dog point – MAThread

®

upon request

HFED studs can also be manufactured with a
MAThread

®

dog point upon request.

Anti cross-threading design allows the threads to
self-align and the use of shorter lengths.
The thread of the assembly nut already grips when it
comes into contact with the MAThread

®

. Saves weight.

background image

www.kvt-fastening.com

36

L

d

2

d

1

a

SW

h

d

4

P 0672

SW

h

d

4

P 1472

SW

h

d

4

P 1596

0UZ[HSSH[PVU

sm

d

3

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

± 0.4

d

3

a

max.

sm

min.

sm

L

± 0.4

Min. distance

hole to edge

YQE-12958

5 x 1.6

5.20

6.50

5.2

4.0

1.0

17.5

7.2

YQE-15201

5 x 1.6

5.20

6.50

5.2

4.0

1.0

15.2

7.2

Selection of plastic nuts for fastening

Order description

Material

SW

d

4

h

P 0672

POM

10

16

10.0

P 1472

PA 6 30% GF

10

12

6.5

P 1596

PA 66 30% GF

10

18

11.0

Coarse-thread

self-clinching studs

For metallic materials

Type coarse-thread

Material
steel, zinc-plated, colorless passivated

Use
For sheet hardness up to HR

B

80

Other lengths upon request

background image

www.kvt-fastening.com

37

Pem

®

l

d

2

d

3

L

d

1

h

1,6

K

)SPUKOVSL
KLW[O

_

3TT

0UZ[HSSH[PVU

* Availabe upon request

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Blind hole

in sheet

+ 0.08

0

Blind hole

depth

x

min.

d

2

max.

d

3

± 0.25

d

4

h

max.

sm

min.

sm

Min.

distance

hole to edge

Aluminum

Stainless steel,

passivated

CHA-M3-L

CHC-M3-L

M3

4.40

1.10

4.35

5.21

3.4

1.04

1.6

4.0

CFHA-M3-L

CFHC-M3-L

1.91

1.80

2.4

CHA-M4-L

CHC-M4-L

M4

7.40

1.10

7.35

8.33

4.4

1.04

1.6

5.6

CFHA-M4-L

CFHC-M4-L

1.91

1.80

2.4

CFHA-M5-L

CFHC-M5-L

M5

7.95

1.91

7.90

8.89

5.4

1.80

2.4

6.4

CFHA-M6-L

CFHC-M6-L

M6*

8.75

1.91

8.72

9.80

6.4

1.80

2.4

7.5

Order description

Length code “L”

(± 0.4)

Aluminum

Stainless steel,

passivated

CHA-M3-L

CFHA-M3-L

CHC-M3-L

CFHC-M3-L

6

8

10

12

16

20

CHA-M4-L

CFHA-M4-L

CHC-M4-L

CFHC-M4-L

6

8

10

12

16

20

25

CFHA-M5-L

CFHC-M5-L

10

12

16

20

25

CFHA-M6-L

CFHC-M6-L

16

20

25

Concealed-head

self-clinching studs

For metallic materials

Types CHA, CHC, CFHA, CFHC

Design
For invisible installation, especially for rating plates,
front panels and membrane keyboards

Material
Types CHA, CFHA:  Aluminum
Types CHC, CFHC:   Stainless steel 18/8 (AISI 300),

passivated

Use
Types CHA, CFHA:  For sheet hardness up to HR

B

50

Types CHC, CFHC: For sheet hardness up to HR

B

70

Note

n

Hole of mating panel to be max. d

1

+0.5 mm

n

Order a double-ended, two-flute HSS centercut-

ting end mill for the corresponding diameter

background image

www.kvt-fastening.com

38

L

t

d

1

d

2

d

3

s

h

K

)SPUKOVSL
KLW[O

_

3TT

0UZ[HSSH[PVU

3-D Data:

http://kvt.partcommunity.com

Order

description

Thread

d

1

Blind hole

in sheet

+ 0.08

0

Blind hole

depth

x

min.

d

2

max.

d

3

max.

d

4

sw

± 0.13

t

min.

h

max.

sm

min.

sm

Min.

distance

hole to

edge

CSS-M3-L

M3

5.40

1.10

5.39

4.20

4.33

6.35

5.0

1.04

1.6

4.8

CSOS-M3-L

1.91

1.83

2.4

CSS-M4-L

M4

7.95

1.10

7.90

6.23

6.36

8.74

6.5

1.04

1.6

6.4

CSOS-M4-L

1.91

1.83

2.4

CSOS-M5-L

M5

8.75

1.91

8.72

7.37

7.50

9.53

9.6

1.83

2.4

7.2

CSOS-M6-L

M6

9.90

1.91

9.89

9.00

9.13

11.11

9.6

1.83

2.4

9.5

Order description

Length code “L”

(+ 0.05

– 0.13)

CSS-M3-L

4

6

8

10

12

CSOS-M3-L

4

6

8

10

12

CSS-M4-L

4

6

8

10

12

16

20

CSOS-M4-L

4

6

8

10

12

16

20

CSOS-M5-L

Upon request

CSOS-M6-L

Upon request

Concealed-head

self-clinching standoffs

For metallic materials

Types CSS, CSOS

Design
For invisible installation, especially for rating plates,
front panels and membrane keyboards

Material
Stainless steel 18/8 (AISI 300), passivated

Use
For sheet hardness up to HR

B

70

Note

n

Standoffs with length > 10 mm do have blind end

n

Order a double-ended, two-flute HSS center-

cutting end mill for the corresponding diameter

Head designs

background image

www.kvt-fastening.com

39

Pem

®

L

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

max.

d

3

d

4

+ 0.2

0

L

+ 0.05

– 0.13

sm

min.

sm

Min. distance

hole to edge

DSOS-M3-6.35

M3

4.20

4.19

4.92

4.3

6.35

1.0

3.2

DSOS-M3-7

7.00

DSOS-440-250

UNC 4-40

4.20

4.19

4.92

4.3

6.35

1.0

3.2

DSOS-440-275

7.00

Technical data

Tightening torque

for mating screw

Nm

1 mm Aluminum

Installation

N

Pushout

N

Torque-out

Nm

max. 0.44

~ 4500

~ 223

~ 1.1

Tightening torque

for mating screw

Nm

1 mm Steel

Installation

N

Pushout

N

Torque-out

Nm

max. 0.44

~ 5800

~ 334

~ 1.1

Adapt the size of the cut-out and hole
spacing to the plug-in connector

Self-clinching standoffs

For metallic materials

Type DSOS

Design
Especially for connector systems (plug and socket
connectors)

Material
Stainless steel (AISI 300), passivated

Use
For sheet hardness up to HR

B

70

Note
Screws with UNC 4-40 threads upon request

0UZ[HSSH[PVU

background image

www.kvt-fastening.com

40

L

b

d

1

d

2

d

3

sw

L

b

d

1

d

2

d

3

sw

K

TPU3

ZT

0UZ[HSSH[PVU

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

± 0.13

d

3

0

– 0.13

d

4

sw

sm

min.

sm

Min. distance

hole to edge

Steel, zincpla-

ted, colorless

passivated

Stainless steel,

passivated

SO-M2-L

M2

4.20

2.50

4.20

4.4

4.8

1.0

6.0

SO-M2.5-L

SOS-M2.5-L

M2.5

4.20

3.20

4.20

4.4

4.8

1.0

6.0

SO-M3-L

SOS-M3-L

M3

4.20

3.20

4.20

4.4

4.8

1.0

6.0

SO-3.5 M3-L

SOS-3.5 M3-L

5.40

5.39

5.6

6.4

6.8

SO-M4-L

SOS-M4-L

M4

7.20

4.80

7.12

7.3

7.9

1.3

8.0

SO-M5-L

SOS-M5-L

M5

7.20

5.35

7.12

7.3

7.9

1.3

8.0

Order description

Length code “L”

(+ 0.05

– 0.13)

Steel, zincpla-

ted, colorless

passivated

Stainless steel,

passivated

SO-M2-L

4

6

8

10

12

SO-M2.5-L

SOS-M2.5-L

4

6

8

10

12

SO-M3-L

SOS-M3-L

3

4

5

6

7

8

10

12

14

16

18

SO-3.5 M3-L

SOS-3.5 M3-L

3

4

5

6

7

8

10

12

14

16

18

SO-M4-L

SOS-M4-L

3

4

6

8

10

12

14

16

18

20

22

25

SO-M5-L

SOS-M5-L

4

6

8

10

12

14

16

18

20

22

25

Threadless length b ±0.25

4

4

4

8

8

8

11

11

Self-clinching standoffs

For metallic materials

Types SO, SOS

Material
Type SO:     Steel, hardened, zinc-plated, colorless

passivated

Type  SOS:   Stainless steel 18/8 (AISI 303), passivated
Aluminum upon request

Use
Type SO:  For sheet hardness up to HR

B

80

Type SOS: For sheet hardness up to HR

B

70

Type SO4 for use in sheets > HR

B

80

Performance data, see the technical data on
page 69

background image

www.kvt-fastening.com

41

Pem

®

L

b

d

1

d

2

d

3

sw

L

b

d

1

d

2

d

3

sw

K

TPU3

ZT

0UZ[HSSH[PVU

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

± 0.13

d

3

0

– 0.13

d

4

sw

sm

min.

sm

Min. distance

hole to edge

SO4-M3-L

M3

4.20

3.20

4.20

4.4

4.8

1.0

6.0

SO4-3.5-M3-L

5.40

5.39

5.6

6.4

6.8

SO4-M4-L

M4

7.20

4.80

7.12

7.3

7.9

1.3

8.0

SO4-M5-L

M5

7.20

5.35

7.12

7.3

7.9

1.3

8.0

Order description

Length code “L”

(+ 0.05

– 0.13)

SO4-M3-L

3

4

6

8

10

12

14

16

18

SO4-3.5-M3-L

3

4

6

8

10

12

14

16

18

SO4-M4-L

4

6

8

10

12

14

16

18

20

22

25

SO4-M5-L

4

6

8

10

12

14

16

18

20

22

25

Threadless length b ±0.25

0

0

0

0

4

4

4

8

8

8

11

11

Self-clinching standoffs

For stainless steel and metallic materials

Type SO4

Material
Hardened stainless steel (AISI 400), passivated

Use
For sheet hardness up to HR

B

88

background image

www.kvt-fastening.com

42

d

2

L

d

3

45°

d

4

0UZ[HSSH[PVU

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

max.

d

3

nom.

d

4

sm

min.

sm

Min. distance

hole to edge

MSO4-M1-L

M1

2.41

2.39

3.18

2.46 – 2.51

0.4

2.3

MSO4-M1.2-L

M1.2

2.41

2.39

3.18

2.46 – 2.51

0.4

2.3

MSO4-M1.4-L

M1.4

2.41

2.39

3.18

2.46 – 2.51

0.4

2.3

MSO4-M1.6-L

M1.6

2.41

2.39

3.18

2.46 – 2.51

0.4

2.3

MSO4-M2-L

M2

3.18

3.16

3.96

3.22 – 3.27

0.4

3.0

Order description

Length code “L”

(+ 0.05

– 0.08)

MSO4-M1-L

2

3

MSO4-M1.2-L

2

3

MSO4-M1.4-L

2

3

MSO4-M1.6-L

2

3

MSO4-M2-L

2

3

Miniature

self-clinching standoffs

For stainless steel and metallic materials

Type MSO4

Material
Hardened stainless steel (AISI 400), passivated

Use
For sheet hardness up to HR

B

88

Note

n

Thread tolerance M1 to M1.4 according to

ISO 1501, 4H6

n

Thread tolerance M1.6 and M2 according to

ASME B1.13M, 6H

background image

www.kvt-fastening.com

43

Pem

®

L

t

d

1

d

2

sw

L

t

d

1

d

2

sw

d

3

min. L

sm

Installation

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

0

– 0.13

d

3

sw

sm

min.

sm

Min. distance

hole to edge

Steel, zincpla-

ted, colorless

passivated

Stainless steel,

passivated

BSO-M3-L

BSOS-M3-L

M3

4.20

4.20

4.4

4.8

1.0

6.0

BSO-3.5 M3-L

BSOS-3.5 M3-L

5.40

5.39

5.6

6.4

6.8

BSO-M4-L

BSOS-M4-L

M4

7.20

7.12

7.3

7.9

1.3

8.0

BSO-M5-L

BSOS-M5-L

M5

7.20

7.12

7.3

7.9

1.3

8.0

Order description

Length code “L”

(+ 0.05

– 0.13)

Steel, zincpla-

ted, colorless

passivated

Stainless steel,

passivated

BSO-M3-L

BSOS-M3-L

6

8

10

12

14

16

18

20

22

25

BSO-3.5 M3-L

BSOS-3.5 M3-L

6

8

10

12

14

16

18

20

22

25

BSO-M4-L

BSOS-M4-L

6*

8

10

12

14

16

18

20

22

25

BSO-M5-L

BSOS-M5-L

8

10

12

14

16

18

20

22

25

Thread depth t

min.

3.2

4

4

5

6.5

6.5

9.5

9.5

9.5

9.5

* Availabe upon request

Blind self-clinching standoffs

For metallic materials

Types BSO, BSOS

Material
Type BSO:    Steel, hardened, zinc-plated, colorless

passivated

Type BSOS:   Stainless steel 18/8 (AISI 303),

passivated

Aluminum upon request

Use
Type BSO:  For sheet hardness up to HR

B

80

Type BSOS:  For sheet hardness up to HR

B

70

Type BSO4 intended for use in sheets > HR

B

80

Performance data, see the technical data on
page 69

background image

www.kvt-fastening.com

44

L

t

d

1

d

2

sw

L

t

d

1

d

2

sw

d

3

min. L

sm

Installation

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

0

– 0.13

d

3

sw

sm

min.

sm

Min. distance

hole to edge

BSO4-M3-L

M3

4.20

4.20

4.4

4.8

1.0

6.0

BSO4-3.5-M3-L

5.40

5.39

5.6

6.4

6.8

BSO4-M4-L

M4

7.20

7.12

7.3

7.9

1.3

8.0

BSO4-M5-L

M5

7.20

7.12

7.3

7.9

1.3

8.0

Order description

Length code “L”

(+ 0.05

– 0.08)

BSO4-M3-L

6

8

10

12

14

16

18

20

22

25

BSO4-3.5-M3-L

6

8

10

12

14

16

18

20

22

25

BSO4-M4-L

6

8

10

12

14

16

18

20

22

25

BSO4-M5-L

6

8

10

12

14

16

18

20

22

25

Thread depth t

min.

3.2

4

4

5

6.5

6.5

9.5

9.5

9.5

9.5

Blind self-clinching standoffs

For stainless steel and metallic materials

Type BSO4

Material
Hardened stainless steel (AISI 400), passivated

Use
For sheet hardness up to HR

B

88

background image

www.kvt-fastening.com

45

Pem

®

Extension in

open position

e.g. PEM

self-clinching nut

Carrier plate

for screw

connection

d

1

+ 2 mm

Montage

min. g

Nylon ring

3-D Data:

http://kvt.partcommunity.com

Order

description

Thread

d

1

Hole

in sheet

+ 0.08

0

g

± 0.4

h

2

± 0.64

d

2

max.

d

3

± 0.25

h

1

± 0.13

t

1

max.

t

2

nom.

Min.

distance

hole to edge

PFC2-M3-40

M3

6.75

6.4

0.0

6.71

7.92

1.83

9.14

13.72

6.35

PFC2-M3-62

9.5

3.2

PFC2-M4-50

M4

7.95

7.9

0.0

7.90

9.53

2.08

11.43

17.53

7.87

PFC2-M4-72

11.1

3.2

PFC2-M4-94

14.3

6.4

PFC2-M5-50

M5

8.75

7.9

0.0

8.72

10.31

2.08

11.47

17.53

8.63

PFC2-M5-72

11.1

3.2

PFC2-M5-94

14.3

6.4

PFC2-M6-60

M6

10.50

9.5

0.0

10.47

11.89

2.46

14.73

22.35

9.65

PFC2-M6-82

12.7

3.2

PFC2-M6-04

15.9

6.4

Type PFC2

Design

n

One-piece panel fastener, spring-loaded

n

Well suited as captive screw for the quick-

installation and disassembly of covers, flaps etc.

Material
Screw, self-clinching standoff and spring of stainless
steel 18/8 (AISI 300), passivated
Retaining Ring: Nylon, temperature limit 93°C

Use
For sheet hardness up to HR

B

70

Self-clinching

captive panel screws

For metallic materials

0UZ[HSSH[PVU

background image

www.kvt-fastening.com

46

d

3

a

t

2

d

g

1

t

1

d

2

h

3-D Data:

http://kvt.partcommunity.com

Order

description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

max.

d

3

± 0.25

a

max.

sm

min.

sm

g

± 0.64

h

± 0.64

t

1

nom.

t

2

nom.

Min.

distance

hole to

edge

PF11-M3-0

M3

5.56

5.54

10.59

0.92

0.92

4.32

0.00

7.87

11.43

7.11

PF11-M3-1

5.84

1.52

PF11-M3-2

7.37

3.05

PF11-M4-0

M4

7.92

7.90

13.06

0.92

0.92

5.84

0.00

11.43

16.26

8.38

PF11-M4-1

7.37

1.52

PF11-M4-2

8.89

3.05

PF11-M5-0

M5

7.92

7.90

13.06

0.92

0.92

5.84

0.00

11.43

16.26

8.38

PF11-M5-1

7.37

1.52

PF11-M5-2

8.89

3.05

PF11-M6-0

M6

9.53

9.50

14.61

0.92

0.92

7.37

0.00

13.46

20.07

11.68

PF11-M6-1

8.89

1.52

PF11-M6-2

10.41

3.05

Self-clinching

captive panel screws

For metallic materials

Type PF11

Design

n

One-piece panel fastener, spring-loaded, with

Phillips slot drive

n

Well suited as captive screw for the quick installa-

tion and disassembly of covers, flaps etc.

Material
Knurled knob:

Aluminum

Self-clinching standoff:  Steel, zinc-plated
Spring:

Stainless steel, passivated

Screw:

Hardened stainless steel
(AISI 400)

Use
For sheet hardness up to HR

B

80

Montage

d

1

+ 2 mm

min. g

sm

0UZ[HSSH[PVU

background image

www.kvt-fastening.com

47

Pem

®

t

1

d

3

h

2

g

d

1

t

2

d

2

h

1

a

3-D Data:

http://kvt.partcommunity.com

Order

description

Thread

d

1

Hole

in sheet

+ 0.08

0

a

max.

d

2

max.

d

3

± 0.25

sm

min.

sm

g

± 0.64

h

t

± 0.65

h

2

± 0.13

t

1

nom.

t

2

nom.

Min.

distance

hole to

edge

PFHV-M3-0

M3

5.50

0.92

5.49

6.95

0.92

5.55

0.0

2.03

6.69

11.25

5.8

PFHV-M3-1

7.56

1.9

PFHV-M4-0

M4

6.40

0.92

6.38

7.85

0.92

6.59

0.0

2.79

8.50

14.10

6.7

PFHV-M4-1

9.39

2.7

Self-clinching

captive panel screws

For metallic materials

Type PFHV

Design

n

One-piece panel fastener, spring-loaded, with

Phillips slot drive

n

Well suited as captive screw for the quick

installation and disassembly of covers, flaps etc.

Material
Screw and self-clinching standoff in steel,
nickel-plated

Use
For sheet hardness up to HR

B

60

Montage

d

1

+ 2 mm

min. g

sm

0UZ[HSSH[PVU

background image

www.kvt-fastening.com

48

A

B

C

L

+ 3,18 mm

d

2

d

1

L

t

a

SCBJ

d

2

d

1

L

t

a

SCB

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in sheet

+ 0.08

0

d

2

± 0.25

a

nom.

Min. distance

hole to edge

SCBJ

SCB

SCBJ-M3-L

SCB-M3-L

M3

3.0

6.60

2.03

3.30

SCBJ-M4-L

SCB-M4-L

M4

4.0

8.28

2.03

5.00

SCBJ

Order description

SCBJ

Length code “L”

(± 0.4)

SCBJ-M3-L

6.0

10.0

12.0

SCBJ-M4-L

6.0

10.0

12.0

Thread length t

3.7

7.7

9.7

SCB

Order description

SCB

Length code “L”

(± 0.4)

SCB-M3-L

12.0

SCB-M4-L

12.0

Thread length t

3.3

Punch and anvil dimensions

Thread

A

B

C

M3

6.86 – 7.11

1.85 – 1.88

3.03 – 3.11

M4

8.53 – 8.79

1.85 – 1.88

4.03 – 4.11

Spinning clinch bolts

For metallic materials

Types SCBJ, SCB

Design
Captive bolt, no additional components required

Material
Steel, hardened, zinc-plated, colorless passivated

Use
For sheet hardness up to HR

B

80, sheet thickness

at least 1.0 mm

background image

www.kvt-fastening.com

49

Pem

®

TPU

K

ZT

K

ZT

TPU

—

;VSLYHUJL

—

—

TH_

—

3

9LTV]HISLWHULS

)HZLWHULS

min.

2,5

d

2

sm

2

d

3

sm

1

min.

6,6

± 0,1

Toleranz

3,58

± 0,13

4,78

±

0,13

max 5,39

∅ 6,35

± 0,13

L

1

Bewegliche Platte

Grundplatte

3

0UZ[HSSH[PVU

3-D Data:

http://kvt.partcommunity.com

Order description

Nominal

Base

panel

Removable

panel

L

1

+ 0.13

0

L

2

sm

1

min.

sm

sm

2

sm

Aluminum

Stainless steel,

passivated

Steel, zincpla-

ted, colorless

passivated

Hole d

2

+ 0.08

0

Hole d

3

+ 0.08

0

SSA-4MM-8

SSC-4MM-8

SSS-4MM-8

4

5.40

4.0

8

13

1.0

1.0 – 1.8

SSA-4MM-10

SSC-4MM-10

SSS-4MM-10

10

15

SSA-4MM-12

SSC-4MM-12

SSS-4MM-12

12

17

SSA-4MM-14

SSC-4MM-14

SSS-4MM-14

14

19

SSA-4MM-16

SSC-4MM-16

SSS-4MM-16

16

21

SSA-4MM-18

SSC-4MM-18

SSS-4MM-18

18

23

SSA-4MM-20

SSC-4MM-20

SSS-4MM-20

20

25

SSA-4MM-22

SSC-4MM-22

SSS-4MM-22

22

27

SSA-4MM-25

SSC-4MM-25

SSS-4MM-25

25

30

Self-clinching spacers

For metallic materials

Types SSA, SSC, SSS

Design
Spacers are used for the quick attachment and
removal of PC boards, covers etc.

Material
Type SSA:   Aluminum
Type SSC:    Stainless steel (AISI 400), passivated
Type SSS:  Steel, zinc-plated, colorless passivated

Use
Type SSA:  For sheet hardness up to HR

B

50

Type SSC:  For sheet hardness up to HR

B

70

Type SSS:  For sheet hardness up to HR

B

60

Forces

n

First on force of removable panel for

Type SSA = max. 58 N
Type SSC = max. 89 N
Type SSS = max. 89 N

n

First off force for

Type SSA = min. 13 N
Type SSC = min. 27 N
Type SSS = min. 27 N

n

15th off force for

Type SSA = min. 4 N
Type SSC = min. 9 N
Type SSS = min. 9 N

background image

www.kvt-fastening.com

50

L

d

4

t

d

5

d

1

a

d

2

K

S

TPU

0UZ[HSSH[PVU

3-D Data:

http://kvt.partcommunity.com

Order description

d

1

± 0.08

d

2

d

3

+ 0.08

0

d

4

max.

d

5

± 0.08

a

± 0.08

t

max.

SKC-61.5-L

4.5

6.35

5.5

5.39

2.51

1.73

2.75

Order description

Length code “L”

(   0

– 0.13)

SKC-61.5-L

6

8

10

12

14

16

18

20

22

25

Housing

PC board

Typ

Hole

in sheet

+ 0.08

0

sm

min.

sm

Mind. distance

hole to edge

Tolerance

for distance

to hole

Hole in PC board

Min. distance

hole to edge

Strength of

PC board

d

1

± 0.08

d

2

± 0.08

A

min.

SKC-61.5

5.40

1.0

6.6

± 0.13

3

5

3.75

4.1

1.45 – 1.62

4PUOVSL*3[VLKNL

/VSLPU7*IVHYK

4PUOVSL*3
[VLKNL

7*IVHYK

/V\ZPUN

/VSL

PUZOLL[

;VSLYHUJLMVY
OVSLKPZ[HUJL

K

(

K

Self-clinching spacers

For metallic materials

Type SKC

Design
Spacers are used for the quick attachment and
removal of PC boards, covers etc.

Material
Stainless steel 18/8 (AISI 300), passivated

Use
For sheet hardness up to HR

B

70

Ordering example

Housing thickness:  2 mm
Distance:

18 mm

Order reference:  SKC-61,5-20

background image

www.kvt-fastening.com

51

Pem

®

L

1

(L

2

)

d

1

d

2

B

A

sw

A

sm

d

3

0UZ[HSSH[PVU

Application example

3-D Data:

http://kvt.partcommunity.com

Order

description

d

1

0

– 0.04

Hole

in sheet

+ 0.08

0

d

2

0

– 0.05

d

3

sw

sm

min.

sm

L

1

± 0.25

(L

2

)

A

± 0.1

B

± 0.05

Min.

distance

hole to

edge

YQE-14928 29P

3.6

3.6

2.6

3.7

4.8

1.0

17.8

15.6

2.2

1.25

3.7

YQE-15324 29P

6.0

6.0

5.0

6.1

7.1

1.5

36.0

33.0

3.0

1.50

6.1

YQE-16180 29P

8.0

8.0

7.0

8.1

9.5

2.0

37.0

34.0

3.0

1.50

8.1

RADSOK

®

self-clinching

conducting pins

For metallic materials

Type RADSOK

®

Design
Self-clinching conducting pins designed especially
for the Radsok

®

high-current interconnect system

Material
Steel, silver-plated

Use
For sheet hardness up to HR

B

80

Additional sizes upon request

RADSOK

®

high-current interconnect system

Validated and approved according to AK test
guidelines for automotive plug-in connectors.
Further information and technical details can be
viewed at the website of the German licensee,
Amphenol-Tuchel Electronics GmbH, at
www.amphenol.info

background image

www.kvt-fastening.com

52

sw

b

L

1

L

2

a

Application example

sm

d

0UZ[HSSH[PVU

3-D Data:

http://kvt.partcommunity.com

Order description

Plate

a x b

Hole

in sheet

+ 0.08

0

d

L

1

L

2

± 0.5

sw

sm

min.

sm

Min.

distance

hole to edge

Steel,

tin-plated

Stainless steel,

passivated

KVT-6.3-14

KVT-S-6.3-14

6.3 x 0.8

6.4

6.4

14.0

10.0

8.0

0.8

7.2

Self-clinching flat contact pins

For metallic materials

Type grounding post

Material
Type KVT:  Steel, tin-plated
Type KVT-S:  Stainless steel

Use
Type KVT:  For sheet hardness up to HR

B

80

Type KVT-S:  For sheet hardness up to HR

B

88

Note
Pin dimensions according to DIN 46342.

Take advantage of the benefits of
self-clinching technology for conventional
grounding connections, too.

background image

www.kvt-fastening.com

53

Pem

®

a

d

g

e

c

b

L

sm

0UZ[HSSH[PVU

3-D Data:

http://kvt.partcommunity.com

Order

description

Hole

in sheet

+ 0.05

– 0.03

a

± 0.08

b

± 0.15

c

± 0.15

d

± 0.15

e

± 0.15

g

± 0.15

L

± 0.08

sm

min.

sm

TD-40-4

6.35 x 3.18

6.25

1.40

1.65

4.06

7.82

3.81

3.07

1.0 – 1.3

TD-60-6

7.93 x 4.75

7.82

1.91

1.65

5.21

9.40

4.57

4.67

1.0 – 1.8

TD-175-12

12.70 x 9.53

12.60

3.30

2.40

9.14

14.28

7.24

9.42

1.0 – 3.2

Recommended anvil dimensions

PEMSERTER

®

anvil

Order description

D

min.

B

± 0.03

8006136

4.45

6.36

8006137

5.08

7.95

8006138

7.62

12.73

Montage

3

4PU

)

+

7\UJO

(U]PS

(U]PS

Self-clinching cable tie mounts

For metallic materials

Type TD

Design

n

Ring for mounting cable ties or similar items

n

Enables flush, closed press-in assembly. This

enables closed magnetic shielding in the
housing (especially for high frequencies)

Material
Sintered steel (4600 A), zinc-plated, colorless
passivated

Use
For sheet hardness up to HR

B

60

background image

www.kvt-fastening.com

54

sm

G

F

E

C

A

D

∅B

Top view, RAA

squeezed into sheet

H

J

L

Side view, with side panel screwed

on, with thread-forming screws

3-D Data:

http://kvt.partcommunity.com

Order

description

For

screw

threads

A

± 0.08

B

± 0.1

C

nom.

D

nom.

E

± 0.15

F

± 0.15

G

nom.

Min.

distance

to edge

H

Min.

distance

to edge

J

sm

min.

sm

L

± 0.08

Hole

in sheet

+ 0.05

– 0.03

RAA M3 – 7 – 4

M3 x 0.5

7.89

2.77

6.35

3.18

9.42

7

9.27

1.02

9.1

1.0

3.89

8 x 4

RAA M3 – 7 – 6

10.7

5.89

8 x 6

RAA M4 – 9 – 7

M4 x 0.7

9.89

3.68

8.89

3.18

11.43

9

12.19

1.02

14.7

1.0

6.89

10 x 7

RAA M4 – 9 – 9

16.3

8.89

10 x 9

Recommended anvil dimensions

PEMSERTER

®

anvil

order

description

Screw

Anvil dimensions

P

± 0.03

M

± 0.03

T

± 0.1

R

min.

8002713

M3

6.53

8.02

2.54

10.8

8002714

M4

9.07

10.03

2.54

12.7

Anvil

+0,05

0

min

L

P

M

Punch

Sheet

Anvil

R

T

0UZ[HSSH[PVU

Self-clinching

right-angle fasteners

For metallic materials

Type RAA

Material
Aluminum (6061-T6)

Use
For sheet hardness up to HR

B

45

background image

www.kvt-fastening.com

55

Pem

®

sm

G

F

E

C

A

D

Top view, RAS

squeezed into sheet

H

J

L

Side view, with side panel

screwed on

3-D Data:

http://kvt.partcommunity.com

Order

description

For

screw

threads

A

± 0.08

C

nom.

D

nom.

E

± 0.15

F

± 0.15

G

nom.

Min.

distance

to edge

H

Min.

distance

to edge

J

sm

min.

sm

L

± 0.08

Hole

in sheet

+ 0.05

– 0.03

RAS M3 – 7 – 3

M3 x 0.5

7.89

6.35

3.18

9.47

7

9.78

1.02

7.6

1.0

2.89

8 x 3

RAS M3 – 7 – 4

9.1

3.89

8 x 4

RAS M3 – 7 – 6

10.7

5.89

8 x 6

RAS M4 – 9 – 4

M4 x 0.7

9.89

8.89

3.18

11.48

9

13.21

1.02

10.0

1.0

3.89

10 x 4

RAS M4 – 9 – 7

14.7

6.89

10 x 7

RAS M4 – 9 – 9

16.3

8.89

10 x 9

Recommended anvil dimensions

PEMSERTER

®

anvil

order

description

Screw

Anvil dimensions

P

± 0.03

M

± 0.03

T

± 0.1

R

min.

8002713

M3

6.53

8.02

2.54

10.8

8002714

M4

9.07

10.03

2.54

12.7

Anvil

+0,05

0

min

L

P

M

Punch

Sheet

Anvil

R

T

0UZ[HSSH[PVU

Self-clinching

right-angle fasteners

For metallic materials

Type RAS

Material
Steel, zinc-plated, colorless passivated

Use
For sheet hardness up to HR

B

60

background image

www.kvt-fastening.com

56

L

d

1

d

2

d

3

sm

1

sm

2

Sheet 1

Sheet 2

0UZ[HSSH[PVU

3-D Data:

http://kvt.partcommunity.com

Order description

Sheet 1

Sheet 2

d

1

max.

d

2

max.

d

3

max.

L

max.

Min.

distance

hole to

edge

Steel, zinc-

plated, color-

less passivated

Hardened

stainless

steel

sm

1

± 0.08

Hole

+ 0.08

0

sm

2

min.

Hole

+ 0.08

0

SF-3-0.8

0.8

3.0

0.8

2.5

2.98

2.48

3.53

1.50

2.54

SF-3-1.0

SFP-3-1.0

1.0

3.0

1.0

2.5

2.98

2.48

3.76

1.90

2.54

SF-3-1.2

SFP-3-1.2

1.2

3.0

1.2

2.5

2.98

2.48

3.76

2.31

2.54

SF-3-1.6

SFP-3-1.6

1.6

3.0

1.6

2.5

2.98

2.48

3.76

3.12

2.54

SF-5-0.8

0.8

5.0

0.8

4.0

4.98

3.97

5.56

1.50

3.56

SF-5-1.0

1.0

5.0

1.0

4.0

4.98

3.97

5.56

1.90

3.56

SFP-5-1.0

1.0

5.0

1.0

4.5

4.98

4.47

5.56

1.90

3.56

SF-5-1.2

1.2

5.0

1.2

4.0

4.98

3.97

5.56

2.31

3.56

SFP-5-1.2

1.2

5.0

1.2

4.5

4.98

4.47

5.56

2.31

3.56

SF-5-1.6

1.6

5.0

1.6

4.0

4.98

3.97

5.56

3.12

3.56

SFP-5-1.6

1.6

5.0

1.6

4.5

4.98

4.47

5.56

3.12

3.56

SpotFast

®

self-clinching fasteners

For stainless steel and metallic materials

Types SF, SFP

Design
For flush permanent joining of two sheets

Material
Type SF:  Steel, zinc-plated, colorless passivated
Type SFP:   Hardened stainless steel,

precipitation-hardened (martensitic)

Use
Type SF:  For sheet hardness up to HR

B

80

Type SFP:  For sheet hardness up to HR

B

88

background image

www.kvt-fastening.com

57

Pem

®

Sheet 1

Sheet 2

representation

as a blind hole

d

3

d

2

d

1

L

2

L

1

t

Order description

Sheet 1

Sheet 2

L

1

± 0.075

L

2

± 0.025

d

1

± 0.05

d

2

max.

d

3

± 0.1

t

± 0.1

Min.

distance

hole to

edge

Aluminum

sm

1

Hole

± 0.05

sm

2

min.

Hole

- 0.05

TA-10-025

0.20 - 0.28

1.47

0.89

1.02

0.61

0.406

1.30

0.89

2

0.20

1

TA-10-050

0.48 - 0.56

1.47

0.89

1.02

0.61

0.686

1.30

0.89

2

0.20

1

TA-10-075

0.71 - 0.79

1.47

0.89

1.02

0.61

0.914

1.30

0.89

2

0.20

1

Type TA

Design
For permanent joining of two sheets

Material
Aluminum

Use
For sheet hardness up to HR

B

45

Note
Minimum sheet thickness of sheet 2 (sm

2

) blind

hole 0,89 mm – thru-hole 0,5 mm

TackPin™ self-clinching fasteners

For metallic materials

0UZ[HSSH[PVU

background image

www.kvt-fastening.com

58

min.

2,5

d

2

sm

2

d

3

sm

1

min.

5,6

± 0,1

Toleranz

3,58

±0,13

4,80

±

0,13

ca. 0,51

±0,13

5,74

±

0,08

∅ 6,35

±0,13

L

1

Bewegliche Platte

Grundplatte

3-D Data:

http://kvt.partcommunity.com

Order description

Nominal

Base panel

Removable panel

L

1

± 0.13

L

2

min.

sm

1

min.

sm

sm

2

sm

Hole d

2

+ 0.08

0

Hole d

3

+ 0.08

0

KSSB-4MM-8

4

5.40

4.00

8

13

1.25

1.0 – 1.8

KSSB-4MM-10

10

15

KSSB-4MM-12

12

17

KSSB-4MM-14

14

19

KSSB-4MM-16

16

21

KSSB-4MM-18

18

23

KSSB-4MM-20

20

25

KSSB-4MM-22

22

27

KSSB-4MM-25

25

30

min.

2,5

d

2

sm

2

d

3

sm

1

min.

5,6

± 0,1

Tolerance

3,58

±0,13

4,80

±

0,13

ca. 0,51

±0,13

5,74

±

0,08

∅ 6,35

±0,13

L

1

Removable panel

Base panel

Self-clinching spacers

For plastics

Type KSSB

Design
Spacers are used for the quick attachment and
removal of PC boards, components etc.

Material

n

Non-plated brass (CDA 353)

n

Brass with surface treatment upon request

Use
For PC boards or plastics up to HR

B

65

(base panel)

Forces

n

Max. first on force of removable panel = 57.7 N

n

Min. first off force = 13.3 N

n

Min. 15th off force = 4.4 N

∅ 5,49

+ 0,08

L

2

Installation

background image

www.kvt-fastening.com

59

Pem

®

L

d

1

d

2

a

h

k

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Holein

plastic

+ 0.08

0

d

2

± 0.25

d

3

+ 0.1

0

k

± 0.13

a

max.

h

max.

sm

min.

sm

Min. distance

hole to edge

KFH-M2.5-L

M2.5

2.6

3.85

2.6

0.51

2.6

1.65

1.53

2.8

KFH-M3-L

M3

3.0

4.58

3.1

0.51

2.3

1.65

1.53

3.8

KFH-M4-L

M4

4.2

5.74

4.1

0.51

2.3

1.65

1.53

5.1

KFH-M5-L

M5

5.0

6.60

5.1

0.51

2.3

1.65

1.53

5.3

Order description

Length code “L”

(±0.25)

KFH-M2.5-L

6

8

10

12

15

KFH-M3-L

6

8

10

12

15

18

KFH-M4-L

6

8

10

12

15

18

KFH-M5-L

6

8

10

12

15

18

Type KFH

Material
Phosphor bronze, tin-plated for good solderability

Use

n

For PC boards and other plastics to HR

B

55

(also for cast aluminum and magnesium)

n

When used in PC boards with plated thru-holes,

increase the hole dimension before thru-hole
plating process by 0.13 mm (– 0.03 mm)

Additional lengths upon request

Broaching studs

For plastics

Installation

d

3

sm

min.

L

background image

www.kvt-fastening.com

60

m

h

d

1

d

2

d

3

sm

Installation

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

Hole

in plastic

+ 0.08

0

d

2

± 0.08

d

3

± 0.13

m

± 0.13

h

max.

sm

min.

sm

Min. distance

hole to edge

Steel, tin-plated

Stainless steel,

passivated

KF2-M2

KFS2-M2

M2

3.70

4.19

5.56

1.5

1.53

1.53

4.2

KF2-M2.5

KFS2-M2.5

M2.5

4.20

4.68

5.56

1.5

1.53

1.53

4.4

KF2-M3

KFS2-M3

M3

4.20

4.68

5.56

1.5

1.53

1.53

4.4

KF2-M4

KFS2-M4

M4

6.40

6.81

8.74

2.0

1.53

1.53

6.4

KF2-M5

KFS2-M5

M5

6.90

7.37

9.53

3.0

1.53

1.53

7.1

Broaching nuts

For plastics

Types KF2, KFS2

Material
Type KF2:   Steel, tin-plated
Type KFS2:   Stainless steel 18 / 8 (AISI 300),

passivated

Use

n

PC boards, fiberglass, phenol resins, nylon, epoxy,

acrylic glass etc. (also for cast aluminum and
magnesium)

n

Type KF2 up to HR

B

60

n

Type KFS2 up to HR

B

70

n

When used in PC boards with plated thru-holes,

increase the hole dimension before thru-hole
plating process by 0.13 mm (– 0.03 mm)

background image

www.kvt-fastening.com

61

Pem

®

sm

Installation

h

d

1

d

2

d

3

L

h

d

1

d

2

d

3

L

t

With thru-hole

∅ 3,6 oder 4,2 mm

With threads

3-D Data:

http://kvt.partcommunity.com

Order description

Thread or

thru-hole

d

1

Hole

in plastic

+ 0.08

0

d

2

± 0.08

d

3

± 0.13

h

max.

sm

min.

sm

Min. distance,

hole to edge

Steel,

tin-plated

Stainless steel,

passivated

KFE-M3-L

KFSE-M3-L

M3

4.20

4.68

5.56

1.53

1.53

4.4

KFE-3.6-L

KFSE-3.6-L

 3.6

+ 0.1

–  0.08

5.40

5.87

7.14

1.53

1.53

5.5

KFE-4.2-L

KFSE-4.2-L

 4.2

+ 0.1

–  0.08

6.40

6.86

8.74

1.53

1.53

7.1

Order description

Length code “L”

(± 0.13)

Steel,

tin-plated

Stainless steel,

passivated

KFE-M3-L

KFSE-M3-L

3

4

6

8

10

KFE-3.6-L

KFSE-3.6-L

3

4

6

8

10

KFE-4.2-L

KFSE-4.2-L

3

4

6

8

10

Thread depth t

min.

3

4

6

8

10

Types KFE, KFSE

Material
Type KFE:   Steel, tin-plated
Type KFSE:   Stainless steel 18/8 (AISI 300),

passivated

Use

n

For PC boards and other plastics (also for cast

aluminum and magnesium)

n

Type KFE up to HR

B

60

n

Type KFSE up to HR

B

70

n

When used in PC boards with plated thru-holes,

increase the hole dimension before thru-hole
plating process by 0.13 mm

Additional lengths upon request

Broaching standoffs

For plastics

background image

www.kvt-fastening.com

62

Example for solder-pad masks

Solder pad

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

H

in PC board

+ 0.08

0

d

2

± 0.08

d

3

± 0.13

m

± 0.13

h

max.

sm

min.*

sm

D

min.

KF2-M2 on tape

M2

4.3

4.19

5.56

1.5

1.53

1.53

6.2

KF2-M2.5 on tape

M2.5

4.8

4.68

5.56

1.5

1.53

1.53

6.2

KF2-M3 on tape

M3

4.8

4.68

5.56

1.5

1.53

1.53

6.2

KF2-M4 on tape

M4

7.0

6.86

8.74

2.0

1.53

1.53

9.4

KF2-M5 on tape

M5

7.5

7.37

9.53

3.0

1.53

1.53

10.3

1

2

* sm min. refers to “without extension below”

Type KF2 for SMT assembly

Advantages of SMT assembly

n

Fasteners can be fed automatically

n

No external work step needed to add fastening

points (e.g. press-in process)

n

No danger of damaging PC boards (danger

during press-in)

n

Reduced  handling

n

Time-saving

n

Process  safety

Material
Steel, tin-plated

Use
PC boards with and without plated thru-holes

n

Processing

1.    PEM

®

component with adhesive patch by means

of standard vacuum pipette

2.   PEM

®

component without adhesive patch by

means of special vacuum pipette

Surface mount nuts

On tape and reel for PC boards

background image

www.kvt-fastening.com

63

Pem

®

d

1

L

h

d

2

d

3

sm

Example for solder-pad masks

∅ D

∅ H

Solder pad

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

H

in PC board

+ 0.08

0

d

2

max.

d

3

± 0.13

h

max.

sm

min.

sm

D

min.

SMTSO-M2-L on tape

M2

3.73

3.60

5.56

1.53

1.53

6.20

SMTSO-M2.5-L on tape

M2.5

4.22

4.09

5.56

1.53

1.53

6.20

SMTSO-M3-L on tape

M3

4.22

4.09

5.56

1.53

1.53

6.20

SMTSO-M4-L on tape

M4

6.35

6.22

8.74

1.53

1.53

9.37

SMTSO-3.6-L on tape

 3.6

+ 0.1

–  0.08

5.41

5.28

7.14

1.53

1.53

7.77

SMTSO-4.2-L on tape

 4.2

+ 0.1

–  0.08

6.35

6.22

8.74

1.53

1.53

9.37

Order description

Length code “L”

(± 0.13)

SMTSO-M2-L on tape

2

3

4

6

8

10

SMTSO-M2.5-L on tape

2

3

4

6

8

10

SMTSO-M3-L on tape

2

3

4

6

8

10

SMTSO-M4-L on tape

2

3

4

6

8

10

SMTSO-3.6-L on tape

2

3

4

6

8

10

SMTSO-4.2-L on tape

2

3

4

6

8

10

Type SMTSO for SMT assembly

Advantages of SMT assembly

n

Fasteners can be fed automatically

n

No external work step needed to add fastening

points (e.g. press-in process)

n

No danger of damaging PC boards (danger

during press-in)

n

Reduced  handling

n

Time-saving

n

Process  safety

Material
Steel, tin-plated

Use
PC boards with and without plated thru-holes

Processing
PEM

®

component with adhesive patch by means

of standard vacuum pipette

Surface mount spacers

On tape and reel for PC boards

background image

www.kvt-fastening.com

64

1

2

with thr

eads

with thru-holes

Example for solder-pad masks

Solder pad

* sm min. refers to “without extension below”

3-D Data:

http://kvt.partcommunity.com

Order description

Thread

d

1

H

in PC board

+ 0.08

0

d

2

± 0.08

d

3

± 0.13

h

max.

sm

min.*

sm

D

min.

KFE-M3-L on tape

M3

4.8

4.68

5.56

1.53

1.53

6.2

KFE-3.6-L on tape

 3.6

+ 0.1

– 0.08

6.0

5.87

7.14

1.53

1.53

7.8

KFE-4.2-L on tape

 4.2

+ 0.1

–  0.08

7.0

6.86

8.74

1.53

1.53

9.4

Order description

Length code “L”

(± 0.13)

KFE-M3-L

3

4

6

8

10

KFE-3.6-L

3

4

6

8

10

KFE-4.2-L

3

4

6

8

10

Thread depth t

min.

3

4

6

8

10

Type KFE for SMT assembly

Advantages of SMT assembly

n

Fasteners can be fed automatically

n

No external work step needed to add fastening

points (e.g. press-in process)

n

No danger of damaging PC boards (danger

during press-in)

n

Reduced  handling

n

Time-saving

n

Process  safety

Material
Steel, tin-plated

Use
PC boards with and without plated thru-holes

Processing
1.    PEM

®

component with adhesive patch by means

of standard vacuum pipette

2.    PEM

®

component without adhesive patch by

means of special vacuum pipette

Surface mount spacers

On tape and reel for PC boards

background image

www.kvt-fastening.com

65

Pem

®

Thread

Type

Shank length

Sheet material

Installation

(kN)

Pushout

(N)

Torque-out

(Nm)

M2
M2.5
M3

S

CLS

0

Aluminum

6.7 – 8.9

280

0.90

1

400

1.13

2

750

1.47

0

Steel

11.2 – 15.6

470

1.47

1

550

1.70

2

1010

2.03

M3

SP

0

Stainless steel

35.6 – 44.5

575

1.58

1

725

1.92

2

1290

2.03

M4

S

CLS

0

Aluminum

11.2 – 13.4

300

2.37

1

470

2.60

2

970

4.00

0

Steel

18 – 27

490

2.95

1

645

4.00

2

1250

5.10

M4

SP

0

Stainless steel

40 – 49

645

3.38

1

800

4.18

2

1600

5.08

M5

SS

CLSS

0

Aluminum

11.2 – 15.6

300

3.00

1

480

3.60

2

845

5.70

0

Steel

18 – 38

530

3.60

1

800

4.50

2

1112

6.80

M5

SP

0

Stainless steel

42.3 – 51.2

800

3.95

1

1025

5.08

2

1775

6.77

M6

S

CLS

0

Aluminum

18 – 32

970

7.90

1

1580

10.20

2

14.10

0

Steel

27 – 36

1380

13.00

1

1760

17.00

2

M6

SP

1

Stainless steel

60

2000

17.00

M8

S

CLS

1

Aluminum

18 – 32

1570

13.60

2

18.10

1

Steel

27 – 36

1870

18.70

2

20.30

M10

H

Aluminum

22

1760

21.50

Steel

33

2020

27.10

Types S, SS, SP, CLS, CLSS, H

Specifications subject to change without notice

Technical data – self-clinching nuts

For metallic materials

background image

www.kvt-fastening.com

66

Thread

Max. nut

tightening

torque (Nm)

Sheet thickness

and material

Sheet

hardness

(Hr

B

)

Installation

(kN)

Pushout

(N)

Torque-out

(Nm)

Pull-through

(N)

Diameter

test bushing

M2.5

0.41

1.6 mm Aluminum

29

8.9

465

1.0

2600

3.1

1.5 mm Steel

59

11.1

740

2800

M3

0.74

1.6 mm Aluminum

29

12.9

600

1.7

3150

3.6

1.5 mm Steel

59

14.7

820

3840

M4

1.70

1.6 mm Aluminum

29

20.0

975

2.9

4448

4.6

1.5 mm Steel

59

28.9

1780

4.2

5650

M5

3.50

1.6 mm Aluminum

29

24.5

1070

3.5

5170

5.6

1.5 mm Steel

59

33.4

2000

6.5

6270

M6

5.90

2.4 mm Aluminum

28

28.9

1660

7.3

10200

6.6

2.2 mm Steel

46

44.5

2560

11.3

11300

M8

14.20

2.4 mm Aluminum

28

29.8

1910

11.3

10500

8.6

2.4 mm Steel

46

44.5

2890

19.2

15450

Type FH

Specifications subject to change without notice

Technical data – self-clinching studs

For metallic materials

background image

www.kvt-fastening.com

67

Pem

®

Thread

Type

Max. nut

tightening

torque

(Nm)

Sheet thickness

and material

Sheet

hardness

(Hr

B

)

Installation

(kN)

Pushout

(N)

Torque-out

(Nm)

Tensile

strength

(kN)

Diameter

test bushing

M5

HFH

4.4

1.50 mm Aluminum

15

13.0

800

5.4

12.8

6.35

HFH

1.50 mm Steel

65

26.0

1500

7.6

HFHS

1.62 mm Aluminum

35

12.4

800

5.4

7.3

HFHS

1.47 mm Steel

54

21.7

1500

6.4

M6

HFH

10.0

1.50 mm Aluminum

43

29.0

1270

14.0

18.1

7.49

HFH

1.50 mm Steel

59

33.0

1750

HFHS

1.62 mm Aluminum

35

15.4

1270

11.0

10.3

HFHS

1.60 mm Steel

45

24.6

1750

M8

HFH

21.7

2.30 mm Aluminum

39

35.6

1700

30.0

32.9

9.53

HFH

2.30 mm Steel

58

44.5

2200

HFHS

2.23 mm Aluminum

44

24.4

1700

20.0

18.8

HFHS

2.48 mm Steel

43

37.8

2100

M10

HFH

36.6

2.30 mm Aluminum

39

40.0

2445

36.0

52.2

11.56

HFH

2.30 mm Steel

58

54.0

3470

49.0

HFHS

2.30 mm Aluminum

44

33.3

2445

36.0

29.9

HFHS

2.30 mm Steel

46.7

3470

Types HFH, HFHD, HFHS, HFHDS
High-strength studs

n

Specifications subject to change without notice

n

Values also valid for studs with dog point lead-in

option

Technical data – self-clinching studs

For metallic materials

background image

www.kvt-fastening.com

68

Thread

Type

Max. nut

tightening

torqu

(Nm)

Sheet thickness

and material

Sheet

hardness

(Hr

B

)

Installation

(kN)

Pushout

(N)

Torque-out

(Nm)

Tensile

strength

(kN)

Diameter

test bushing

M5

HFE

4.40

1.00 mm Aluminum

27

37.7

690

8.1

9.7

7.40

1.00 mm Steel

67

51.1

1350

10.6

M6

HFE

10.00

1.00 mm Aluminum

27

39.0

750

11.8

14.2

8.20

1.00 mm Steel

67

60.0

1400

14.4

15.5

M8

HFE

21.70

1.50 mm Aluminum

22

42.0

1230

23.5

25.0

10.30

1.50 mm Steel

65

71.1

2400

33.9

27.5

Types HFE und HFED
High pull-through resistance studs

n

Specifications subject to change without notice

n

Values also valid for studs with dog point lead-in

option

Technical data – self-clinching studs

For metallic materials

background image

www.kvt-fastening.com

69

Pem

®

Thread

Type

Max. recom.

tightening
torque for

mating screw

(Nm)

Sheet material

1.5 mm Aluminum

1.5 mm Steel

Installation

(kN)

Pushout

(N)

Torque-out

(Nm)

Pull-

through

(N)

Installation

(kN)

Pushout

(N)

Torque-out

(Nm)

Pull-

through

(N)

M3

SO

0.55

4.9

710

1.24

1245

9.8

1000

2.15

1465

BSO

SOS

0.44

996

1172

BSOS

3.5M3

SO

0.55

7.6

1330

2.82

1245

14.7

1860

3.95

1465

BSO

SOS

0.44

996

1172

BSOS

M4

SO

2.0

10.7

1780

5.08

2575

17.8

2490

8.47

3110

BSO

SOS

1.6

2060

2488

BSOS

M5

SO

3.60

10.7

1780

5.08

2575

17.8

2490

8.47

3110

BSO

SOS

2.88

2060

2488

BSOS

Types SO, BSO, SOS, BSOS

Specifications subject to change without notice

Technical data – self-clinching standoffs

For metallic materials

background image

www.kvt-fastening.com

70

Nut and standoff pushout test set-up

Stud torque-out test set-up

Nut and standoff torque-out test set-up

Screw of grade

8.8 or higher

Torque wrench

Test strip

Hardened

threaded bushing

Screw of grade

8.8 or higher

Torque wrench

Test strip

Washer

Self-clinching nut

or standoff

Punch

Test apparatus

Test strip

Surface of

test apparatus

Bushing

Hole

Stud head diameter

+ 2.0 mm max.

Punch

Test apparatus

Screw of grade

8.8 or higher

Test strip

Anvil

Surface of

test apparatus

Hole

Nut head diameter

+ 1.6 mm max.

Stud pushout test set-up

Test set-ups

background image

www.kvt-fastening.com

71

Pem

®

background image

www.kvt-fastening.com

72

PEMSERTER

®

3000

PEMSERTER

®

3000MB™

PEMSERTER

®

4 AF

PEMSERTER

®

4

PEMSERTER

®

IN-DIE

PEMSERTER

®

2000

Flexible, powerful and safe – for reliable processing

No matter what requirements are placed on
fabrication, PEMSERTER

®

machines guarantee an

optimal installation of all PEM

®

self-clinching

fasteners.

From the manual entry-level model, to semi-
automated versions with feeding options, through
high-tech machines with the ability to feed four

different fastener types and even robotic interfaces,
PEM

®

offers a series of machines tailored to every

requirement. It’s also possible to feed fasteners
directly into the user’s press.

Would you like more details? Please request our
special catalog.

PEMSERTER

®

installation machines

PEMSERTER

®

3000 / 2000 / 4  AF / 4

background image

www.kvt-fastening.com

73

Pem

®

PEMSERTER

®

3000

PEMSERTER

®

2000

PEMSERTER

®

4 AF

PEMSERTER

®

4

Seconds per stroke

1

1.5

3

3

Ram force

71.2 kN

71.2 kN

53,4 kN

53.4 kN

Throat depth

610 mm

610 mm

457 mm

457 mm

Stainless steel technology

Automatic registration of ram force

Monitoring of ram force

Photo-optic self-monitoring safety
system

Tool changer – QX (4x)

º

º

QX drive

º

º

Second bowl feeder

º

º

Touchscreen control

Ind. PC Windows XP

PLC

PLC

FLM – fastener length monitoring

º

º

Vacuum monitoring

Operating software

Storage of digital images

Failure-analysis software

Robot interface ability

º

Delay time/timer

Tool protection

Fastener counter

Laser spot

Batch counter

Bowl sizes

up to M10

up to M10

up to

M6

Type of drive

Servo motor

hydropneumatic

pneumatic

Air

Electric connection

400V/50Hz/32 Amp.

230V/50Hz/16 Amp.

230V/50Hz/16 Amp.

Air connection

5 – 6 bar

6 – 8 bar

max. 6 bar

max. 6 bar

Height

2.080 mm

1.930 mm

1.676 mm

1.676 mm

Width

920 mm

920 mm

690 mm

690 mm

Depth

1.260 mm

1.260 mm

940 mm

940 mm

Weight

approx. 1.235 kg

approx. 1.135 kg

ca. 390 kg

approx. 308 kg

Training and commissioning

Guarantee/years

1

1

1

1

•  Standard  |  º  optional  |  –  unavailable

PEMSERTER

®

technical overview

PEMSERTER

®

3000 / 2000 / 4  AF / 4

background image

74

Trademarks

It is possible to identify our PEM

®

self-clinching fasteners with their embossed supplier identification.

Nuts and standoffs – annular grooves

Studs and quick-locking panel fasteners – dimple with round embossing

Nuts and Hybrid

®

(metalloplastic)

Quality Assurance

Quality assurance has the highest priority at KVT-Koenig GmbH. We fulfill the continually increasing quality
requirements in industry through an efficient and integrated quality management program.

Supplier identification – quality assurance

background image

Access solutions

Thread inserts

Special processes

2)

Installation technology

Blind rivet nuts

Lock nuts

Adhesives  and

sealants

1)

Self-clinching

fasteners

Quick fastening

elements and clips

Pressure intensifiers

3)

Plugs

Stud welding systems

1)

Quick release pins

and spring plungers

Quick connectors

4)

Logistic systems

Solutioneering

Blind rivet technology

Construction

fasteners

2)

Bonding fasteners

Fastening, sealing and flow control solutions for complex
applications

The extensive KVT-Fastening portfolio offers optimal solutions
for your most challenging applications. The products included in
this catalog represent only a selection from our entire product
portfolio. Upon request, we will be pleased to provide additional
information or an individual consultation to you.

For more information about our range
of products and order at our E-shop,
please visit
www.kvt-fastening.com

1)

Not available in Germany.

2)

Only available in Switzerland.

3)

Not available in Switzerland.

4)

Not available in Austria.

KVT-Fastening – Fastening technology

Intelligent logistic systems

Bossard SmartBin and SmartLabel are
intelligent logistics systems which moni-
tor stock with total reliability and ensure
stock replenishment automatically.
An online system transmits the data to the
Bossard server, and this – if necessary –
triggers an order. These systems ensure
quick and easy availability of C-parts
while production is running.

Competent analysis for efficient
solutions

KVT-Fastening’s highly qualified experts
analyze the given task at hand.
Based on this sound understanding of
the project, they then develop ideal
solutions that are economical, efficient,
and safe.

background image

www.kvt-fastening.com

©KVT / PEM / EN / 07-2015 / qu / W

e r

eserv

e the right t

o mak

e changes

KVT-Fastening AG

Dietikon/Zürich | Switzerland
Tel: +41 44 743 33 33
info-CH@kvt-fastening.com
www.kvt-fastening.ch

KVT-Fastening GmbH

Illerrieden | Germany
Tel: +49 7306 782 - 0
info-DE@kvt-fastening.com
www.kvt-fastening.de

KVT-Fastening GmbH

Asten/Linz | Austria
Tel: +43 7224 67 09 0
info-AT@kvt-fastening.com
www.kvt-fastening.at

KVT-Fastening Sp. z o.o.

Radom | Poland
Tel: +48 58 762 17 80
info-PL@kvt-fastening.com
www.kvt-fastening.pl

KVT-Fastening S.R.L.

Bucure¸sti | Romania
Tel: +40 37 1381155
info-RO@kvt-fastening.com
www.kvt-fastening.ro

KVT-Fastening spol. s.r.o.

Bratislava | Slovakia
Tel: +421 9 11102510
info-SK@kvt-fastening.com
www.kvt-fastening.sk

KVT-Tehnika pritrjevanja d.o.o.

Ljubljana | Slovenia
Tel: +386 1 2808019
info-SI@kvt-fastening.com
www.kvt-fastening.si

KVT-Fastening s.r.o.

Brno | Czech  Republic
Tel: +420 547 125200201
info-CZ@kvt-fastening.com
www.kvt-fastening.cz

KVT-Fastening Kft.

Budapest | Hungary
Tel: +36 1 769 0925
info-HU@kvt-fastening.com
www.kvt-fastening.hu